if the server sends no UIDNEXT, do an initial FETCH to query the UID of
the last message.
same if the server sends no APPENDUID.
this allows us to remove the arbitrary limitation of the UID range to
INT_MAX, at the cost of additional round-trips.
multiple Channels can call driver_t::list_store() with different LIST_*
flags. assuming the flags are actually taken into consideration, using a
single boolean 'listed' flag to track whether the Store still needs to
be listed obviously wouldn't cut it - if INBOX does not live right under
Path and the Channels used entirely disjoint Patterns (say, * and
INBOX*), the second Channel in a single run (probably a Group) would
fail to match anything.
to fix this, make store_t::listed more granular. this also requires
moving its handling back into the drivers (thus reverting c66afdc0),
because the actually performed queries and their possible implicit
results are driver-specific.
note that this slightly pessimizes some cases - e.g., an IMAP Store with
Path "" will now list the entire namespace even if there is only one
Channel with Pattern "INBOX*" (because a hypothetical Pattern "*" would
also include INBOX*, and the queries are kept disjoint to avoid the need
for de-duplication). this isn't expected to be a problem, as listing
mailboxes is generally cheap.
latest since 77acc268, the code prior to these statements ensures that
the full length is available, so just use memcpy(). the code for
comparing TUIDs uses memcmp() anyway.
when syncing flags but not re-newing non-fetched messages, there is no
need to query the message size for all messages, as the old ones are
queried only for their flags.
instead of a single hard-coded branch, use a generic method to split
ranges as needed.
this is of course entirely over-engineered as of now, but subsequent
commits will make good use of it.
if AuthMechs includes more than just LOGIN and the server announces any
AUTH= mechanism, we try SASL. but that can still fail to find any
suitable authentication mechanism, and we must not error out in that
case if we are supposed to fall back to LOGIN.
specifically, if AuthMechs included more than just LOGIN (which would be
the case for '*') and the server announced any AUTH= mechanism, we'd
immediately error out upon seeing it, thus failing to actually try
LOGIN.
the number was chosen to make queries more comprehensible when the
server sends no UIDNEXT, but it appears that such insanely large UIDs
actually show up in the wild. so send 32-bit INT_MAX instead.
note that this is again making an assumption: that no server uses
unsigned ints for UIDs. but we can't sent UINT_MAX, as that would break
with servers which use signed ints. also, *we* use signed ints (which is
actually a clear violation of the spec).
it would be possible to special-case the range [1,inf] to 1:*, thus
entirely removing arbitrary limits. however, when the range doesn't
start at 1, we may actually get a single message instead of none due to
the imap uid range limits being unordered. this gets really nasty when
we need to issue multiple queries, as we may list the same message
twice.
a reliable way around this would be issuing a separate query to find the
actual value of UID '*', to make up for the server not sending UIDNEXT
in the first place. this would obviously imply an additional round-trip
per mailbox ...
it is legal for an email system to simply change the case of rfc2822
headers, and at least one imap server apparently does just that.
this would lead to us not finding our own header, which is obviously not
helpful.
REFMAIL: CA+fD2U3hJEszmvwBsXEpTsaWgJ2Dh373mCESM3M0kg3ZwAYjaw@mail.gmail.com
that pattern may very well expand to INBOXNOT, which would naturally
live under Path, so we need to look into the Path. of course, this
actually makes sense only if there *is* a Path, and complaining about
it being absent is backwards.
the idea that this is even possible was based on an incomplete reading
of the imap spec.
however, the infrastructure for supporting multi-char delimiters as such
is retained, as the Flatten option can be used with them.
recycling server connections skips everything up to setting up the
prefix (Path/NAMESPACE). "everything" should obviously include enabling
compression, as that must be done at most once per connection.
any structures may be invalid after callback invocation.
this has the side effect that the socket write callback now returns
void, like all other callbacks do.
the synchronous writing to the socket would have typically invoked the
write callback, which would flush further commands, thus recursing.
we take the easy way out and make it fully asynchronous, i.e., no data
is sent before (re-)entering the event loop.
this also has the effect that socket_write() cannot fail any more, and
any errors will be reported asynchronously. this is consistent with
socket_read(), and produces cleaner code.
this introduces a marginal performance regression: the maildir driver is
synchronous, so all messages (which fit into memory) will be read before
any data is sent. this is not considered relevant.
in the case of imap stores, the failure is bound to the server config,
not just the store config.
that means that the storage of the failure state needs to be private to
the driver, accessible only through a function.
USER (the authorization identity) specifies whom to act for.
AUTHNAME (the authentication identity) specifies who is acting (and
thus whose PASS is being used).
USER is derived from AUTHNAME if omitted, but apparently the
GSS-API module automatically adds the REALM, which is not helpful.
it appears to be common to set both USER and AUTHNAME to the same value,
so let's just do it as well.
REFMAIL: 20150407194807.GA1714@leeloo.kyriasis.com
the PassCmd will be typically non-interactive (or it will use a gui
password agent), so starting a new line just makes the progress counter
uglier. so make it configurable and default to no line break.
- the old meaning of -V[V] was moved to -D{n|N}, as these are really
debugging options.
- don't print the info messages by default; this can be re-enabled with
the -V switch, and is implied by most debug options (it was really
kind of stupid that verbose/debug operation disabled these).
- the sync algo/state debugging can be separately enabled with -Ds now.
it helps if the code actually does what the comment above it claims.
clarify it a bit, so i don't get stupid ideas again.
This reverts commit cf6a7b4d18.
propagating many messages from a fast store (typically maildir or a
local IMAP server) to a slow asynchronous store could cause gigabytes of
data being buffered. avoid this by throttling fetches if the target
context reports memory usage above a configurable limit.
REFMAIL: 9737edb14457c71af4ed156c1be0ae59@mpcjanssen.nl
don't retry dead Stores for every Channel.
this also introduces a state for transient errors (specifically, connect
failures), but this is currently unused.
when LITERAL+ is used, the server has no chance for early rejection of
messages. this means that the client can upload megabytes for nothing.
so simply don't use LITERAL+ for big messages. of course this adds
server roundtrips, but that's tough luck.
the limit could be arguably higher than 100k (or even configurable).
i set it to ~2 sec with my fairly average DSL line.
the seznam.cz IMAP server seems very eager to send UIDNEXT responses
despite not supporting UIDPLUS. this doesn't appear to be a particularly
sensible combination, but it's valid nonetheless.
however, that means that we need to save the UIDNEXT value before we
start storing messages, lest imap_find_new_msgs() will simply overlook
them. we do that outside the driver, in an already present field - this
actually makes the main path more consistent with the journal recovery
path.
analysis by Tomas Tintera <trosos@seznam.cz>.
REFMAIL: 20141220215032.GA10115@kyvadlo.trosos.seznam.cz
this re-introduces 6741bc94 (just a bit differently), thus effectively
reverting fbfcfea5. i suppose this extra CRLF is needed by a broken
CRAM-MD5 implementation of some server, which is why it was there in the
original implementation as well. however, it breaks more pedantic
non-broken servers. if somebody complains, we'll need to add a much
more sophisticated hack.
patch initially by Jack Stone <jwjstone@fastmail.fm>,
cleaned up by Jan Synacek <jsynacek@redhat.com>,
... and then almost completely rewritten by me. ^^
RequireCRAM (another fairly stupid "use if available" option) is now
deprecated. instead, the AuthMech option can be used to give a precise
list of acceptable authentication mechanisms (which is currently "a bit"
short). in particular, this allows *not* using CRAM-MD5 even if it's
available.
the combinations of the various options made quite a mess. additionally,
'RequireSSL no' is inherently insecure - "use SSL if available" is plain
stupid.
the old options are still accepted, but will elicit a warning.
it doesn't belong there - it's a property of imap_server_conf_t.
the port setup is now done while reading the config.
this makes socket.[hc] imap-agnostic.
memcmp() is unfortunately not guaranteed to read forward byte-by-byte,
which means that the clever use as a strncmp() without the pointless
strlen()s is not permitted, and can actually misbehave with
SSE-optimized string functions.
so implement proper equals() and starts_with() functions. as a bonus,
the calls are less cryptic.
