isync/src/mbsync.1

.\" mbsync - mailbox synchronizer
.\" Copyright (C) 2000-2002 Michael R. Elkins <me@mutt.org>
.\" Copyright (C) 2002-2004,2011-2015 Oswald Buddenhagen <ossi@users.sf.net>
.\" Copyright (C) 2004 Theodore Y. Ts'o <tytso@mit.edu>
.\"
.\"  This program is free software; you can redistribute it and/or modify
.\"  it under the terms of the GNU General Public License as published by
.\"  the Free Software Foundation; either version 2 of the License, or
.\"  (at your option) any later version.
.\"
.\"  This program is distributed in the hope that it will be useful,
.\"  but WITHOUT ANY WARRANTY; without even the implied warranty of
.\"  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
.\"  GNU General Public License for more details.
.\"
.\"  You should have received a copy of the GNU General Public License
.\"  along with this program.  If not, see <http://www.gnu.org/licenses/>.
.\"
.\" As a special exception, mbsync may be linked with the OpenSSL library,
.\" despite that library's more restrictive license.
.
.TH mbsync 1 "2015 Mar 22"
.
.SH NAME
mbsync - synchronize IMAP4 and Maildir mailboxes
.
.SH SYNOPSIS
\fBmbsync\fR [\fIoptions\fR ...] {{\fIchannel\fR[\fB:\fIbox\fR[{\fB,\fR|\fB\\n\fR}...]]|\fIgroup\fR} ...|\fB-a\fR}
.
.SH DESCRIPTION
\fBmbsync\fR is a command line application which synchronizes mailboxes;
currently Maildir and IMAP4 mailboxes are supported.
New messages, message deletions and flag changes can be propagated both ways;
the operation set can be selected in a fine-grained manner.
.br
Synchronization is based on unique message identifiers (UIDs), so no
identification conflicts can occur (unlike with some other mail synchronizers).
OTOH, \fBmbsync\fR is susceptible to UID validity changes (but will recover
just fine if the change is unfounded).
Synchronization state is kept in one local text file per mailbox pair;
these files are protected against concurrent \fBmbsync\fR processes.
Mailboxes can be safely modified while \fBmbsync\fR operates
(see \fBINHERENT PROBLEMS\fR below for a minor exception).
Multiple replicas of each mailbox can be maintained.
.
.SH OPTIONS
.TP
\fB-c\fR, \fB--config\fR \fIfile\fR
Read configuration from \fIfile\fR.
By default, the configuration is read from ~/.mbsyncrc.
.TP
\fB-a\fR, \fB--all\fR
Select all configured channels. Any channel/group specifications on the command
line are ignored.
.TP
\fB-l\fR, \fB--list\fR
Don't synchronize anything, but list all mailboxes in the selected channels
and exit.
.TP
\fB-C\fR[\fBf\fR][\fBn\fR], \fB--create\fR[\fB-far\fR|\fB-near\fR]
Override any \fBCreate\fR options from the config file. See below.
.TP
\fB-R\fR[\fBf\fR][\fBn\fR], \fB--remove\fR[\fB-far\fR|\fB-near\fR]
Override any \fBRemove\fR options from the config file. See below.
.TP
\fB-X\fR[\fBf\fR][\fBn\fR], \fB--expunge\fR[\fB-far\fR|\fB-near\fR]
Override any \fBExpunge\fR options from the config file. See below.
.TP
{\fB-n\fR|\fB-N\fR|\fB-d\fR|\fB-f\fR|\fB-0\fR|\fB-F\fR},\
 {\fB--new\fR|\fB--renew\fR|\fB--delete\fR|\fB--flags\fR|\fB--noop\fR|\fB--full\fR}
.TP
\r{\fB-L\fR|\fB-H\fR}[\fBn\fR][\fBN\fR][\fBd\fR][\fBf\fR],\
 {\fB--pull\fR|\fB--push\fR}[\fB-new\fR|\fB-renew\fR|\fB-delete\fR|\fB-flags\fR]
Override any \fBSync\fR options from the config file. See below.
.TP
\fB-h\fR, \fB--help\fR
Display a summary of command line options.
.TP
\fB-v\fR, \fB--version\fR
Display version information.
.TP
\fB-V\fR, \fB--verbose\fR
Enable \fIverbose\fR mode, which displays what is currently happening.
.TP
\fB-D\fR[\fBC\fR][\fBd\fR|\fBD\fR][\fBm\fR][\fBM\fR][\fBn\fR|\fBN\fR][\fBs\fR]\fR]\fR,\
 \fB--debug\fR[\fB-crash\fR|\fB-driver\fR|\fB-driver-all\fR|\fB-maildir\fR|\fB-main\fR|\fB-net\fR|\fB-net-all\fR|\fB-sync\fR]
Enable debugging categories:
.in +4
\fBC\fR, \fBcrash\fR - use built-in crash handler
.br
\fBd\fR, \fBdriver\fR - print driver calls (metadata only)
.br
\fBD\fR, \fBdriver-all\fR - print driver calls (including messages)
.br
\fBm\fR, \fBmaildir\fR - print maildir debug info
.br
\fBM\fR, \fBmain\fR - print main debug info
.br
\fBn\fR, \fBnet\fR - print network traffic (protocol only)
.br
\fBN\fR, \fBnet-all\fR - print network traffic (including payloads)
.br
\fBs\fR, \fBsync\fR - print synchronization debug info
.in -4
All categories except \fBcrash\fR implictly enable \fIverbose\fR mode.
Without category specification, all categories except net-all are enabled.
.TP
\fB-q\fR, \fB--quiet\fR
Suppress progress counters (this is implicit if stdout is no TTY,
or any debugging categories are enabled) and notices.
If specified twice, suppress warning messages as well.
.
.SH CONFIGURATION
The configuration file is mandatory; \fBmbsync\fR will not run without it.
Lines starting with a hash mark (\fB#\fR) are comments and are ignored entirely.
Configuration items are keywords followed by one or more arguments;
arguments containing spaces must be enclosed in double quotes (\fB"\fR),
and literal double quotes and backslashes (\fB\\\fR) must be backslash-escaped.
All keywords (including those used as arguments) are case-insensitive.
Bash-like home directory expansion using the tilde (\fB~\fR) is supported
in all options which represent local paths.
There are a few global options, the rest applies to particular sections.
Sections are started by a section keyword and are terminated by an empty line
or end of file.
Every section defines an object with an identifier unique within that
object class.
.P
There are two basic object classes: Stores and Channels. A Store defines
a collection of mailboxes; basically a folder, either local or remote.
A Channel connects two Stores, describing the way the two are synchronized.
.br
There are two auxiliary object classes: Accounts and Groups. An Account
describes the connection part of remote Stores, so a server connection can be
shared between multiple Stores. A Group aggregates multiple Channels to
save typing on the command line.
.P
File system locations (in particular, \fBPath\fR and \fBInbox\fR) use the
Store's internal path separators, which may be slashes, periods, etc., or
even combinations thereof.
.br
Mailbox names, OTOH, always use canonical path separators, which are
Unix-like forward slashes.
.
.SS All Stores
These options can be used in all supported Store types.
.br
In this context, the term "remote" describes the second Store within a Channel,
and not necessarily a remote server.
.br
The special mailbox \fBINBOX\fR exists in every Store; its physical location
in the file system is Store type specific.
.
.TP
\fBPath\fR \fIpath\fR
The location of the Store in the (server's) file system.
If this is no absolute path, the reference point is Store type specific.
This string is prepended to the mailbox names addressed in this Store,
but is not considered part of them; this is important for \fBPatterns\fR
in the Channels section.
Note that you \fBmust\fR append a slash if you want to specify an entire
directory.
(Default: none)
.
.TP
\fBMaxSize\fR \fIsize\fR[\fBk\fR|\fBm\fR][\fBb\fR]
Messages larger than \fIsize\fR will have only a small placeholder message
propagated into this Store. To propagate the full message, it must be
flagged in either Store; that can be done retroactively, in which case
the \fBReNew\fR operation needs to be executed instead of \fBNew\fR.
This is useful for avoiding downloading messages with large attachments
unless they are actually needed.
Caveat: Setting a size limit on a Store you never read directly (which is
typically the case for servers) is not recommended, as you may never
notice that affected messages were not propagated to it.
.br
\fBK\fR and \fBM\fR can be appended to the size to specify KiBytes resp.
MeBytes instead of bytes. \fBB\fR is accepted but superfluous.
If \fIsize\fR is 0, the maximum message size is \fBunlimited\fR.
(Default: \fI0\fR)
.
.TP
\fBMapInbox\fR \fImailbox\fR
Create a virtual mailbox (relative to \fBPath\fR) which aliases
the \fBINBOX\fR. Makes sense in conjunction with \fBPatterns\fR in the
Channels section, though with a Maildir near side, you probably want to
place \fBInbox\fR under \fBPath\fR instead.
This virtual mailbox does not support subfolders.
.
.TP
\fBFlatten\fR \fIdelim\fR
Flatten the hierarchy within this Store by substituting the canonical
hierarchy delimiter \fB/\fR with \fIdelim\fR.
This can be useful when the MUA used to access the Store provides
suboptimal handling of hierarchical mailboxes, as is the case with
\fBMutt\fR.
A common choice for the delimiter is \fB.\fR.
.br
Note that flattened sub-folders of the \fBINBOX\fR always end up
under \fBPath\fR, including the "INBOX\fIdelim\fR" prefix.
.
.TP
\fBTrash\fR \fImailbox\fR
Specifies a mailbox (relative to \fBPath\fR) to copy deleted messages to
prior to expunging.
See \fBRECOMMENDATIONS\fR and \fBINHERENT PROBLEMS\fR below.
(Default: none)
.
.TP
\fBTrashNewOnly\fR \fByes\fR|\fBno\fR
When trashing, copy only not yet propagated messages. This makes sense if the
remote Store has a \fBTrash\fR as well (with \fBTrashNewOnly\fR \fBno\fR).
(Default: \fBno\fR)
.
.TP
\fBTrashRemoteNew\fR \fByes\fR|\fBno\fR
When expunging the remote Store, copy not yet propagated messages to this
Store's \fBTrash\fR. When using this, the remote Store does not need an own
\fBTrash\fR at all, yet all messages are archived.
(Default: \fBno\fR)
.
.SS Maildir Stores
The reference point for relative \fBPath\fRs is the current working directory.
.P
As \fBmbsync\fR needs UIDs, but no standardized UID storage scheme exists for
Maildir, \fBmbsync\fR supports two schemes, each with its pros and cons.
.br
The \fBnative\fR scheme is stolen from the latest Maildir patches to \fBc-client\fR
and is therefore compatible with \fBpine\fR. The UID validity is stored in a
file named .uidvalidity; the UIDs are encoded in the file names of the messages.
.br
The \fBalternative\fR scheme is based on the UID mapping used by \fBisync\fR
versions 0.8 and 0.9.x. The invariant parts of the file names of the messages
are used as keys into a Berkeley database named .isyncuidmap.db, which holds
the UID validity as well.
.br
The \fBnative\fR scheme is faster, more space efficient, endianness independent
and "human readable", but will be disrupted if a message is copied from another
mailbox without getting a new file name; this would result in duplicated UIDs
sooner or later, which in turn results in a UID validity change, making
synchronization fail.
The \fBalternative\fR scheme would fail if a MUA changed a message's file name
in a part \fBmbsync\fR considers invariant; this would be interpreted as a
message deletion and a new message, resulting in unnecessary traffic.
.br
\fBMutt\fR is known to work fine with both schemes.
.br
Use \fBmdconvert\fR to convert mailboxes from one scheme to the other.
.
.TP
\fBMaildirStore\fR \fIname\fR
Define the Maildir Store \fIname\fR, opening a section for its parameters.
.
.TP
\fBAltMap\fR \fByes\fR|\fBno\fR
Use the \fBalternative\fR UID storage scheme for mailboxes in this Store.
This does not affect mailboxes that do already have a UID storage scheme;
use \fBmdconvert\fR to change it.
See \fBRECOMMENDATIONS\fR below.
(Default: \fBno\fR)
.
.TP
\fBInbox\fR \fIpath\fR
The location of the \fBINBOX\fR. This is \fInot\fR relative to \fBPath\fR,
but it is allowed to place the \fBINBOX\fR inside the \fBPath\fR.
(Default: \fI~/Maildir\fR)
.
.TP
\fBInfoDelimiter\fR \fIdelim\fR
The character used to delimit the info field from a message's basename.
The Maildir standard defines this to be the colon, but this is incompatible
with DOS/Windows file systems.
(Default: the value of \fBFieldDelimiter\fR)
.
.TP
\fBSubFolders\fR \fBVerbatim\fR|\fBMaildir++\fR|\fBLegacy\fR
The on-disk folder naming style used for hierarchical mailboxes.
This option has no effect when \fBFlatten\fR is used.
.br
Suppose mailboxes with the canonical paths \fBtop/sub/subsub\fR and
\fBINBOX/sub/subsub\fR, the styles will yield the following on-disk paths:
.br
\fBVerbatim\fR - \fIPath\fB/top/sub/subsub\fR and \fIInbox\fB/sub/subsub\fR
(this is the style you probably want to use)
.br
\fBMaildir++\fR - \fIInbox\fB/.top.sub.subsub\fR and \fIInbox\fB/..sub.subsub\fR
(this style is compatible with Courier and Dovecot - but note that
the mailbox metadata format is \fInot\fR compatible).
Note that attempts to set \fBPath\fR are rejected in this mode.
.br
\fBLegacy\fR - \fIPath\fB/top/.sub/.subsub\fR and \fIInbox\fB/.sub/.subsub\fR
(this is \fBmbsync\fR's historical style)
.br
(Default: unset; will error out when sub-folders are encountered)
.
.SS IMAP4 Accounts
.TP
\fBIMAPAccount\fR \fIname\fR
Define the IMAP4 Account \fIname\fR, opening a section for its parameters.
.
.TP
\fBHost\fR \fIhost\fR
Specify the DNS name or IP address of the IMAP server.
.br
If \fBTunnel\fR is used, this setting is needed only if \fBSSLType\fR is
not \fBNone\fR and \fBCertificateFile\fR is not used,
in which case the host name is used for certificate subject verification.
.
.TP
\fBPort\fR \fIport\fR
Specify the TCP port number of the IMAP server.  (Default: 143 for IMAP,
993 for IMAPS)
.br
If \fBTunnel\fR is used, this setting is ignored.
.
.TP
\fBTimeout\fR \fItimeout\fR
Specify the connect and data timeout for the IMAP server in seconds.
Zero means unlimited.
(Default: \fI20\fR)
.
.TP
\fBUser\fR \fIusername\fR
Specify the login name on the IMAP server.
.
.TP
\fBUserCmd\fR [\fB+\fR]\fIcommand\fR
Specify a shell command to obtain a user rather than specifying a
user directly. This allows you to script retrieving user names.
The command must produce exactly one line on stdout; the trailing newline
is optional.
Prepend \fB+\fR to the command to indicate that it produces TTY output
(e.g., a prompt); failure to do so will merely produce messier output.
.
.TP
\fBPass\fR \fIpassword\fR
Specify the password for \fIusername\fR on the IMAP server.
Note that this option is \fInot\fR required.
If neither a password nor a password command is specified in the
configuration file, \fBmbsync\fR will prompt you for a password.
.
.TP
\fBPassCmd\fR [\fB+\fR]\fIcommand\fR
Specify a shell command to obtain a password rather than specifying a
password directly. This allows you to use password files and agents.
The command must produce exactly one line on stdout; the trailing newline is
optional.
Prepend \fB+\fR to the command to indicate that it produces TTY output
(e.g., a decryption password prompt); failure to do so will merely produce
messier output.
.
.TP
\fBUseKeychain\fR \fByes\fR|\fBno\fR
Whether to use the macOS Keychain to obtain the password.
(Default: \fBno\fR)
.IP
The neccessary keychain item can be created this way:
.RS
.IP
.nh
.B security add-internet-password \-r imap \-s
.I Host
.B \-a
.I User
.B \-w
.I password
[
.B \-T
.I /path/to/mbsync
]
.hy
.RE
.
.TP
\fBTunnel\fR \fIcommand\fR
Specify a command to run to establish a connection rather than opening a TCP
socket.  This allows you to run an IMAP session over an SSH tunnel, for
example.
.
.TP
\fBAuthMechs\fR \fItype\fR ...
The list of acceptable authentication mechanisms.
In addition to the mechanisms listed in the SASL registry (link below),
the legacy IMAP \fBLOGIN\fR mechanism is known.
The wildcard \fB*\fR represents all mechanisms that are deemed secure
enough for the current \fBSSLType\fR setting.
The actually used mechanism is the most secure choice from the intersection
of this list, the list supplied by the server, and the installed SASL modules.
(Default: \fB*\fR)
.
.TP
\fBSSLType\fR {\fBNone\fR|\fBSTARTTLS\fR|\fBIMAPS\fR}
Select the connection security/encryption method:
.br
\fBNone\fR - no security.
This is the default when \fBTunnel\fR is set, as tunnels are usually secure.
.br
\fBSTARTTLS\fR - security is established via the STARTTLS extension
after connecting the regular IMAP port 143. Most servers support this,
so it is the default (unless a tunnel is used).
.br
\fBIMAPS\fR - security is established by starting SSL/TLS negotiation
right after connecting the secure IMAP port 993.
.
.TP
\fBSSLVersions\fR [\fBSSLv3\fR] [\fBTLSv1\fR] [\fBTLSv1.1\fR] [\fBTLSv1.2\fR] [\fBTLSv1.3\fR]
Select the acceptable SSL/TLS versions.
Use old versions only when the server has problems with newer ones.
(Default: [\fBTLSv1\fR] [\fBTLSv1.1\fR] [\fBTLSv1.2\fR] [\fBTLSv1.3\fR]).
.
.TP
\fBSystemCertificates\fR \fByes\fR|\fBno\fR
Whether the system's default CA (certificate authority) certificate
store should be used to verify certificate trust chains. Disable this
if you want to trust only hand-picked certificates.
(Default: \fByes\fR)
.
.TP
\fBCertificateFile\fR \fIpath\fR
File containing additional X.509 certificates used to verify server
identities.
It may contain two types of certificates:
.RS
.IP Host
These certificates are matched only against the received server certificate
itself.
They are always trusted, regardless of validity.
A typical use case would be forcing acceptance of an expired certificate.
.br
These certificates may be obtained using the \fBmbsync-get-cert\fR tool;
make sure to verify their fingerprints before trusting them, or transfer
them securely from the server's network (if it can be trusted beyond the
server itself).
.IP CA
These certificates are used as trust anchors when building the certificate
chain for the received server certificate.
They are used to supplant or supersede the system's trust store, depending
on the \fBSystemCertificates\fR setting;
it is not necessary and not recommended to specify the system's trust store
itself here.
The trust chains are fully validated.
.RE
.
.TP
\fBClientCertificate\fR \fIpath\fR
File containing a client certificate to send to the server.
\fBClientKey\fR should also be specified.
.br
Note that client certificate verification is usually not required,
so it is unlikely that you need this option.
.
.TP
\fBClientKey\fR \fIpath\fR
File containing the private key corresponding to \fBClientCertificate\fR.
.
.TP
\fBCipherString\fR \fIstring\fR
Specify OpenSSL cipher string for connections secured with TLS up to
version 1.2 (but not 1.3 and above).
The format is described in \fBciphers\fR\|(1).
(Default: empty, which implies system wide policy).
.
.TP
\fBPipelineDepth\fR \fIdepth\fR
Maximum number of IMAP commands which can be simultaneously in flight.
Setting this to \fI1\fR disables pipelining.
This is mostly a debugging option, but may also be used to limit average
bandwidth consumption (GMail may require this if you have a very fast
connection), or to spare flaky servers like M$ Exchange.
(Default: \fIunlimited\fR)
.
.TP
\fBDisableExtension\fR[\fBs\fR] \fIextension\fR ...
Disable the use of specific IMAP extensions.
This can be used to work around bugs in servers
(and possibly \fBmbsync\fR itself).
(Default: empty)
.
.SS IMAP Stores
The reference point for relative \fBPath\fRs is whatever the server likes it
to be; probably the user's $HOME or $HOME/Mail on that server. The location
of \fBINBOX\fR is up to the server as well and is usually irrelevant.
.TP
\fBIMAPStore\fR \fIname\fR
Define the IMAP4 Store \fIname\fR, opening a section for its parameters.
.
.TP
\fBAccount\fR \fIaccount\fR
Specify which IMAP4 Account to use. Instead of defining an Account and
referencing it here, it is also possible to specify all the Account options
directly in the Store's section - this makes sense if an Account is used for
one Store only anyway.
.
.TP
\fBUseNamespace\fR \fByes\fR|\fBno\fR
Selects whether the server's first "personal" NAMESPACE should be prefixed to
mailbox names. Disabling this makes sense for some broken IMAP servers.
This option is meaningless if a \fBPath\fR was specified.
(Default: \fByes\fR)
.
.TP
\fBPathDelimiter\fR \fIdelim\fR
Specify the server's hierarchy delimiter.
(Default: taken from the server's first "personal" NAMESPACE)
.br
Do \fInot\fR abuse this to re-interpret the hierarchy.
Use \fBFlatten\fR instead.
.
.TP
\fBSubscribedOnly\fR \fByes\fR|\fBno\fR
Selects whether to synchronize only mailboxes that are subscribed to on the
IMAP server. In technical terms, if this option is set, \fBmbsync\fR will use
the IMAP command LSUB instead of LIST to look for mailboxes in this Store.
This option make sense only in conjunction with \fBPatterns\fR.
(Default: \fBno\fR)
.
.SS Channels
.TP
\fBChannel\fR \fIname\fR
Define the Channel \fIname\fR, opening a section for its parameters.
.
.TP
{\fBFar\fR|\fBNear\fR} \fB:\fIstore\fB:\fR[\fImailbox\fR]
Specify the far resp. near side Store to be connected by this Channel.
If \fBPatterns\fR are specified, \fImailbox\fR is interpreted as a
prefix which is not matched against the patterns, and which is not
affected by mailbox list overrides.
Otherwise, if \fImailbox\fR is omitted, \fBINBOX\fR is assumed.
.
.TP
\fBPattern\fR[\fBs\fR] [\fB!\fR]\fIpattern\fR ...
Instead of synchronizing only one mailbox pair, synchronize all mailboxes
that match the \fIpattern\fR(s). The mailbox names are the same on the far
and near side. Patterns are IMAP4 patterns, i.e., \fB*\fR matches anything
and \fB%\fR matches anything up to the next hierarchy delimiter. Prepending
\fB!\fR to a pattern makes it an exclusion. Multiple patterns can be specified
(either by supplying multiple arguments or by using \fBPattern\fR multiple
times); later matches take precedence.
.br
Note that \fBINBOX\fR is not matched by wildcards, unless it lives under
\fBPath\fR.
.br
The mailbox list selected by \fBPatterns\fR can be overridden by a mailbox
list in a channel reference (a \fBGroup\fR specification or the command line).
.br
Example: "\fBPatterns\fR\ \fI%\ !Trash\fR"
.
.TP
\fBMaxSize\fR \fIsize\fR[\fBk\fR|\fBm\fR][\fBb\fR]
Analogous to the homonymous option in the Stores section, but applies equally
to Far and Near. Note that this actually modifies the Stores, so take care
not to provide conflicting settings if you use the Stores in multiple Channels.
.
.TP
\fBMaxMessages\fR \fIcount\fR
Sets the maximum number of messages to keep in each near side mailbox.
This is useful for mailboxes where you keep a complete archive on the server,
but want to mirror only the last messages (for instance, for mailing lists).
The messages that were the first to arrive in the mailbox (independently of
the actual date of the message) will be deleted first.
Messages that are flagged (marked as important) and (by default) unread
messages will not be automatically deleted.
If \fIcount\fR is 0, the maximum number of messages is \fBunlimited\fR
(Default: \fI0\fR).
.
.TP
\fBExpireUnread\fR \fByes\fR|\fBno\fR
Selects whether unread messages should be affected by \fBMaxMessages\fR.
Normally, unread messages are considered important and thus never expired.
This ensures that you never miss new messages even after an extended absence.
However, if your archive contains large amounts of unread messages by design,
treating them as important would practically defeat \fBMaxMessages\fR. In this
case you need to enable this option.
(Default: \fBno\fR).
.
.TP
\fBSync\fR {\fBNone\fR|[\fBPull\fR] [\fBPush\fR] [\fBNew\fR] [\fBReNew\fR] [\fBDelete\fR] [\fBFlags\fR]|\fBAll\fR}
Select the synchronization operation(s) to perform:
.br
\fBPull\fR - propagate changes from far to near side.
.br
\fBPush\fR - propagate changes from near to far side.
.br
\fBNew\fR - propagate newly appeared messages.
.br
\fBReNew\fR - upgrade placeholders to full messages. Useful only with
a configured \fBMaxSize\fR.
.br
\fBDelete\fR - propagate message deletions. This applies only to messages that
are actually gone, i.e., were expunged. The affected messages in the remote
Store are marked as deleted only, i.e., they won't be really deleted until
that Store is expunged.
.br
\fBFlags\fR - propagate flag changes. Note that Deleted/Trashed is a flag as
well; this is particularly interesting if you use \fBmutt\fR with the
maildir_trash option.
.br
\fBAll\fR (\fB--full\fR on the command line) - all of the above.
This is the global default.
.br
\fBNone\fR (\fB--noop\fR on the command line) - don't propagate anything.
Useful if you want to expunge only.
.IP
\fBPull\fR and \fBPush\fR are direction flags, while \fBNew\fR, \fBReNew\fR,
\fBDelete\fR and \fBFlags\fR are type flags. The two flag classes make up a
two-dimensional matrix (a table). Its cells are the individual actions to
perform. There are two styles of asserting the cells:
.br
In the first style, the flags select entire rows/colums in the matrix. Only
the cells which are selected both horizontally and vertically are asserted.
Specifying no flags from a class is like specifying all flags from this class.
For example, "\fBSync\fR\ \fBPull\fR\ \fBNew\fR\ \fBFlags\fR" will propagate
new messages and flag changes from the far side to the near side,
"\fBSync\fR\ \fBNew\fR\ \fBDelete\fR" will propagate message arrivals and
deletions both ways, and "\fBSync\fR\ \fBPush\fR" will propagate all changes
from the near side to the far side.
.br
In the second style, direction flags are concatenated with type flags; every
compound flag immediately asserts a cell in the matrix. In addition to at least
one compound flag, the individual flags can be used as well, but as opposed to
the first style, they immediately assert all cells in their respective
row/column. For example,
"\fBSync\fR\ \fBPullNew\fR\ \fBPullDelete\fR\ \fBPush\fR" will propagate
message arrivals and deletions from the far side to the near side and any
changes from the near side to the far side.
Note that it is not allowed to assert a cell in two ways, e.g.
"\fBSync\fR\ \fBPullNew\fR\ \fBPull\fR" and
"\fBSync\fR\ \fBPullNew\fR\ \fBDelete\fR\ \fBPush\fR" induce error messages.
.
.TP
\fBCreate\fR {\fBNone\fR|\fBFar\fR|\fBNear\fR|\fBBoth\fR}
Automatically create missing mailboxes [on the far/near side].
Otherwise print an error message and skip that mailbox pair if a mailbox
and the corresponding sync state does not exist.
(Global default: \fBNone\fR)
.
.TP
\fBRemove\fR {\fBNone\fR|\fBFar\fR|\fBNear\fR|\fBBoth\fR}
Propagate mailbox deletions [to the far/near side].
Otherwise print an error message and skip that mailbox pair if a mailbox
does not exist but the corresponding sync state does.
.br
For MailDir mailboxes it is sufficient to delete the cur/ subdirectory to
mark them as deleted. This ensures compatibility with \fBSyncState *\fR.
.br
Note that for safety, non-empty mailboxes are never deleted.
.br
(Global default: \fBNone\fR)
.
.TP
\fBExpunge\fR {\fBNone\fR|\fBFar\fR|\fBNear\fR|\fBBoth\fR}
Permanently remove all messages [on the far/near side] marked for deletion.
See \fBRECOMMENDATIONS\fR below.
(Global default: \fBNone\fR)
.
.TP
\fBCopyArrivalDate\fR {\fByes\fR|\fBno\fR}
Selects whether their arrival time should be propagated together with
the messages.
Enabling this makes sense in order to keep the time stamp based message
sorting intact.
Note that IMAP does not guarantee that the time stamp (termed \fBinternal
date\fR) is actually the arrival time, but it is usually close enough.
(Default: \fBno\fR)
.
.P
\fBSync\fR, \fBCreate\fR, \fBRemove\fR, \fBExpunge\fR,
\fBMaxMessages\fR, and \fBCopyArrivalDate\fR
can be used before any section for a global effect.
The global settings are overridden by Channel-specific options,
which in turn are overridden by command line switches.
.
.TP
\fBSyncState\fR {\fB*\fR|\fIpath\fR}
Set the location of this Channel's synchronization state files.
\fB*\fR means that the state should be saved in a file named .mbsyncstate
in the near side mailbox itself; this has the advantage that you do not need
to handle the state file separately if you delete the mailbox, but it works
only with Maildir mailboxes, obviously.
Otherwise this is interpreted as a string to prepend to the near side mailbox
name to make up a complete path.
.br
This option can be used outside any section for a global effect. In this case
the appended string is made up according to the pattern
\fB:\fIfar-store\fB:\fIfar-box\fB_:\fInear-store\fB:\fInear-box\fR
(see also \fBFieldDelimiter\fR below).
.br
(Global default: \fI~/.mbsync/\fR).
.
.SS Groups
.TP
\fBGroup\fR \fIname\fR [\fIchannel\fR[\fB:\fIbox\fR[\fB,\fR...]]] ...
Define the Group \fIname\fR, opening a section for its parameters.
Note that even though Groups have an own namespace, they will "hide" Channels
with the same name on the command line.
.br
One or more Channels can be specified on the same line.
.br
If you supply one or more \fIbox\fRes to a \fIchannel\fR, they will be used
instead of what is specified in the Channel's Patterns.
The same can be done on the command line, except that there newlines can be
used as mailbox name separators as well.
.
.TP
\fBChannel\fR[\fBs\fR] \fIchannel\fR[\fB:\fIbox\fR[\fB,\fR...]] ...
Add the specified channels to the group. This option can be specified multiple
times within a Group.
.
.SS Global Options
.TP
\fBFSync\fR \fByes\fR|\fBno\fR
.br
Selects whether \fBmbsync\fR performs forced flushing, which determines
the level of data safety after system crashes and power outages.
Disabling it is reasonably safe for file systems which are mounted with
data=ordered mode.
Enabling it is a wise choice for file systems mounted with data=writeback,
in particular modern systems like ext4, btrfs and xfs. The performance impact
on older file systems may be disproportionate.
(Default: \fByes\fR)
.
.TP
\fBFieldDelimiter\fR \fIdelim\fR
The character to use to delimit fields in the string appended to a global
\fBSyncState\fR.
\fBmbsync\fR prefers to use the colon, but this is incompatible with
DOS/Windows file systems.
This option is meaningless for \fBSyncState\fR if the latter is \fB*\fR,
obviously. However, it also determines the default of \fBInfoDelimiter\fR.
(Global default: \fI;\fR on Windows, \fI:\fR everywhere else)
.
.TP
\fBBufferLimit\fR \fIsize\fR[\fBk\fR|\fBm\fR][\fBb\fR]
The per-Channel, per-direction instantaneous memory usage above which
\fBmbsync\fR will refrain from using more memory. Note that this is no
absolute limit, as even a single message can consume more memory than
this.
(Default: \fI10M\fR)
.
.SH CONSOLE OUTPUT
If \fBmbsync\fR's output is connected to a console, it will print progress
counters by default. The output will look like this:
.P
.in +4
C: 1/2  B: 3/4  F: +13/13 *23/42 #0/0  N: +0/7 *0/0 #0/0
.in -4
.P
This represents the cumulative progress over channels, boxes, and messages
affected on the far and near side, respectively.
The message counts represent added messages, messages with updated flags,
and trashed messages, respectively.
No attempt is made to calculate the totals in advance, so they grow over
time as more information is gathered.
.
.SH RECOMMENDATIONS
Make sure your IMAP server does not auto-expunge deleted messages - it is
slow, and semantically somewhat questionable. Specifically, Gmail needs to
be configured not to do it.
.P
By default, \fBmbsync\fR will not delete any messages - deletions are
propagated by marking the messages as deleted on the remote store.
Once you have verified that your setup works, you will typically want to
set \fBExpunge\fR to \fBBoth\fR, so that deletions become effective.
.P
\fBmbsync\fR's built-in trash functionality relies on \fBmbsync\fR doing
the expunging of deleted messages. This is the case when it propagates
deletions of previously propagated messages, and the trash is on the target
store (typically your IMAP server).
.br
However, when you intend \fBmbsync\fR to trash messages which were not
propagated yet, the MUA must mark the messages as deleted without expunging
them (e.g., \fBMutt\fR's \fBmaildir_trash\fR option). Note that most
messages are propagated a long time before they are deleted, so this is a
corner case you probably do not want to optimize for. This also implies
that the \fBTrashNewOnly\fR and \fBTrashRemoteNew\fR options are typically
not very useful.
.P
If your server supports auto-trashing (as Gmail does), it is probably a
good idea to rely on that instead of \fBmbsync\fR's trash functionality.
If you do that, and intend to synchronize the trash like other mailboxes,
you should not use \fBmbsync\fR's \fBTrash\fR option at all.
.P
Use of the \fBTrash\fR option with M$ Exchange 2013 requires the use of
\fBDisableExtension MOVE\fR due to a server bug.
.P
When using the more efficient default UID mapping scheme, it is important
that the MUA renames files when moving them between Maildir folders.
Mutt always does that, while mu4e needs to be configured to do it:
.br
.in +4
(setq mu4e-change-filenames-when-moving t)
.in -4
.
.SH INHERENT PROBLEMS
Changes done after \fBmbsync\fR has retrieved the message list will not be
synchronised until the next time \fBmbsync\fR is invoked.
.P
Using \fBTrash\fR on IMAP Stores without the UIDPLUS extension (notably,
M$ Exchange up to at least 2010) bears a race condition: messages will be
lost if they are marked as deleted after the message list was retrieved but
before the mailbox is expunged.
There is no risk as long as the IMAP mailbox is accessed by only one client
(including \fBmbsync\fR) at a time.
.
.SH FILES
.TP
.B ~/.mbsyncrc
Default configuration file
.TP
.B ~/.mbsync/
Directory containing synchronization state files
.
.SH SEE ALSO
mdconvert(1), mutt(1), maildir(5)
.P
Up to date information on \fBmbsync\fR can be found at http://isync.sf.net/
.P
SASL mechanisms are listed at
http://www.iana.org/assignments/sasl-mechanisms/sasl-mechanisms.xhtml
.
.SH AUTHORS
Originally written by Michael R. Elkins,
rewritten and currently maintained by Oswald Buddenhagen,
contributions by Theodore Y. Ts'o.