if the code was sent in response to anything but a STORE, we'd overwrite
a data pointer in one of our imap_cmd subclasses, an allocator data
structure, or the start of the next allocation, with an int that was
completely under the server's control. it's plausible that this could be
exploited for remote code execution.
to avoid this, we could ensure that the object is of the right type
prior to casting, by using a new flag in the parameter block. but it's
easier to just dispose of the out_uid field altogether and reuse the uid
field that is present in the parameter block anyway, but was used only
for FETCH commands so far.
this problem was found by Lukas Braun <koomi@moshbit.net> using a
fuzzer.
while it's technically reasonable to expect the user to match the
server's casing of INBOX if they set Path, this might come as a
surprise to those who know that the IMAP INBOX is case-insensitive.
so tolerate any casing instead. as a minor side effect, we'd now even be
able to deal with a server using different casing in NAMESPACE and LIST.
in particular, this covers the case of a mailbox being replaced with an
empty new one, which would subsequently lead to the opposite end being
emptied as well, which would typically be undesired.
also add plenty of comments.
don't print the actual values, which are meaningless technicalities
to the average user, and can be obtained separately for debugging if
really necessary.
also, fix the omission of the affected mailboxes from one of the
messages.
in particular, '..' in the name could be used to escape the Path/Inbox
of a Maildir Store, which could be exploited for stealing or deleting
data, or staging a (mild) DoS attack.
fastmail sends flags containing ']' in PERMANENTFLAGS, which is formally
illegal. however, if we parse the embedded list before looking for the
response code's closing ']', things work out fine.
as a side effect we won't complain about similarly or completely
malformed response codes we don't recognize at all, which may or may not
be considered an improvement ...
on error, parse_imap_list() needs to reset the nesting level in the
state, as imap_socket_read() uses that as an indicator whether list
parsing is ongoing.
while the spec says that the server SHOULD not send FETCH responses
about STORE FLAGS when .SILENT is used, at least gmail and fastmail seem
to do it nonetheless. also, in case of concurrent flag updates on the
affected messages such responses can be legitimately sent.
in earlier versions of mbsync this would lead to duplicate messages
piling up in the store, though that would pose no problem at that point.
In POSIX, poll() should be accessible using <poll.h>, although most
implementations keep <sys/poll.h> to avoid breakage. This fixes some
warnings when building on musl.
The SASL library will refuse to use the EXTERNAL module when no auth id
is set a priori.
Tested to work with Dovecot, using TLS client certificates for
authentication.
to test async operation of the syncing core while using the synchronous
maildir driver, we add a mode to the proxy driver where it queues
callback invocations to the next main loop iteration.
the struct declarations got uglier, but their usage requires a lot fewer
explicit references to the parent struct (though some are added where
using the derived struct is more practical now).
we also use something i'd term "covariant members": derivatives of
store_t also reference derivatives of store_conf_t, etc., which
drastically cuts down the number of casts.
fwiw, to achieve this with "proper" inheritance in C++, we'd use
covariant getter functions which hide the still existing casts.
C11 is almost a decade old now, and compilers supported that feature
even longer than that, so i don't expect this to be a problem.
use the indentation of the placeholder, not the replacement.
this doesn't matter right now, as all placeholders are indented by one
step, but that will change soon.
the indent function cannot be inlined into the substitution, as for some
reason ^ then matches the end of the string, not the embedded line
starts (with perl v5.32). also, $1 needs to go into a temporary anyway.
this is a de-optimization, but it makes the code consistent with the
other sections (which do not use the shortcut due to having to
post-process the data or being encapsulated by a function call).
that's mostly hypothetical, but let's not make assumptions.
this also adds EXPUNGE response handling to make total_msgs reliable. in
principle, this affects the post-SELECT UIDNEXT fallback as well, but
there the racing window is so short that this barely improves anything.
amends 94022a67.
the uidnext query following message stores can be interleaved with
message fetches. that means that we cannot rely on the 1st command in
flight being that query. but instead of iterating over all commands in
flight, move the uidnext query flag to imap_store (and make sure to
check for the presence of a message body before testing it) - this
avoids the loop and an extra byte in every command.
this also makes it clear that the query is mutually exclusive with
loading messages (the untagged responses are not distinguishable).
don't say DRV_CANCELED when it's really DRV_STORE_BAD, as apart from
being just wrong, it lead to the confusing effect of canceling a store
as the result of a supposed cancellation of the same store.
properly distribute the certificates between the SSL context's trust
store and our host cert list.
as a drive-by, clean up some nasty type casts at the cost of including
a second OpenSSL header into socket.h.
delay reporting success of STORE FLAGS until a subsequent CHECK
succeeds.
this fixes (inverse flag change propagation) and (deletes not being
propagated) after an interruption due to prematurely logged flag
updates.
delay the creation of the new state and journal until there is actually
something interesting to write. this saves some cpu cycles and prolongs
ssd life a whee bit.
now that expiration order is determined by a single loop ordered by
far-side UIDs, it is no longer necessary to accurately track the highest
seen UID.
as a side effect, this fixes a problem reported (way too long ago) by
Yuri D'Elia: we failed to up newmaxuid for messages we produced
ourselves, so we would keep enumerating the same messages until we also
propagated externally generated messages from that mailbox - which might
have been never for the server side of archive/trash mailboxes.
we can do that, as unpaired near-side messages are ignored anyway.
this mildly changes expiration order, as near-side messages that
existed for a long time but were propagated much later will be expired
later. however, that has no practical relevance.
this is mostly theoretical, as at this point no updates to the message
list can have actually happened. but it's future-proof and consistent
with the near-side loop.
we already didn't propagate messages which would be instantly expunged
from the target, but failed to cancel propagations that were already
scheduled before we got interrupted. this matters a bit when the
resumption happens significantly later than the initial attempt, giving
the user time to mark messages on the source as deleted.
the 'pending' and 'skipped' sync record states are mutually exclusive
with having a complementary message, so there is no point in testing it
explicitly.
amends bd5fb6ff.
we need to pass a different "boundary" UID to driver_t::load_box() for
every OPEN_* flag that queries a partial range:
- OPEN_FIND refers to messages newer than all we know about
- OPEN_OLD_IDS refers to messages which are paired
- OPEN_{OLD,NEW}_SIZE refers to messages (not) above the committed
boundary of already propagated messages
we treated the 3rd like the 2nd, which was just wrong - the actual
boundary may be lower or higher, so we'd produce wrong results when
MaxSize was set and only one of New and ReNew was requested.
the underlying metaphor refers to an inhumane practice, so using it
casually is rightfully offensive to many people. it isn't even a
particularly apt metaphor, as it suggests a strict hierarchy that is
counter to mbsync's highly symmetrical mode of operation.
the far/near terminology has been chosen as the replacement, as it is a
natural fit for the push/pull terminology. on the downside, due to these
not being nouns, a few uses are a bit awkward, and several others had to
be amended to include 'side'. also, it's conceptually quite close to
remote/local, which matches the typical use case, but is maybe a bit too
suggestive of actually non-existing limitations.
the new f/n suffixes of the -C/-R/-X options clash with pre-existing
options, so direct concatenation of short options is even less practical
than before (some suffixes of -D already clashed), but doing that leads
to unreadable command lines anyway.
as with previous deprecations, all pre-existing command line and config
options keep working, but yield a warning. the state files are silently
upgraded.
this is better than using PassCmd, as it allows the keychain manager to
identify the calling process and therefore use a selective whitelist.
unlike in the now removed example, we use an "internet password" for the
imap protocol, rather than a "generic password" - this seems more
appropriate.
based on a patch by Oliver Runge <oliver.runge@gmail.com>
It was already possible to retrieve passwords from arbitrary commands.
But this goes only half the way to allowing automated derivation of
login credentials, as some environments may also have different user
names based on the system. Therefore, add the UserCmd option to
complement PassCmd.
Based on a patch series by Patrick Steinhardt <ps@pks.im>
makes the code less cluttered, and it's harder to introduce leaks.
this has the hypothetical disadvantage that due to freeing being
delayed, the peak memory usage would rise significantly if we chained to
another parse_list() call which produces a big list while already
holding a big list, but that isn't the case anywhere.
... by making a lot of objects unsigned, and some signed.
casts which lose precision and change the sign in one go (ssize_t and
time_t to uint on LP64) are made explicit as well.
this does specifically *not* cover about a bazillion warnings about
size_t being shrunk to uint - these make no sense given the expected
data set size.
mostly ATTR_PRINTFLIKE(*, 0) for functions with a va_list argument.
also, one ATTR_NORETURN and one ATTR_UNUSED, both on functions.
also, an explicit suppression for a format string stored in a variable.
this is mostly to work around the fact that both gcc and clang won't
accept the format string declaration (i.e., will complain with
-Wformat-nonliteral) if the *called* function does not actually take a
va_list.
on the upside, it makes one caller cleaner. yay ...
this is actually potentially counterproductive, as people who have set
SSLVersions and fail to adjust it will _lose_ tls 1.3 support. however,
without the option being there, people (incorrectly) believe that tls
1.3 is not supported.
otherwise the server would interpret it as INBOX contrary to our
expectations, which might lead to moderately surprising effects.
if you really want to sync your ~/maildir/inbox to the IMAP INBOX,
specify it as the Maildir Store's Inbox.
Some distributions (e.g. Fedora) added support for system wide crypto
policies. This is supported in most common crypto libraries including
OpenSSL. Applications can override this policy using their own cipher
string. This commit adds support for specifying the cipher string in
the mbsync configuration.
For example, to exclude Diffie-Hellman, the user can specify
CipherString "DEFAULT:!DH"
in the IMAP Account's configuration.
this is semantically cleaner, and fixes storing the flags in the rare
case that flags are not being synced and the target is not being
expunged, as in this case flags are queried only during the actual
propagation.
the workaround for -Wformat triggered -Wformat-nonliteral in turn.
so instead go back to using pragmas and add a proper gcc version check.
this also works with clang - mostly for qt-creator's code model, which
is clang-based.
amends/reverts 55e65147.
