{ "smithy": "1.0", "metadata": { "suppressions": [ { "id": "HttpMethodSemantics", "namespace": "*" }, { "id": "HttpResponseCodeSemantics", "namespace": "*" }, { "id": "PaginatedTrait", "namespace": "*" }, { "id": "HttpHeaderTrait", "namespace": "*" }, { "id": "HttpUriConflict", "namespace": "*" }, { "id": "Service", "namespace": "*" } ] }, "shapes": { "com.amazonaws.ses#AccountSendingPausedException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that email sending is disabled for your entire Amazon SES account.

\n

You can enable or disable email sending for your Amazon SES account using UpdateAccountSendingEnabled.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#AddHeaderAction": { "type": "structure", "members": { "HeaderName": { "target": "com.amazonaws.ses#HeaderName", "traits": { "smithy.api#documentation": "

The name of the header to add. Must be between 1 and 50 characters, inclusive, and\n consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only.

", "smithy.api#required": {} } }, "HeaderValue": { "target": "com.amazonaws.ses#HeaderValue", "traits": { "smithy.api#documentation": "

Must be less than 2048 characters, and must not contain newline characters (\"\\r\" or\n \"\\n\").

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action adds a header to the received\n email.

\n

For information about adding a header using a receipt rule, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#Address": { "type": "string" }, "com.amazonaws.ses#AddressList": { "type": "list", "member": { "target": "com.amazonaws.ses#Address" } }, "com.amazonaws.ses#AlreadyExistsException": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#RuleOrRuleSetName", "traits": { "smithy.api#documentation": "

Indicates that a resource could not be created because the resource name already\n exists.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that a resource could not be created because of a naming conflict.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#AmazonResourceName": { "type": "string" }, "com.amazonaws.ses#ArrivalDate": { "type": "timestamp" }, "com.amazonaws.ses#BehaviorOnMXFailure": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "UseDefaultValue", "name": "UseDefaultValue" }, { "value": "RejectMessage", "name": "RejectMessage" } ] } }, "com.amazonaws.ses#Body": { "type": "structure", "members": { "Text": { "target": "com.amazonaws.ses#Content", "traits": { "smithy.api#documentation": "

The content of the message, in text format. Use this for text-based email clients, or\n clients on high-latency networks (such as mobile devices).

" } }, "Html": { "target": "com.amazonaws.ses#Content", "traits": { "smithy.api#documentation": "

The content of the message, in HTML format. Use this for email clients that can\n process HTML. You can include clickable links, formatted text, and much more in an HTML\n message.

" } } }, "traits": { "smithy.api#documentation": "

Represents the body of the message. You can specify text, HTML, or both. If you use\n both, then the message should display correctly in the widest variety of email\n clients.

" } }, "com.amazonaws.ses#BounceAction": { "type": "structure", "members": { "TopicArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the bounce action is\n taken. An example of an Amazon SNS topic ARN is\n arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about\n Amazon SNS topics, see the Amazon SNS Developer Guide.

" } }, "SmtpReplyCode": { "target": "com.amazonaws.ses#BounceSmtpReplyCode", "traits": { "smithy.api#documentation": "

The SMTP reply code, as defined by RFC 5321.

", "smithy.api#required": {} } }, "StatusCode": { "target": "com.amazonaws.ses#BounceStatusCode", "traits": { "smithy.api#documentation": "

The SMTP enhanced status code, as defined by RFC 3463.

" } }, "Message": { "target": "com.amazonaws.ses#BounceMessage", "traits": { "smithy.api#documentation": "

Human-readable text to include in the bounce message.

", "smithy.api#required": {} } }, "Sender": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address of the sender of the bounced email. This is the address from which\n the bounce message will be sent.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action rejects the received email by returning a\n bounce response to the sender and, optionally, publishes a notification to Amazon Simple Notification Service\n (Amazon SNS).

\n

For information about sending a bounce message in response to a received email, see\n the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#BounceMessage": { "type": "string" }, "com.amazonaws.ses#BounceSmtpReplyCode": { "type": "string" }, "com.amazonaws.ses#BounceStatusCode": { "type": "string" }, "com.amazonaws.ses#BounceType": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "DoesNotExist", "name": "DoesNotExist" }, { "value": "MessageTooLarge", "name": "MessageTooLarge" }, { "value": "ExceededQuota", "name": "ExceededQuota" }, { "value": "ContentRejected", "name": "ContentRejected" }, { "value": "Undefined", "name": "Undefined" }, { "value": "TemporaryFailure", "name": "TemporaryFailure" } ] } }, "com.amazonaws.ses#BouncedRecipientInfo": { "type": "structure", "members": { "Recipient": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address of the recipient of the bounced email.

", "smithy.api#required": {} } }, "RecipientArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to receive\n email for the recipient of the bounced email. For more information about sending\n authorization, see the Amazon SES Developer\n Guide.

" } }, "BounceType": { "target": "com.amazonaws.ses#BounceType", "traits": { "smithy.api#documentation": "

The reason for the bounce. You must provide either this parameter or\n RecipientDsnFields.

" } }, "RecipientDsnFields": { "target": "com.amazonaws.ses#RecipientDsnFields", "traits": { "smithy.api#documentation": "

Recipient-related DSN fields, most of which would normally be filled in automatically\n when provided with a BounceType. You must provide either this parameter or\n BounceType.

" } } }, "traits": { "smithy.api#documentation": "

Recipient-related information to include in the Delivery Status Notification (DSN)\n when an email that Amazon SES receives on your behalf bounces.

\n

For information about receiving email through Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#BouncedRecipientInfoList": { "type": "list", "member": { "target": "com.amazonaws.ses#BouncedRecipientInfo" } }, "com.amazonaws.ses#BulkEmailDestination": { "type": "structure", "members": { "Destination": { "target": "com.amazonaws.ses#Destination", "traits": { "smithy.api#required": {} } }, "ReplacementTags": { "target": "com.amazonaws.ses#MessageTagList", "traits": { "smithy.api#documentation": "

A list of tags, in the form of name/value pairs, to apply to an email that you send\n using SendBulkTemplatedEmail. Tags correspond to characteristics of the\n email that you define, so that you can publish email sending events.

" } }, "ReplacementTemplateData": { "target": "com.amazonaws.ses#TemplateData", "traits": { "smithy.api#documentation": "

A list of replacement values to apply to the template. This parameter is a JSON\n object, typically consisting of key-value pairs in which the keys correspond to\n replacement tags in the email template.

" } } }, "traits": { "smithy.api#documentation": "

An array that contains one or more Destinations, as well as the tags and replacement\n data associated with each of those Destinations.

" } }, "com.amazonaws.ses#BulkEmailDestinationList": { "type": "list", "member": { "target": "com.amazonaws.ses#BulkEmailDestination" } }, "com.amazonaws.ses#BulkEmailDestinationStatus": { "type": "structure", "members": { "Status": { "target": "com.amazonaws.ses#BulkEmailStatus", "traits": { "smithy.api#documentation": "

The status of a message sent using the SendBulkTemplatedEmail\n operation.

\n

Possible values for this parameter include:

\n " } }, "Error": { "target": "com.amazonaws.ses#Error", "traits": { "smithy.api#documentation": "

A description of an error that prevented a message being sent using the\n SendBulkTemplatedEmail operation.

" } }, "MessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The unique message identifier returned from the SendBulkTemplatedEmail\n operation.

" } } }, "traits": { "smithy.api#documentation": "

An object that contains the response from the SendBulkTemplatedEmail\n operation.

" } }, "com.amazonaws.ses#BulkEmailDestinationStatusList": { "type": "list", "member": { "target": "com.amazonaws.ses#BulkEmailDestinationStatus" } }, "com.amazonaws.ses#BulkEmailStatus": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Success", "name": "Success" }, { "value": "MessageRejected", "name": "MessageRejected" }, { "value": "MailFromDomainNotVerified", "name": "MailFromDomainNotVerified" }, { "value": "ConfigurationSetDoesNotExist", "name": "ConfigurationSetDoesNotExist" }, { "value": "TemplateDoesNotExist", "name": "TemplateDoesNotExist" }, { "value": "AccountSuspended", "name": "AccountSuspended" }, { "value": "AccountThrottled", "name": "AccountThrottled" }, { "value": "AccountDailyQuotaExceeded", "name": "AccountDailyQuotaExceeded" }, { "value": "InvalidSendingPoolName", "name": "InvalidSendingPoolName" }, { "value": "AccountSendingPaused", "name": "AccountSendingPaused" }, { "value": "ConfigurationSetSendingPaused", "name": "ConfigurationSetSendingPaused" }, { "value": "InvalidParameterValue", "name": "InvalidParameterValue" }, { "value": "TransientFailure", "name": "TransientFailure" }, { "value": "Failed", "name": "Failed" } ] } }, "com.amazonaws.ses#CannotDeleteException": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#RuleOrRuleSetName", "traits": { "smithy.api#documentation": "

Indicates that a resource could not be deleted because no resource with the specified\n name exists.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the delete operation could not be completed.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#Charset": { "type": "string" }, "com.amazonaws.ses#Cidr": { "type": "string" }, "com.amazonaws.ses#CloneReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#CloneReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#CloneReceiptRuleSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#AlreadyExistsException" }, { "target": "com.amazonaws.ses#LimitExceededException" }, { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Creates a receipt rule set by cloning an existing one. All receipt rules and\n configurations are copied to the new receipt rule set and are completely independent of\n the source rule set.

\n

For information about setting up rule sets, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CloneReceiptRuleSetRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the rule set to create. The name must:

\n ", "smithy.api#required": {} } }, "OriginalRuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the rule set to clone.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create a receipt rule set by cloning an existing one. You use\n receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#CloneReceiptRuleSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CloudWatchDestination": { "type": "structure", "members": { "DimensionConfigurations": { "target": "com.amazonaws.ses#CloudWatchDimensionConfigurations", "traits": { "smithy.api#documentation": "

A list of dimensions upon which to categorize your emails when you publish email\n sending events to Amazon CloudWatch.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Contains information associated with an Amazon CloudWatch event destination to which email\n sending events are published.

\n

Event destinations, such as Amazon CloudWatch, are associated with configuration sets, which\n enable you to publish email sending events. For information about using configuration\n sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#CloudWatchDimensionConfiguration": { "type": "structure", "members": { "DimensionName": { "target": "com.amazonaws.ses#DimensionName", "traits": { "smithy.api#documentation": "

The name of an Amazon CloudWatch dimension associated with an email sending metric. The name\n must:

\n ", "smithy.api#required": {} } }, "DimensionValueSource": { "target": "com.amazonaws.ses#DimensionValueSource", "traits": { "smithy.api#documentation": "

The place where Amazon SES finds the value of a dimension to publish to Amazon CloudWatch. If you\n want Amazon SES to use the message tags that you specify using an\n X-SES-MESSAGE-TAGS header or a parameter to the\n SendEmail/SendRawEmail API, choose\n messageTag. If you want Amazon SES to use your own email headers, choose\n emailHeader.

", "smithy.api#required": {} } }, "DefaultDimensionValue": { "target": "com.amazonaws.ses#DefaultDimensionValue", "traits": { "smithy.api#documentation": "

The default value of the dimension that is published to Amazon CloudWatch if you do not provide\n the value of the dimension when you send an email. The default value must:

\n ", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Contains the dimension configuration to use when you publish email sending events to\n Amazon CloudWatch.

\n

For information about publishing email sending events to Amazon CloudWatch, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#CloudWatchDimensionConfigurations": { "type": "list", "member": { "target": "com.amazonaws.ses#CloudWatchDimensionConfiguration" } }, "com.amazonaws.ses#ConfigurationSet": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set. The name must meet the following\n requirements:

\n ", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

The name of the configuration set.

\n

Configuration sets let you create groups of rules that you can apply to the emails you\n send using Amazon SES. For more information about using configuration sets, see Using Amazon SES Configuration Sets in the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#ConfigurationSetAlreadyExistsException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the configuration set could not be created because of a naming\n conflict.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#ConfigurationSetAttribute": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "eventDestinations", "name": "EVENT_DESTINATIONS" }, { "value": "trackingOptions", "name": "TRACKING_OPTIONS" }, { "value": "deliveryOptions", "name": "DELIVERY_OPTIONS" }, { "value": "reputationOptions", "name": "REPUTATION_OPTIONS" } ] } }, "com.amazonaws.ses#ConfigurationSetAttributeList": { "type": "list", "member": { "target": "com.amazonaws.ses#ConfigurationSetAttribute" } }, "com.amazonaws.ses#ConfigurationSetDoesNotExistException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#ConfigurationSetName": { "type": "string" }, "com.amazonaws.ses#ConfigurationSetSendingPausedException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set for which email sending is disabled.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that email sending is disabled for the configuration set.

\n

You can enable or disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#ConfigurationSets": { "type": "list", "member": { "target": "com.amazonaws.ses#ConfigurationSet" } }, "com.amazonaws.ses#Content": { "type": "structure", "members": { "Data": { "target": "com.amazonaws.ses#MessageData", "traits": { "smithy.api#documentation": "

The textual data of the content.

", "smithy.api#required": {} } }, "Charset": { "target": "com.amazonaws.ses#Charset", "traits": { "smithy.api#documentation": "

The character set of the content.

" } } }, "traits": { "smithy.api#documentation": "

Represents textual data, plus an optional character set specification.

\n

By default, the text must be 7-bit ASCII, due to the constraints of the SMTP protocol.\n If the text must contain any other characters, then you must also specify a character\n set. Examples include UTF-8, ISO-8859-1, and Shift_JIS.

" } }, "com.amazonaws.ses#Counter": { "type": "long" }, "com.amazonaws.ses#CreateConfigurationSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateConfigurationSetRequest" }, "output": { "target": "com.amazonaws.ses#CreateConfigurationSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetAlreadyExistsException" }, { "target": "com.amazonaws.ses#InvalidConfigurationSetException" }, { "target": "com.amazonaws.ses#LimitExceededException" } ], "traits": { "smithy.api#documentation": "

Creates a configuration set.

\n

Configuration sets enable you to publish email sending events. For information about\n using configuration sets, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateConfigurationSetEventDestination": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateConfigurationSetEventDestinationRequest" }, "output": { "target": "com.amazonaws.ses#CreateConfigurationSetEventDestinationResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#EventDestinationAlreadyExistsException" }, { "target": "com.amazonaws.ses#InvalidCloudWatchDestinationException" }, { "target": "com.amazonaws.ses#InvalidFirehoseDestinationException" }, { "target": "com.amazonaws.ses#InvalidSNSDestinationException" }, { "target": "com.amazonaws.ses#LimitExceededException" } ], "traits": { "smithy.api#documentation": "

Creates a configuration set event destination.

\n \n

When you create or update an event destination, you must provide one, and only\n one, destination. The destination can be CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS).

\n
\n

An event destination is the AWS service to which Amazon SES publishes the email sending\n events associated with a configuration set. For information about using configuration\n sets, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateConfigurationSetEventDestinationRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set that the event destination should be associated\n with.

", "smithy.api#required": {} } }, "EventDestination": { "target": "com.amazonaws.ses#EventDestination", "traits": { "smithy.api#documentation": "

An object that describes the AWS service that email sending event information will\n be published to.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create a configuration set event destination. A configuration\n set event destination, which can be either Amazon CloudWatch or Amazon Kinesis Firehose, describes an AWS service\n in which Amazon SES publishes the email sending events associated with a configuration set.\n For information about using configuration sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#CreateConfigurationSetEventDestinationResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CreateConfigurationSetRequest": { "type": "structure", "members": { "ConfigurationSet": { "target": "com.amazonaws.ses#ConfigurationSet", "traits": { "smithy.api#documentation": "

A data structure that contains the name of the configuration set.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create a configuration set. Configuration sets enable you to\n publish email sending events. For information about using configuration sets, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#CreateConfigurationSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CreateConfigurationSetTrackingOptions": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateConfigurationSetTrackingOptionsRequest" }, "output": { "target": "com.amazonaws.ses#CreateConfigurationSetTrackingOptionsResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#InvalidTrackingOptionsException" }, { "target": "com.amazonaws.ses#TrackingOptionsAlreadyExistsException" } ], "traits": { "smithy.api#documentation": "

Creates an association between a configuration set and a custom domain for open and\n click event tracking.

\n

By default, images and links used for tracking open and click events are hosted on\n domains operated by Amazon SES. You can configure a subdomain of your own to handle these\n events. For information about using custom domains, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#CreateConfigurationSetTrackingOptionsRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set that the tracking options should be associated\n with.

", "smithy.api#required": {} } }, "TrackingOptions": { "target": "com.amazonaws.ses#TrackingOptions", "traits": { "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create an open and click tracking option object in a\n configuration set.

" } }, "com.amazonaws.ses#CreateConfigurationSetTrackingOptionsResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CreateCustomVerificationEmailTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateCustomVerificationEmailTemplateRequest" }, "errors": [ { "target": "com.amazonaws.ses#CustomVerificationEmailInvalidContentException" }, { "target": "com.amazonaws.ses#CustomVerificationEmailTemplateAlreadyExistsException" }, { "target": "com.amazonaws.ses#FromEmailAddressNotVerifiedException" }, { "target": "com.amazonaws.ses#LimitExceededException" } ], "traits": { "smithy.api#documentation": "

Creates a new custom verification email template.

\n

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateCustomVerificationEmailTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template.

", "smithy.api#required": {} } }, "FromEmailAddress": { "target": "com.amazonaws.ses#FromAddress", "traits": { "smithy.api#documentation": "

The email address that the custom verification email is sent from.

", "smithy.api#required": {} } }, "TemplateSubject": { "target": "com.amazonaws.ses#Subject", "traits": { "smithy.api#documentation": "

The subject line of the custom verification email.

", "smithy.api#required": {} } }, "TemplateContent": { "target": "com.amazonaws.ses#TemplateContent", "traits": { "smithy.api#documentation": "

The content of the custom verification email. The total size of the email must be less\n than 10 MB. The message body may contain HTML, with some limitations. For more\n information, see Custom Verification Email Frequently Asked Questions in the Amazon SES\n Developer Guide.

", "smithy.api#required": {} } }, "SuccessRedirectionURL": { "target": "com.amazonaws.ses#SuccessRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is successfully verified.

", "smithy.api#required": {} } }, "FailureRedirectionURL": { "target": "com.amazonaws.ses#FailureRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is not successfully verified.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create a custom verification email template.

" } }, "com.amazonaws.ses#CreateReceiptFilter": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateReceiptFilterRequest" }, "output": { "target": "com.amazonaws.ses#CreateReceiptFilterResponse" }, "errors": [ { "target": "com.amazonaws.ses#AlreadyExistsException" }, { "target": "com.amazonaws.ses#LimitExceededException" } ], "traits": { "smithy.api#documentation": "

Creates a new IP address filter.

\n

For information about setting up IP address filters, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateReceiptFilterRequest": { "type": "structure", "members": { "Filter": { "target": "com.amazonaws.ses#ReceiptFilter", "traits": { "smithy.api#documentation": "

A data structure that describes the IP address filter to create, which consists of a\n name, an IP address range, and whether to allow or block mail from it.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create a new IP address filter. You use IP address filters\n when you receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#CreateReceiptFilterResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CreateReceiptRule": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateReceiptRuleRequest" }, "output": { "target": "com.amazonaws.ses#CreateReceiptRuleResponse" }, "errors": [ { "target": "com.amazonaws.ses#AlreadyExistsException" }, { "target": "com.amazonaws.ses#InvalidLambdaFunctionException" }, { "target": "com.amazonaws.ses#InvalidS3ConfigurationException" }, { "target": "com.amazonaws.ses#InvalidSnsTopicException" }, { "target": "com.amazonaws.ses#LimitExceededException" }, { "target": "com.amazonaws.ses#RuleDoesNotExistException" }, { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Creates a receipt rule.

\n

For information about setting up receipt rules, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateReceiptRuleRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the rule set that the receipt rule will be added to.

", "smithy.api#required": {} } }, "After": { "target": "com.amazonaws.ses#ReceiptRuleName", "traits": { "smithy.api#documentation": "

The name of an existing rule after which the new rule will be placed. If this\n parameter is null, the new rule will be inserted at the beginning of the rule\n list.

" } }, "Rule": { "target": "com.amazonaws.ses#ReceiptRule", "traits": { "smithy.api#documentation": "

A data structure that contains the specified rule's name, actions, recipients,\n domains, enabled status, scan status, and TLS policy.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create a receipt rule. You use receipt rules to receive email\n with Amazon SES. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#CreateReceiptRuleResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CreateReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#CreateReceiptRuleSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#AlreadyExistsException" }, { "target": "com.amazonaws.ses#LimitExceededException" } ], "traits": { "smithy.api#documentation": "

Creates an empty receipt rule set.

\n

For information about setting up receipt rule sets, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateReceiptRuleSetRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the rule set to create. The name must:

\n ", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create an empty receipt rule set. You use receipt rule sets to\n receive email with Amazon SES. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#CreateReceiptRuleSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#CreateTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#CreateTemplateRequest" }, "output": { "target": "com.amazonaws.ses#CreateTemplateResponse" }, "errors": [ { "target": "com.amazonaws.ses#AlreadyExistsException" }, { "target": "com.amazonaws.ses#InvalidTemplateException" }, { "target": "com.amazonaws.ses#LimitExceededException" } ], "traits": { "smithy.api#documentation": "

Creates an email template. Email templates enable you to send personalized email to\n one or more destinations in a single API operation. For more information, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#CreateTemplateRequest": { "type": "structure", "members": { "Template": { "target": "com.amazonaws.ses#Template", "traits": { "smithy.api#documentation": "

The content of the email, composed of a subject line, an HTML part, and a text-only\n part.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to create an email template. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#CreateTemplateResponse": { "type": "structure", "members": {} }, "com.amazonaws.ses#CustomMailFromStatus": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Pending", "name": "Pending" }, { "value": "Success", "name": "Success" }, { "value": "Failed", "name": "Failed" }, { "value": "TemporaryFailure", "name": "TemporaryFailure" } ] } }, "com.amazonaws.ses#CustomRedirectDomain": { "type": "string" }, "com.amazonaws.ses#CustomVerificationEmailInvalidContentException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that custom verification email template provided content is invalid.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#CustomVerificationEmailTemplate": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template.

" } }, "FromEmailAddress": { "target": "com.amazonaws.ses#FromAddress", "traits": { "smithy.api#documentation": "

The email address that the custom verification email is sent from.

" } }, "TemplateSubject": { "target": "com.amazonaws.ses#Subject", "traits": { "smithy.api#documentation": "

The subject line of the custom verification email.

" } }, "SuccessRedirectionURL": { "target": "com.amazonaws.ses#SuccessRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is successfully verified.

" } }, "FailureRedirectionURL": { "target": "com.amazonaws.ses#FailureRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is not successfully verified.

" } } }, "traits": { "smithy.api#documentation": "

Contains information about a custom verification email template.

" } }, "com.amazonaws.ses#CustomVerificationEmailTemplateAlreadyExistsException": { "type": "structure", "members": { "CustomVerificationEmailTemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

Indicates that the provided custom verification email template with the specified\n template name already exists.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that a custom verification email template with the name you specified\n already exists.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#CustomVerificationEmailTemplateDoesNotExistException": { "type": "structure", "members": { "CustomVerificationEmailTemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

Indicates that the provided custom verification email template does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that a custom verification email template with the name you specified does\n not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#CustomVerificationEmailTemplates": { "type": "list", "member": { "target": "com.amazonaws.ses#CustomVerificationEmailTemplate" } }, "com.amazonaws.ses#DefaultDimensionValue": { "type": "string" }, "com.amazonaws.ses#DeleteConfigurationSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteConfigurationSetRequest" }, "output": { "target": "com.amazonaws.ses#DeleteConfigurationSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Deletes a configuration set. Configuration sets enable you to publish email sending\n events. For information about using configuration sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteConfigurationSetEventDestination": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteConfigurationSetEventDestinationRequest" }, "output": { "target": "com.amazonaws.ses#DeleteConfigurationSetEventDestinationResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#EventDestinationDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Deletes a configuration set event destination. Configuration set event destinations\n are associated with configuration sets, which enable you to publish email sending\n events. For information about using configuration sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteConfigurationSetEventDestinationRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set from which to delete the event destination.

", "smithy.api#required": {} } }, "EventDestinationName": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

The name of the event destination to delete.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete a configuration set event destination. Configuration\n set event destinations are associated with configuration sets, which enable you to\n publish email sending events. For information about using configuration sets, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteConfigurationSetEventDestinationResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteConfigurationSetRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set to delete.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete a configuration set. Configuration sets enable you to\n publish email sending events. For information about using configuration sets, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteConfigurationSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteConfigurationSetTrackingOptions": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteConfigurationSetTrackingOptionsRequest" }, "output": { "target": "com.amazonaws.ses#DeleteConfigurationSetTrackingOptionsResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#TrackingOptionsDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Deletes an association between a configuration set and a custom domain for open and\n click event tracking.

\n

By default, images and links used for tracking open and click events are hosted on\n domains operated by Amazon SES. You can configure a subdomain of your own to handle these\n events. For information about using custom domains, see the Amazon SES Developer Guide.

\n \n

Deleting this kind of association will result in emails sent using the specified\n configuration set to capture open and click events using the standard,\n Amazon SES-operated domains.

\n
" } }, "com.amazonaws.ses#DeleteConfigurationSetTrackingOptionsRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set from which you want to delete the tracking\n options.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete open and click tracking options in a configuration set.\n

" } }, "com.amazonaws.ses#DeleteConfigurationSetTrackingOptionsResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteCustomVerificationEmailTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteCustomVerificationEmailTemplateRequest" }, "traits": { "smithy.api#documentation": "

Deletes an existing custom verification email template.

\n

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteCustomVerificationEmailTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template that you want to delete.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete an existing custom verification email template.

" } }, "com.amazonaws.ses#DeleteIdentity": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteIdentityRequest" }, "output": { "target": "com.amazonaws.ses#DeleteIdentityResponse" }, "traits": { "smithy.api#documentation": "

Deletes the specified identity (an email address or a domain) from the list of\n verified identities.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteIdentityPolicy": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteIdentityPolicyRequest" }, "output": { "target": "com.amazonaws.ses#DeleteIdentityPolicyResponse" }, "traits": { "smithy.api#documentation": "

Deletes the specified sending authorization policy for the given identity (an email\n address or a domain). This API returns successfully even if a policy with the specified\n name does not exist.

\n \n

This API is for the identity owner only. If you have not verified the identity,\n this API will return an error.

\n
\n

Sending authorization is a feature that enables an identity owner to authorize other\n senders to use its identities. For information about using sending authorization, see\n the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteIdentityPolicyRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity that is associated with the policy that you want to delete. You can\n specify the identity by using its name or by using its Amazon Resource Name (ARN).\n Examples: user@example.com, example.com,\n arn:aws:ses:us-east-1:123456789012:identity/example.com.

\n

To successfully call this API, you must own the identity.

", "smithy.api#required": {} } }, "PolicyName": { "target": "com.amazonaws.ses#PolicyName", "traits": { "smithy.api#documentation": "

The name of the policy to be deleted.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete a sending authorization policy for an identity. Sending\n authorization is an Amazon SES feature that enables you to authorize other senders to use\n your identities. For information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteIdentityPolicyResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteIdentityRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity to be removed from the list of identities for the AWS Account.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete one of your Amazon SES identities (an email address or\n domain).

" } }, "com.amazonaws.ses#DeleteIdentityResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteReceiptFilter": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteReceiptFilterRequest" }, "output": { "target": "com.amazonaws.ses#DeleteReceiptFilterResponse" }, "traits": { "smithy.api#documentation": "

Deletes the specified IP address filter.

\n

For information about managing IP address filters, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteReceiptFilterRequest": { "type": "structure", "members": { "FilterName": { "target": "com.amazonaws.ses#ReceiptFilterName", "traits": { "smithy.api#documentation": "

The name of the IP address filter to delete.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete an IP address filter. You use IP address filters when\n you receive email with Amazon SES. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteReceiptFilterResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteReceiptRule": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteReceiptRuleRequest" }, "output": { "target": "com.amazonaws.ses#DeleteReceiptRuleResponse" }, "errors": [ { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Deletes the specified receipt rule.

\n

For information about managing receipt rules, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteReceiptRuleRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set that contains the receipt rule to delete.

", "smithy.api#required": {} } }, "RuleName": { "target": "com.amazonaws.ses#ReceiptRuleName", "traits": { "smithy.api#documentation": "

The name of the receipt rule to delete.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete a receipt rule. You use receipt rules to receive email\n with Amazon SES. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteReceiptRuleResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#DeleteReceiptRuleSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#CannotDeleteException" } ], "traits": { "smithy.api#documentation": "

Deletes the specified receipt rule set and all of the receipt rules it\n contains.

\n \n

The currently active rule set cannot be deleted.

\n
\n

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteReceiptRuleSetRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set to delete.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete a receipt rule set and all of the receipt rules it\n contains. You use receipt rule sets to receive email with Amazon SES. For more information,\n see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteReceiptRuleSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#DeleteTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteTemplateRequest" }, "output": { "target": "com.amazonaws.ses#DeleteTemplateResponse" }, "traits": { "smithy.api#documentation": "

Deletes an email template.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DeleteTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the template to be deleted.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete an email template. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DeleteTemplateResponse": { "type": "structure", "members": {} }, "com.amazonaws.ses#DeleteVerifiedEmailAddress": { "type": "operation", "input": { "target": "com.amazonaws.ses#DeleteVerifiedEmailAddressRequest" }, "traits": { "smithy.api#documentation": "

Deprecated. Use the DeleteIdentity operation to delete email addresses\n and domains.

" } }, "com.amazonaws.ses#DeleteVerifiedEmailAddressRequest": { "type": "structure", "members": { "EmailAddress": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

An email address to be removed from the list of verified addresses.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to delete an email address from the list of email addresses you\n have attempted to verify under your AWS account.

" } }, "com.amazonaws.ses#DeliveryOptions": { "type": "structure", "members": { "TlsPolicy": { "target": "com.amazonaws.ses#TlsPolicy", "traits": { "smithy.api#documentation": "

Specifies whether messages that use the configuration set are required to use\n Transport Layer Security (TLS). If the value is Require, messages are only\n delivered if a TLS connection can be established. If the value is Optional,\n messages can be delivered in plain text if a TLS connection can't be established.

" } } }, "traits": { "smithy.api#documentation": "

Specifies whether messages that use the configuration set are required to use\n Transport Layer Security (TLS).

" } }, "com.amazonaws.ses#DescribeActiveReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#DescribeActiveReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#DescribeActiveReceiptRuleSetResponse" }, "traits": { "smithy.api#documentation": "

Returns the metadata and receipt rules for the receipt rule set that is currently\n active.

\n

For information about setting up receipt rule sets, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DescribeActiveReceiptRuleSetRequest": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

Represents a request to return the metadata and receipt rules for the receipt rule set\n that is currently active. You use receipt rule sets to receive email with Amazon SES. For\n more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DescribeActiveReceiptRuleSetResponse": { "type": "structure", "members": { "Metadata": { "target": "com.amazonaws.ses#ReceiptRuleSetMetadata", "traits": { "smithy.api#documentation": "

The metadata for the currently active receipt rule set. The metadata consists of the\n rule set name and a timestamp of when the rule set was created.

" } }, "Rules": { "target": "com.amazonaws.ses#ReceiptRulesList", "traits": { "smithy.api#documentation": "

The receipt rules that belong to the active rule set.

" } } }, "traits": { "smithy.api#documentation": "

Represents the metadata and receipt rules for the receipt rule set that is currently\n active.

" } }, "com.amazonaws.ses#DescribeConfigurationSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#DescribeConfigurationSetRequest" }, "output": { "target": "com.amazonaws.ses#DescribeConfigurationSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Returns the details of the specified configuration set. For information about using\n configuration sets, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DescribeConfigurationSetRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set to describe.

", "smithy.api#required": {} } }, "ConfigurationSetAttributeNames": { "target": "com.amazonaws.ses#ConfigurationSetAttributeList", "traits": { "smithy.api#documentation": "

A list of configuration set attributes to return.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the details of a configuration set. Configuration sets\n enable you to publish email sending events. For information about using configuration\n sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DescribeConfigurationSetResponse": { "type": "structure", "members": { "ConfigurationSet": { "target": "com.amazonaws.ses#ConfigurationSet", "traits": { "smithy.api#documentation": "

The configuration set object associated with the specified configuration set.

" } }, "EventDestinations": { "target": "com.amazonaws.ses#EventDestinations", "traits": { "smithy.api#documentation": "

A list of event destinations associated with the configuration set.

" } }, "TrackingOptions": { "target": "com.amazonaws.ses#TrackingOptions", "traits": { "smithy.api#documentation": "

The name of the custom open and click tracking domain associated with the\n configuration set.

" } }, "DeliveryOptions": { "target": "com.amazonaws.ses#DeliveryOptions" }, "ReputationOptions": { "target": "com.amazonaws.ses#ReputationOptions", "traits": { "smithy.api#documentation": "

An object that represents the reputation settings for the configuration set.

" } } }, "traits": { "smithy.api#documentation": "

Represents the details of a configuration set. Configuration sets enable you to\n publish email sending events. For information about using configuration sets, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DescribeReceiptRule": { "type": "operation", "input": { "target": "com.amazonaws.ses#DescribeReceiptRuleRequest" }, "output": { "target": "com.amazonaws.ses#DescribeReceiptRuleResponse" }, "errors": [ { "target": "com.amazonaws.ses#RuleDoesNotExistException" }, { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Returns the details of the specified receipt rule.

\n

For information about setting up receipt rules, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DescribeReceiptRuleRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set that the receipt rule belongs to.

", "smithy.api#required": {} } }, "RuleName": { "target": "com.amazonaws.ses#ReceiptRuleName", "traits": { "smithy.api#documentation": "

The name of the receipt rule.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the details of a receipt rule. You use receipt rules to\n receive email with Amazon SES. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#DescribeReceiptRuleResponse": { "type": "structure", "members": { "Rule": { "target": "com.amazonaws.ses#ReceiptRule", "traits": { "smithy.api#documentation": "

A data structure that contains the specified receipt rule's name, actions, recipients,\n domains, enabled status, scan status, and Transport Layer Security (TLS) policy.

" } } }, "traits": { "smithy.api#documentation": "

Represents the details of a receipt rule.

" } }, "com.amazonaws.ses#DescribeReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#DescribeReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#DescribeReceiptRuleSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Returns the details of the specified receipt rule set.

\n

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#DescribeReceiptRuleSetRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set to describe.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the details of a receipt rule set. You use receipt rule\n sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#DescribeReceiptRuleSetResponse": { "type": "structure", "members": { "Metadata": { "target": "com.amazonaws.ses#ReceiptRuleSetMetadata", "traits": { "smithy.api#documentation": "

The metadata for the receipt rule set, which consists of the rule set name and the\n timestamp of when the rule set was created.

" } }, "Rules": { "target": "com.amazonaws.ses#ReceiptRulesList", "traits": { "smithy.api#documentation": "

A list of the receipt rules that belong to the specified receipt rule set.

" } } }, "traits": { "smithy.api#documentation": "

Represents the details of the specified receipt rule set.

" } }, "com.amazonaws.ses#Destination": { "type": "structure", "members": { "ToAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

The recipients to place on the To: line of the message.

" } }, "CcAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

The recipients to place on the CC: line of the message.

" } }, "BccAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

The recipients to place on the BCC: line of the message.

" } } }, "traits": { "smithy.api#documentation": "

Represents the destination of the message, consisting of To:, CC:, and BCC:\n fields.

\n \n

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the\n local part of a destination email address (the part of the\n email address that precedes the @ sign) may only contain 7-bit ASCII\n characters. If the domain part of an address (the\n part after the @ sign) contains non-ASCII characters, they must be encoded using\n Punycode, as described in RFC3492.

\n
" } }, "com.amazonaws.ses#DiagnosticCode": { "type": "string" }, "com.amazonaws.ses#DimensionName": { "type": "string" }, "com.amazonaws.ses#DimensionValueSource": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "messageTag", "name": "MESSAGE_TAG" }, { "value": "emailHeader", "name": "EMAIL_HEADER" }, { "value": "linkTag", "name": "LINK_TAG" } ] } }, "com.amazonaws.ses#DkimAttributes": { "type": "map", "key": { "target": "com.amazonaws.ses#Identity" }, "value": { "target": "com.amazonaws.ses#IdentityDkimAttributes" } }, "com.amazonaws.ses#Domain": { "type": "string" }, "com.amazonaws.ses#DsnAction": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "failed", "name": "FAILED" }, { "value": "delayed", "name": "DELAYED" }, { "value": "delivered", "name": "DELIVERED" }, { "value": "relayed", "name": "RELAYED" }, { "value": "expanded", "name": "EXPANDED" } ] } }, "com.amazonaws.ses#DsnStatus": { "type": "string" }, "com.amazonaws.ses#Enabled": { "type": "boolean" }, "com.amazonaws.ses#Error": { "type": "string" }, "com.amazonaws.ses#ErrorMessage": { "type": "string" }, "com.amazonaws.ses#EventDestination": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

The name of the event destination. The name must:

\n ", "smithy.api#required": {} } }, "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Sets whether Amazon SES publishes events to this destination when you send an email with\n the associated configuration set. Set to true to enable publishing to this\n destination; set to false to prevent publishing to this destination. The\n default value is false.

" } }, "MatchingEventTypes": { "target": "com.amazonaws.ses#EventTypes", "traits": { "smithy.api#documentation": "

The type of email sending events to publish to the event destination.

", "smithy.api#required": {} } }, "KinesisFirehoseDestination": { "target": "com.amazonaws.ses#KinesisFirehoseDestination", "traits": { "smithy.api#documentation": "

An object that contains the delivery stream ARN and the IAM role ARN associated with\n an Amazon Kinesis Firehose event destination.

" } }, "CloudWatchDestination": { "target": "com.amazonaws.ses#CloudWatchDestination", "traits": { "smithy.api#documentation": "

An object that contains the names, default values, and sources of the dimensions\n associated with an Amazon CloudWatch event destination.

" } }, "SNSDestination": { "target": "com.amazonaws.ses#SNSDestination", "traits": { "smithy.api#documentation": "

An object that contains the topic ARN associated with an Amazon Simple Notification Service (Amazon SNS) event\n destination.

" } } }, "traits": { "smithy.api#documentation": "

Contains information about the event destination that the specified email sending\n events will be published to.

\n \n

When you create or update an event destination, you must provide one, and only\n one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose or Amazon Simple Notification Service (Amazon SNS).

\n
\n

Event destinations are associated with configuration sets, which enable you to publish\n email sending events to Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about\n using configuration sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#EventDestinationAlreadyExistsException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "EventDestinationName": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

Indicates that the event destination does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the event destination could not be created because of a naming\n conflict.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#EventDestinationDoesNotExistException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "EventDestinationName": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

Indicates that the event destination does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the event destination does not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#EventDestinationName": { "type": "string" }, "com.amazonaws.ses#EventDestinations": { "type": "list", "member": { "target": "com.amazonaws.ses#EventDestination" } }, "com.amazonaws.ses#EventType": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "send", "name": "SEND" }, { "value": "reject", "name": "REJECT" }, { "value": "bounce", "name": "BOUNCE" }, { "value": "complaint", "name": "COMPLAINT" }, { "value": "delivery", "name": "DELIVERY" }, { "value": "open", "name": "OPEN" }, { "value": "click", "name": "CLICK" }, { "value": "renderingFailure", "name": "RENDERING_FAILURE" } ] } }, "com.amazonaws.ses#EventTypes": { "type": "list", "member": { "target": "com.amazonaws.ses#EventType" } }, "com.amazonaws.ses#Explanation": { "type": "string" }, "com.amazonaws.ses#ExtensionField": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#ExtensionFieldName", "traits": { "smithy.api#documentation": "

The name of the header to add. Must be between 1 and 50 characters, inclusive, and\n consist of alphanumeric (a-z, A-Z, 0-9) characters and dashes only.

", "smithy.api#required": {} } }, "Value": { "target": "com.amazonaws.ses#ExtensionFieldValue", "traits": { "smithy.api#documentation": "

The value of the header to add. Must be less than 2048 characters, and must not\n contain newline characters (\"\\r\" or \"\\n\").

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Additional X-headers to include in the Delivery Status Notification (DSN) when an\n email that Amazon SES receives on your behalf bounces.

\n

For information about receiving email through Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#ExtensionFieldList": { "type": "list", "member": { "target": "com.amazonaws.ses#ExtensionField" } }, "com.amazonaws.ses#ExtensionFieldName": { "type": "string" }, "com.amazonaws.ses#ExtensionFieldValue": { "type": "string" }, "com.amazonaws.ses#FailureRedirectionURL": { "type": "string" }, "com.amazonaws.ses#FromAddress": { "type": "string" }, "com.amazonaws.ses#FromEmailAddressNotVerifiedException": { "type": "structure", "members": { "FromEmailAddress": { "target": "com.amazonaws.ses#FromAddress", "traits": { "smithy.api#documentation": "

Indicates that the from email address associated with the custom verification email\n template is not verified.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the sender address specified for a custom verification email is not\n verified, and is therefore not eligible to send the custom verification email.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#GetAccountSendingEnabled": { "type": "operation", "output": { "target": "com.amazonaws.ses#GetAccountSendingEnabledResponse" }, "traits": { "smithy.api#documentation": "

Returns the email sending status of the Amazon SES account for the current region.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#GetAccountSendingEnabledResponse": { "type": "structure", "members": { "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether email sending is enabled or disabled for your Amazon SES account in the\n current AWS Region.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the email sending status for your Amazon SES account in the\n current AWS Region.

" } }, "com.amazonaws.ses#GetCustomVerificationEmailTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetCustomVerificationEmailTemplateRequest" }, "output": { "target": "com.amazonaws.ses#GetCustomVerificationEmailTemplateResponse" }, "errors": [ { "target": "com.amazonaws.ses#CustomVerificationEmailTemplateDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Returns the custom email verification template for the template name you\n specify.

\n

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#GetCustomVerificationEmailTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template that you want to retrieve.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to retrieve an existing custom verification email\n template.

" } }, "com.amazonaws.ses#GetCustomVerificationEmailTemplateResponse": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template.

" } }, "FromEmailAddress": { "target": "com.amazonaws.ses#FromAddress", "traits": { "smithy.api#documentation": "

The email address that the custom verification email is sent from.

" } }, "TemplateSubject": { "target": "com.amazonaws.ses#Subject", "traits": { "smithy.api#documentation": "

The subject line of the custom verification email.

" } }, "TemplateContent": { "target": "com.amazonaws.ses#TemplateContent", "traits": { "smithy.api#documentation": "

The content of the custom verification email.

" } }, "SuccessRedirectionURL": { "target": "com.amazonaws.ses#SuccessRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is successfully verified.

" } }, "FailureRedirectionURL": { "target": "com.amazonaws.ses#FailureRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is not successfully verified.

" } } }, "traits": { "smithy.api#documentation": "

The content of the custom verification email template.

" } }, "com.amazonaws.ses#GetIdentityDkimAttributes": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetIdentityDkimAttributesRequest" }, "output": { "target": "com.amazonaws.ses#GetIdentityDkimAttributesResponse" }, "traits": { "smithy.api#documentation": "

Returns the current status of Easy DKIM signing for an entity. For domain name\n identities, this operation also returns the DKIM tokens that are required for Easy DKIM\n signing, and whether Amazon SES has successfully verified that these tokens have been\n published.

\n

This operation takes a list of identities as input and returns the following\n information for each:

\n \n

This operation is throttled at one request per second and can only get DKIM attributes\n for up to 100 identities at a time.

\n

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#GetIdentityDkimAttributesRequest": { "type": "structure", "members": { "Identities": { "target": "com.amazonaws.ses#IdentityList", "traits": { "smithy.api#documentation": "

A list of one or more verified identities - email addresses, domains, or both.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request for the status of Amazon SES Easy DKIM signing for an identity. For\n domain identities, this request also returns the DKIM tokens that are required for Easy\n DKIM signing, and whether Amazon SES successfully verified that these tokens were published.\n For more information about Easy DKIM, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#GetIdentityDkimAttributesResponse": { "type": "structure", "members": { "DkimAttributes": { "target": "com.amazonaws.ses#DkimAttributes", "traits": { "smithy.api#documentation": "

The DKIM attributes for an email address or a domain.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the status of Amazon SES Easy DKIM signing for an identity. For domain\n identities, this response also contains the DKIM tokens that are required for Easy DKIM\n signing, and whether Amazon SES successfully verified that these tokens were\n published.

" } }, "com.amazonaws.ses#GetIdentityMailFromDomainAttributes": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetIdentityMailFromDomainAttributesRequest" }, "output": { "target": "com.amazonaws.ses#GetIdentityMailFromDomainAttributesResponse" }, "traits": { "smithy.api#documentation": "

Returns the custom MAIL FROM attributes for a list of identities (email addresses :\n domains).

\n

This operation is throttled at one request per second and can only get custom MAIL\n FROM attributes for up to 100 identities at a time.

" } }, "com.amazonaws.ses#GetIdentityMailFromDomainAttributesRequest": { "type": "structure", "members": { "Identities": { "target": "com.amazonaws.ses#IdentityList", "traits": { "smithy.api#documentation": "

A list of one or more identities.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the Amazon SES custom MAIL FROM attributes for a list of\n identities. For information about using a custom MAIL FROM domain, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#GetIdentityMailFromDomainAttributesResponse": { "type": "structure", "members": { "MailFromDomainAttributes": { "target": "com.amazonaws.ses#MailFromDomainAttributes", "traits": { "smithy.api#documentation": "

A map of identities to custom MAIL FROM attributes.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the custom MAIL FROM attributes for a list of identities.

" } }, "com.amazonaws.ses#GetIdentityNotificationAttributes": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetIdentityNotificationAttributesRequest" }, "output": { "target": "com.amazonaws.ses#GetIdentityNotificationAttributesResponse" }, "traits": { "smithy.api#documentation": "

Given a list of verified identities (email addresses and/or domains), returns a\n structure describing identity notification attributes.

\n

This operation is throttled at one request per second and can only get notification\n attributes for up to 100 identities at a time.

\n

For more information about using notifications with Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#GetIdentityNotificationAttributesRequest": { "type": "structure", "members": { "Identities": { "target": "com.amazonaws.ses#IdentityList", "traits": { "smithy.api#documentation": "

A list of one or more identities. You can specify an identity by using its name or by\n using its Amazon Resource Name (ARN). Examples: user@example.com,\n example.com,\n arn:aws:ses:us-east-1:123456789012:identity/example.com.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the notification attributes for a list of identities\n you verified with Amazon SES. For information about Amazon SES notifications, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#GetIdentityNotificationAttributesResponse": { "type": "structure", "members": { "NotificationAttributes": { "target": "com.amazonaws.ses#NotificationAttributes", "traits": { "smithy.api#documentation": "

A map of Identity to IdentityNotificationAttributes.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the notification attributes for a list of identities.

" } }, "com.amazonaws.ses#GetIdentityPolicies": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetIdentityPoliciesRequest" }, "output": { "target": "com.amazonaws.ses#GetIdentityPoliciesResponse" }, "traits": { "smithy.api#documentation": "

Returns the requested sending authorization policies for the given identity (an email\n address or a domain). The policies are returned as a map of policy names to policy\n contents. You can retrieve a maximum of 20 policies at a time.

\n \n

This API is for the identity owner only. If you have not verified the identity,\n this API will return an error.

\n
\n

Sending authorization is a feature that enables an identity owner to authorize other\n senders to use its identities. For information about using sending authorization, see\n the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#GetIdentityPoliciesRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity for which the policies will be retrieved. You can specify an identity by\n using its name or by using its Amazon Resource Name (ARN). Examples:\n user@example.com, example.com,\n arn:aws:ses:us-east-1:123456789012:identity/example.com.

\n

To successfully call this API, you must own the identity.

", "smithy.api#required": {} } }, "PolicyNames": { "target": "com.amazonaws.ses#PolicyNameList", "traits": { "smithy.api#documentation": "

A list of the names of policies to be retrieved. You can retrieve a maximum of 20\n policies at a time. If you do not know the names of the policies that are attached to\n the identity, you can use ListIdentityPolicies.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the requested sending authorization policies for an\n identity. Sending authorization is an Amazon SES feature that enables you to authorize other\n senders to use your identities. For information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#GetIdentityPoliciesResponse": { "type": "structure", "members": { "Policies": { "target": "com.amazonaws.ses#PolicyMap", "traits": { "smithy.api#documentation": "

A map of policy names to policies.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the requested sending authorization policies.

" } }, "com.amazonaws.ses#GetIdentityVerificationAttributes": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetIdentityVerificationAttributesRequest" }, "output": { "target": "com.amazonaws.ses#GetIdentityVerificationAttributesResponse" }, "traits": { "smithy.api#documentation": "

Given a list of identities (email addresses and/or domains), returns the verification\n status and (for domain identities) the verification token for each identity.

\n

The verification status of an email address is \"Pending\" until the email address owner\n clicks the link within the verification email that Amazon SES sent to that address. If the\n email address owner clicks the link within 24 hours, the verification status of the\n email address changes to \"Success\". If the link is not clicked within 24 hours, the\n verification status changes to \"Failed.\" In that case, if you still want to verify the\n email address, you must restart the verification process from the beginning.

\n

For domain identities, the domain's verification status is \"Pending\" as Amazon SES searches\n for the required TXT record in the DNS settings of the domain. When Amazon SES detects the\n record, the domain's verification status changes to \"Success\". If Amazon SES is unable to\n detect the record within 72 hours, the domain's verification status changes to \"Failed.\"\n In that case, if you still want to verify the domain, you must restart the verification\n process from the beginning.

\n

This operation is throttled at one request per second and can only get verification\n attributes for up to 100 identities at a time.

", "smithy.waiters#waitable": { "IdentityExists": { "acceptors": [ { "state": "success", "matcher": { "output": { "path": "VerificationAttributes.*.VerificationStatus", "expected": "Success", "comparator": "allStringEquals" } } } ], "minDelay": 3 } } } }, "com.amazonaws.ses#GetIdentityVerificationAttributesRequest": { "type": "structure", "members": { "Identities": { "target": "com.amazonaws.ses#IdentityList", "traits": { "smithy.api#documentation": "

A list of identities.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return the Amazon SES verification status of a list of identities.\n For domain identities, this request also returns the verification token. For information\n about verifying identities with Amazon SES, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#GetIdentityVerificationAttributesResponse": { "type": "structure", "members": { "VerificationAttributes": { "target": "com.amazonaws.ses#VerificationAttributes", "traits": { "smithy.api#documentation": "

A map of Identities to IdentityVerificationAttributes objects.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

The Amazon SES verification status of a list of identities. For domain identities, this\n response also contains the verification token.

" } }, "com.amazonaws.ses#GetSendQuota": { "type": "operation", "output": { "target": "com.amazonaws.ses#GetSendQuotaResponse" }, "traits": { "smithy.api#documentation": "

Provides the sending limits for the Amazon SES account.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#GetSendQuotaResponse": { "type": "structure", "members": { "Max24HourSend": { "target": "com.amazonaws.ses#Max24HourSend", "traits": { "smithy.api#documentation": "

The maximum number of emails the user is allowed to send in a 24-hour interval. A\n value of -1 signifies an unlimited quota.

" } }, "MaxSendRate": { "target": "com.amazonaws.ses#MaxSendRate", "traits": { "smithy.api#documentation": "

The maximum number of emails that Amazon SES can accept from the user's account per\n second.

\n \n

The rate at which Amazon SES accepts the user's messages might be less than the maximum\n send rate.

\n
" } }, "SentLast24Hours": { "target": "com.amazonaws.ses#SentLast24Hours", "traits": { "smithy.api#documentation": "

The number of emails sent during the previous 24 hours.

" } } }, "traits": { "smithy.api#documentation": "

Represents your Amazon SES daily sending quota, maximum send rate, and the number of emails\n you have sent in the last 24 hours.

" } }, "com.amazonaws.ses#GetSendStatistics": { "type": "operation", "output": { "target": "com.amazonaws.ses#GetSendStatisticsResponse" }, "traits": { "smithy.api#documentation": "

Provides sending statistics for the current AWS Region. The result is a list of data\n points, representing the last two weeks of sending activity. Each data point in the list\n contains statistics for a 15-minute period of time.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#GetSendStatisticsResponse": { "type": "structure", "members": { "SendDataPoints": { "target": "com.amazonaws.ses#SendDataPointList", "traits": { "smithy.api#documentation": "

A list of data points, each of which represents 15 minutes of activity.

" } } }, "traits": { "smithy.api#documentation": "

Represents a list of data points. This list contains aggregated data from the previous\n two weeks of your sending activity with Amazon SES.

" } }, "com.amazonaws.ses#GetTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#GetTemplateRequest" }, "output": { "target": "com.amazonaws.ses#GetTemplateResponse" }, "errors": [ { "target": "com.amazonaws.ses#TemplateDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Displays the template object (which includes the Subject line, HTML part and text\n part) for the template you specify.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#GetTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the template you want to retrieve.

", "smithy.api#required": {} } } } }, "com.amazonaws.ses#GetTemplateResponse": { "type": "structure", "members": { "Template": { "target": "com.amazonaws.ses#Template" } } }, "com.amazonaws.ses#HeaderName": { "type": "string" }, "com.amazonaws.ses#HeaderValue": { "type": "string" }, "com.amazonaws.ses#HtmlPart": { "type": "string" }, "com.amazonaws.ses#Identity": { "type": "string" }, "com.amazonaws.ses#IdentityDkimAttributes": { "type": "structure", "members": { "DkimEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Is true if DKIM signing is enabled for email sent from the identity. It's false\n otherwise. The default value is true.

", "smithy.api#required": {} } }, "DkimVerificationStatus": { "target": "com.amazonaws.ses#VerificationStatus", "traits": { "smithy.api#documentation": "

Describes whether Amazon SES has successfully verified the DKIM DNS records (tokens)\n published in the domain name's DNS. (This only applies to domain identities, not email\n address identities.)

", "smithy.api#required": {} } }, "DkimTokens": { "target": "com.amazonaws.ses#VerificationTokenList", "traits": { "smithy.api#documentation": "

A set of character strings that represent the domain's identity. Using these tokens,\n you need to create DNS CNAME records that point to DKIM public keys that are hosted by\n Amazon SES. Amazon Web Services eventually detects that you've updated your DNS records. This detection\n process might take up to 72 hours. After successful detection, Amazon SES is able to\n DKIM-sign email originating from that domain. (This only applies to domain identities,\n not email address identities.)

\n

For more information about creating DNS records using DKIM tokens, see the Amazon SES Developer\n Guide.

" } } }, "traits": { "smithy.api#documentation": "

Represents the DKIM attributes of a verified email address or a domain.

" } }, "com.amazonaws.ses#IdentityList": { "type": "list", "member": { "target": "com.amazonaws.ses#Identity" } }, "com.amazonaws.ses#IdentityMailFromDomainAttributes": { "type": "structure", "members": { "MailFromDomain": { "target": "com.amazonaws.ses#MailFromDomainName", "traits": { "smithy.api#documentation": "

The custom MAIL FROM domain that the identity is configured to use.

", "smithy.api#required": {} } }, "MailFromDomainStatus": { "target": "com.amazonaws.ses#CustomMailFromStatus", "traits": { "smithy.api#documentation": "

The state that indicates whether Amazon SES has successfully read the MX record required\n for custom MAIL FROM domain setup. If the state is Success, Amazon SES uses the\n specified custom MAIL FROM domain when the verified identity sends an email. All other\n states indicate that Amazon SES takes the action described by\n BehaviorOnMXFailure.

", "smithy.api#required": {} } }, "BehaviorOnMXFailure": { "target": "com.amazonaws.ses#BehaviorOnMXFailure", "traits": { "smithy.api#documentation": "

The action that Amazon SES takes if it cannot successfully read the required MX record when\n you send an email. A value of UseDefaultValue indicates that if Amazon SES\n cannot read the required MX record, it uses amazonses.com (or a subdomain of that) as\n the MAIL FROM domain. A value of RejectMessage indicates that if Amazon SES\n cannot read the required MX record, Amazon SES returns a\n MailFromDomainNotVerified error and does not send the email.

\n

The custom MAIL FROM setup states that result in this behavior are\n Pending, Failed, and TemporaryFailure.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the custom MAIL FROM domain attributes of a verified identity (email\n address or domain).

" } }, "com.amazonaws.ses#IdentityNotificationAttributes": { "type": "structure", "members": { "BounceTopic": { "target": "com.amazonaws.ses#NotificationTopic", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish bounce\n notifications.

", "smithy.api#required": {} } }, "ComplaintTopic": { "target": "com.amazonaws.ses#NotificationTopic", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish complaint\n notifications.

", "smithy.api#required": {} } }, "DeliveryTopic": { "target": "com.amazonaws.ses#NotificationTopic", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic where Amazon SES will publish delivery\n notifications.

", "smithy.api#required": {} } }, "ForwardingEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether Amazon SES will forward bounce and complaint notifications as email.\n true indicates that Amazon SES will forward bounce and complaint\n notifications as email, while false indicates that bounce and complaint\n notifications will be published only to the specified bounce and complaint Amazon SNS\n topics.

", "smithy.api#required": {} } }, "HeadersInBounceNotificationsEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of\n type Bounce. A value of true specifies that Amazon SES will include\n headers in bounce notifications, and a value of false specifies that Amazon SES\n will not include headers in bounce notifications.

" } }, "HeadersInComplaintNotificationsEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of\n type Complaint. A value of true specifies that Amazon SES will\n include headers in complaint notifications, and a value of false specifies\n that Amazon SES will not include headers in complaint notifications.

" } }, "HeadersInDeliveryNotificationsEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether Amazon SES includes the original email headers in Amazon SNS notifications of\n type Delivery. A value of true specifies that Amazon SES will\n include headers in delivery notifications, and a value of false specifies\n that Amazon SES will not include headers in delivery notifications.

" } } }, "traits": { "smithy.api#documentation": "

Represents the notification attributes of an identity, including whether an identity\n has Amazon Simple Notification Service (Amazon SNS) topics set for bounce, complaint, and/or delivery notifications,\n and whether feedback forwarding is enabled for bounce and complaint\n notifications.

" } }, "com.amazonaws.ses#IdentityType": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "EmailAddress", "name": "EmailAddress" }, { "value": "Domain", "name": "Domain" } ] } }, "com.amazonaws.ses#IdentityVerificationAttributes": { "type": "structure", "members": { "VerificationStatus": { "target": "com.amazonaws.ses#VerificationStatus", "traits": { "smithy.api#documentation": "

The verification status of the identity: \"Pending\", \"Success\", \"Failed\", or\n \"TemporaryFailure\".

", "smithy.api#required": {} } }, "VerificationToken": { "target": "com.amazonaws.ses#VerificationToken", "traits": { "smithy.api#documentation": "

The verification token for a domain identity. Null for email address\n identities.

" } } }, "traits": { "smithy.api#documentation": "

Represents the verification attributes of a single identity.

" } }, "com.amazonaws.ses#InvalidCloudWatchDestinationException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "EventDestinationName": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

Indicates that the event destination does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the Amazon CloudWatch destination is invalid. See the error message for\n details.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidConfigurationSetException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the configuration set is invalid. See the error message for\n details.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidDeliveryOptionsException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that provided delivery option is invalid.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidFirehoseDestinationException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "EventDestinationName": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

Indicates that the event destination does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the Amazon Kinesis Firehose destination is invalid. See the error\n message for details.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidLambdaFunctionException": { "type": "structure", "members": { "FunctionArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

Indicates that the ARN of the function was not found.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the provided AWS Lambda function is invalid, or that Amazon SES could\n not execute the provided function, possibly due to permissions issues. For information\n about giving permissions, see the Amazon SES\n Developer Guide.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidPolicyException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the provided policy is invalid. Check the error stack for more\n information about what caused the error.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidRenderingParameterException": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName" }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that one or more of the replacement values you provided is invalid. This\n error may occur when the TemplateData object contains invalid JSON.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidS3ConfigurationException": { "type": "structure", "members": { "Bucket": { "target": "com.amazonaws.ses#S3BucketName", "traits": { "smithy.api#documentation": "

Indicated that the S3 Bucket was not found.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the provided Amazon S3 bucket or AWS KMS encryption key is invalid, or\n that Amazon SES could not publish to the bucket, possibly due to permissions issues. For\n information about giving permissions, see the Amazon SES\n Developer Guide.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidSNSDestinationException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that the configuration set does not exist.

" } }, "EventDestinationName": { "target": "com.amazonaws.ses#EventDestinationName", "traits": { "smithy.api#documentation": "

Indicates that the event destination does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the Amazon Simple Notification Service (Amazon SNS) destination is\n invalid. See the error message for details.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidSnsTopicException": { "type": "structure", "members": { "Topic": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

Indicates that the topic does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the provided Amazon SNS topic is invalid, or that Amazon SES could not\n publish to the topic, possibly due to permissions issues. For information about giving\n permissions, see the Amazon SES\n Developer Guide.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidTemplateException": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName" }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the template that you specified could not be rendered. This issue may\n occur when a template refers to a partial that does not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvalidTrackingOptionsException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the custom domain to be used for open and click tracking redirects is\n invalid. This error appears most often in the following situations:

\n ", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#InvocationType": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Event", "name": "Event" }, { "value": "RequestResponse", "name": "RequestResponse" } ] } }, "com.amazonaws.ses#KinesisFirehoseDestination": { "type": "structure", "members": { "IAMRoleARN": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the IAM role under which Amazon SES publishes email sending events to the Amazon Kinesis Firehose\n stream.

", "smithy.api#required": {} } }, "DeliveryStreamARN": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the Amazon Kinesis Firehose stream that email sending events should be published to.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Contains the delivery stream ARN and the IAM role ARN associated with an Amazon Kinesis Firehose event\n destination.

\n

Event destinations, such as Amazon Kinesis Firehose, are associated with configuration sets, which enable\n you to publish email sending events. For information about using configuration sets, see\n the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#LambdaAction": { "type": "structure", "members": { "TopicArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the Lambda action is\n taken. An example of an Amazon SNS topic ARN is\n arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about\n Amazon SNS topics, see the Amazon SNS Developer Guide.

" } }, "FunctionArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the AWS Lambda function. An example of an AWS Lambda\n function ARN is arn:aws:lambda:us-west-2:account-id:function:MyFunction.\n For more information about AWS Lambda, see the AWS Lambda Developer Guide.

", "smithy.api#required": {} } }, "InvocationType": { "target": "com.amazonaws.ses#InvocationType", "traits": { "smithy.api#documentation": "

The invocation type of the AWS Lambda function. An invocation type of\n RequestResponse means that the execution of the function will\n immediately result in a response, and a value of Event means that the\n function will be invoked asynchronously. The default value is Event. For\n information about AWS Lambda invocation types, see the AWS Lambda Developer Guide.

\n \n

There is a 30-second timeout on RequestResponse invocations. You\n should use Event invocation in most cases. Use\n RequestResponse only when you want to make a mail flow decision,\n such as whether to stop the receipt rule or the receipt rule set.

\n
" } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action calls an AWS Lambda function and,\n optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

\n

To enable Amazon SES to call your AWS Lambda function or to publish to an Amazon SNS topic of\n another account, Amazon SES must have permission to access those resources. For information\n about giving permissions, see the Amazon SES Developer\n Guide.

\n

For information about using AWS Lambda actions in receipt rules, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#LastAttemptDate": { "type": "timestamp" }, "com.amazonaws.ses#LastFreshStart": { "type": "timestamp" }, "com.amazonaws.ses#LimitExceededException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that a resource could not be created because of service limits. For a list\n of Amazon SES limits, see the Amazon SES Developer\n Guide.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#ListConfigurationSets": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListConfigurationSetsRequest" }, "output": { "target": "com.amazonaws.ses#ListConfigurationSetsResponse" }, "traits": { "smithy.api#documentation": "

Provides a list of the configuration sets associated with your Amazon SES account in the\n current AWS Region. For information about using configuration sets, see Monitoring Your Amazon SES Sending Activity in the Amazon SES Developer\n Guide.\n

\n

You can execute this operation no more than once per second. This operation will\n return up to 1,000 configuration sets each time it is run. If your Amazon SES account has\n more than 1,000 configuration sets, this operation will also return a NextToken element.\n You can then execute the ListConfigurationSets operation again, passing the\n NextToken parameter and the value of the NextToken element to retrieve\n additional results.

" } }, "com.amazonaws.ses#ListConfigurationSetsRequest": { "type": "structure", "members": { "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token returned from a previous call to ListConfigurationSets to\n indicate the position of the configuration set in the configuration set list.

" } }, "MaxItems": { "target": "com.amazonaws.ses#MaxItems", "traits": { "smithy.api#documentation": "

The number of configuration sets to return.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to list the configuration sets associated with your AWS account.\n Configuration sets enable you to publish email sending events. For information about\n using configuration sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ListConfigurationSetsResponse": { "type": "structure", "members": { "ConfigurationSets": { "target": "com.amazonaws.ses#ConfigurationSets", "traits": { "smithy.api#documentation": "

A list of configuration sets.

" } }, "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token indicating that there are additional configuration sets available to be\n listed. Pass this token to successive calls of ListConfigurationSets.\n

" } } }, "traits": { "smithy.api#documentation": "

A list of configuration sets associated with your AWS account. Configuration sets\n enable you to publish email sending events. For information about using configuration\n sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ListCustomVerificationEmailTemplates": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListCustomVerificationEmailTemplatesRequest" }, "output": { "target": "com.amazonaws.ses#ListCustomVerificationEmailTemplatesResponse" }, "traits": { "smithy.api#documentation": "

Lists the existing custom verification email templates for your account in the current\n AWS Region.

\n

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

", "smithy.api#paginated": { "inputToken": "NextToken", "outputToken": "NextToken", "pageSize": "MaxResults" } } }, "com.amazonaws.ses#ListCustomVerificationEmailTemplatesRequest": { "type": "structure", "members": { "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

An array the contains the name and creation time stamp for each template in your Amazon SES\n account.

" } }, "MaxResults": { "target": "com.amazonaws.ses#MaxResults", "traits": { "smithy.api#documentation": "

The maximum number of custom verification email templates to return. This value must\n be at least 1 and less than or equal to 50. If you do not specify a value, or if you\n specify a value less than 1 or greater than 50, the operation will return up to 50\n results.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to list the existing custom verification email templates for your\n account.

\n

For more information about custom verification email templates, see Using Custom\n Verification Email Templates in the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ListCustomVerificationEmailTemplatesResponse": { "type": "structure", "members": { "CustomVerificationEmailTemplates": { "target": "com.amazonaws.ses#CustomVerificationEmailTemplates", "traits": { "smithy.api#documentation": "

A list of the custom verification email templates that exist in your account.

" } }, "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token indicating that there are additional custom verification email templates\n available to be listed. Pass this token to a subsequent call to\n ListTemplates to retrieve the next 50 custom verification email\n templates.

" } } }, "traits": { "smithy.api#documentation": "

A paginated list of custom verification email templates.

" } }, "com.amazonaws.ses#ListIdentities": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListIdentitiesRequest" }, "output": { "target": "com.amazonaws.ses#ListIdentitiesResponse" }, "traits": { "smithy.api#documentation": "

Returns a list containing all of the identities (email addresses and domains) for your\n AWS account in the current AWS Region, regardless of verification status.

\n

You can execute this operation no more than once per second.

", "smithy.api#paginated": { "inputToken": "NextToken", "outputToken": "NextToken", "items": "Identities", "pageSize": "MaxItems" } } }, "com.amazonaws.ses#ListIdentitiesRequest": { "type": "structure", "members": { "IdentityType": { "target": "com.amazonaws.ses#IdentityType", "traits": { "smithy.api#documentation": "

The type of the identities to list. Possible values are \"EmailAddress\" and \"Domain\".\n If this parameter is omitted, then all identities will be listed.

" } }, "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

The token to use for pagination.

" } }, "MaxItems": { "target": "com.amazonaws.ses#MaxItems", "traits": { "smithy.api#documentation": "

The maximum number of identities per page. Possible values are 1-1000\n inclusive.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to return a list of all identities (email addresses and domains)\n that you have attempted to verify under your AWS account, regardless of verification\n status.

" } }, "com.amazonaws.ses#ListIdentitiesResponse": { "type": "structure", "members": { "Identities": { "target": "com.amazonaws.ses#IdentityList", "traits": { "smithy.api#documentation": "

A list of identities.

", "smithy.api#required": {} } }, "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

The token used for pagination.

" } } }, "traits": { "smithy.api#documentation": "

A list of all identities that you have attempted to verify under your AWS account,\n regardless of verification status.

" } }, "com.amazonaws.ses#ListIdentityPolicies": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListIdentityPoliciesRequest" }, "output": { "target": "com.amazonaws.ses#ListIdentityPoliciesResponse" }, "traits": { "smithy.api#documentation": "

Returns a list of sending authorization policies that are attached to the given\n identity (an email address or a domain). This API returns only a list. If you want the\n actual policy content, you can use GetIdentityPolicies.

\n \n

This API is for the identity owner only. If you have not verified the identity,\n this API will return an error.

\n
\n

Sending authorization is a feature that enables an identity owner to authorize other\n senders to use its identities. For information about using sending authorization, see\n the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#ListIdentityPoliciesRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity that is associated with the policy for which the policies will be listed.\n You can specify an identity by using its name or by using its Amazon Resource Name\n (ARN). Examples: user@example.com, example.com,\n arn:aws:ses:us-east-1:123456789012:identity/example.com.

\n

To successfully call this API, you must own the identity.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to return a list of sending authorization policies that are\n attached to an identity. Sending authorization is an Amazon SES feature that enables you to\n authorize other senders to use your identities. For information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#ListIdentityPoliciesResponse": { "type": "structure", "members": { "PolicyNames": { "target": "com.amazonaws.ses#PolicyNameList", "traits": { "smithy.api#documentation": "

A list of names of policies that apply to the specified identity.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

A list of names of sending authorization policies that apply to an identity.

" } }, "com.amazonaws.ses#ListReceiptFilters": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListReceiptFiltersRequest" }, "output": { "target": "com.amazonaws.ses#ListReceiptFiltersResponse" }, "traits": { "smithy.api#documentation": "

Lists the IP address filters associated with your AWS account in the current AWS\n Region.

\n

For information about managing IP address filters, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#ListReceiptFiltersRequest": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

Represents a request to list the IP address filters that exist under your AWS account.\n You use IP address filters when you receive email with Amazon SES. For more information, see\n the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ListReceiptFiltersResponse": { "type": "structure", "members": { "Filters": { "target": "com.amazonaws.ses#ReceiptFilterList", "traits": { "smithy.api#documentation": "

A list of IP address filter data structures, which each consist of a name, an IP\n address range, and whether to allow or block mail from it.

" } } }, "traits": { "smithy.api#documentation": "

A list of IP address filters that exist under your AWS account.

" } }, "com.amazonaws.ses#ListReceiptRuleSets": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListReceiptRuleSetsRequest" }, "output": { "target": "com.amazonaws.ses#ListReceiptRuleSetsResponse" }, "traits": { "smithy.api#documentation": "

Lists the receipt rule sets that exist under your AWS account in the current AWS\n Region. If there are additional receipt rule sets to be retrieved, you will receive a\n NextToken that you can provide to the next call to\n ListReceiptRuleSets to retrieve the additional entries.

\n

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#ListReceiptRuleSetsRequest": { "type": "structure", "members": { "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token returned from a previous call to ListReceiptRuleSets to indicate\n the position in the receipt rule set list.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to list the receipt rule sets that exist under your AWS account.\n You use receipt rule sets to receive email with Amazon SES. For more information, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ListReceiptRuleSetsResponse": { "type": "structure", "members": { "RuleSets": { "target": "com.amazonaws.ses#ReceiptRuleSetsLists", "traits": { "smithy.api#documentation": "

The metadata for the currently active receipt rule set. The metadata consists of the\n rule set name and the timestamp of when the rule set was created.

" } }, "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token indicating that there are additional receipt rule sets available to be listed.\n Pass this token to successive calls of ListReceiptRuleSets to retrieve up\n to 100 receipt rule sets at a time.

" } } }, "traits": { "smithy.api#documentation": "

A list of receipt rule sets that exist under your AWS account.

" } }, "com.amazonaws.ses#ListTemplates": { "type": "operation", "input": { "target": "com.amazonaws.ses#ListTemplatesRequest" }, "output": { "target": "com.amazonaws.ses#ListTemplatesResponse" }, "traits": { "smithy.api#documentation": "

Lists the email templates present in your Amazon SES account in the current AWS\n Region.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#ListTemplatesRequest": { "type": "structure", "members": { "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token returned from a previous call to ListTemplates to indicate the\n position in the list of email templates.

" } }, "MaxItems": { "target": "com.amazonaws.ses#MaxItems", "traits": { "smithy.api#documentation": "

The maximum number of templates to return. This value must be at least 1 and less than\n or equal to 10. If you do not specify a value, or if you specify a value less than 1 or\n greater than 10, the operation will return up to 10 results.

" } } } }, "com.amazonaws.ses#ListTemplatesResponse": { "type": "structure", "members": { "TemplatesMetadata": { "target": "com.amazonaws.ses#TemplateMetadataList", "traits": { "smithy.api#documentation": "

An array the contains the name and creation time stamp for each template in your Amazon SES\n account.

" } }, "NextToken": { "target": "com.amazonaws.ses#NextToken", "traits": { "smithy.api#documentation": "

A token indicating that there are additional email templates available to be listed.\n Pass this token to a subsequent call to ListTemplates to retrieve the next\n 50 email templates.

" } } } }, "com.amazonaws.ses#ListVerifiedEmailAddresses": { "type": "operation", "output": { "target": "com.amazonaws.ses#ListVerifiedEmailAddressesResponse" }, "traits": { "smithy.api#documentation": "

Deprecated. Use the ListIdentities operation to list the email addresses\n and domains associated with your account.

" } }, "com.amazonaws.ses#ListVerifiedEmailAddressesResponse": { "type": "structure", "members": { "VerifiedEmailAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

A list of email addresses that have been verified.

" } } }, "traits": { "smithy.api#documentation": "

A list of email addresses that you have verified with Amazon SES under your AWS\n account.

" } }, "com.amazonaws.ses#MailFromDomainAttributes": { "type": "map", "key": { "target": "com.amazonaws.ses#Identity" }, "value": { "target": "com.amazonaws.ses#IdentityMailFromDomainAttributes" } }, "com.amazonaws.ses#MailFromDomainName": { "type": "string" }, "com.amazonaws.ses#MailFromDomainNotVerifiedException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the message could not be sent because Amazon SES could not read the MX\n record required to use the specified MAIL FROM domain. For information about editing the\n custom MAIL FROM domain settings for an identity, see the Amazon SES Developer\n Guide.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#Max24HourSend": { "type": "double" }, "com.amazonaws.ses#MaxItems": { "type": "integer", "traits": { "smithy.api#box": {} } }, "com.amazonaws.ses#MaxResults": { "type": "integer", "traits": { "smithy.api#box": {}, "smithy.api#range": { "min": 1, "max": 50 } } }, "com.amazonaws.ses#MaxSendRate": { "type": "double" }, "com.amazonaws.ses#Message": { "type": "structure", "members": { "Subject": { "target": "com.amazonaws.ses#Content", "traits": { "smithy.api#documentation": "

The subject of the message: A short summary of the content, which will appear in the\n recipient's inbox.

", "smithy.api#required": {} } }, "Body": { "target": "com.amazonaws.ses#Body", "traits": { "smithy.api#documentation": "

The message body.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the message to be sent, composed of a subject and a body.

" } }, "com.amazonaws.ses#MessageData": { "type": "string" }, "com.amazonaws.ses#MessageDsn": { "type": "structure", "members": { "ReportingMta": { "target": "com.amazonaws.ses#ReportingMta", "traits": { "smithy.api#documentation": "

The reporting MTA that attempted to deliver the message, formatted as specified in\n RFC 3464\n (mta-name-type; mta-name). The default value is dns;\n inbound-smtp.[region].amazonaws.com.

", "smithy.api#required": {} } }, "ArrivalDate": { "target": "com.amazonaws.ses#ArrivalDate", "traits": { "smithy.api#documentation": "

When the message was received by the reporting mail transfer agent (MTA), in RFC 822 date-time format.

" } }, "ExtensionFields": { "target": "com.amazonaws.ses#ExtensionFieldList", "traits": { "smithy.api#documentation": "

Additional X-headers to include in the DSN.

" } } }, "traits": { "smithy.api#documentation": "

Message-related information to include in the Delivery Status Notification (DSN) when\n an email that Amazon SES receives on your behalf bounces.

\n

For information about receiving email through Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#MessageId": { "type": "string" }, "com.amazonaws.ses#MessageRejected": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the action failed, and the message could not be sent. Check the error\n stack for more information about what caused the error.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#MessageTag": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#MessageTagName", "traits": { "smithy.api#documentation": "

The name of the tag. The name must:

\n ", "smithy.api#required": {} } }, "Value": { "target": "com.amazonaws.ses#MessageTagValue", "traits": { "smithy.api#documentation": "

The value of the tag. The value must:

\n ", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Contains the name and value of a tag that you can provide to SendEmail or\n SendRawEmail to apply to an email.

\n

Message tags, which you use with configuration sets, enable you to publish email\n sending events. For information about using configuration sets, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#MessageTagList": { "type": "list", "member": { "target": "com.amazonaws.ses#MessageTag" } }, "com.amazonaws.ses#MessageTagName": { "type": "string" }, "com.amazonaws.ses#MessageTagValue": { "type": "string" }, "com.amazonaws.ses#MissingRenderingAttributeException": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName" }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that one or more of the replacement values for the specified template was\n not specified. Ensure that the TemplateData object contains references to all of the\n replacement tags in the specified template.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#NextToken": { "type": "string" }, "com.amazonaws.ses#NotificationAttributes": { "type": "map", "key": { "target": "com.amazonaws.ses#Identity" }, "value": { "target": "com.amazonaws.ses#IdentityNotificationAttributes" } }, "com.amazonaws.ses#NotificationTopic": { "type": "string" }, "com.amazonaws.ses#NotificationType": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Bounce", "name": "Bounce" }, { "value": "Complaint", "name": "Complaint" }, { "value": "Delivery", "name": "Delivery" } ] } }, "com.amazonaws.ses#Policy": { "type": "string", "traits": { "smithy.api#length": { "min": 1 } } }, "com.amazonaws.ses#PolicyMap": { "type": "map", "key": { "target": "com.amazonaws.ses#PolicyName" }, "value": { "target": "com.amazonaws.ses#Policy" } }, "com.amazonaws.ses#PolicyName": { "type": "string", "traits": { "smithy.api#length": { "min": 1, "max": 64 } } }, "com.amazonaws.ses#PolicyNameList": { "type": "list", "member": { "target": "com.amazonaws.ses#PolicyName" } }, "com.amazonaws.ses#ProductionAccessNotGrantedException": { "type": "structure", "members": { "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the account has not been granted production access.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#PutConfigurationSetDeliveryOptions": { "type": "operation", "input": { "target": "com.amazonaws.ses#PutConfigurationSetDeliveryOptionsRequest" }, "output": { "target": "com.amazonaws.ses#PutConfigurationSetDeliveryOptionsResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#InvalidDeliveryOptionsException" } ], "traits": { "smithy.api#documentation": "

Adds or updates the delivery options for a configuration set.

" } }, "com.amazonaws.ses#PutConfigurationSetDeliveryOptionsRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set that you want to specify the delivery options\n for.

", "smithy.api#required": {} } }, "DeliveryOptions": { "target": "com.amazonaws.ses#DeliveryOptions", "traits": { "smithy.api#documentation": "

Specifies whether messages that use the configuration set are required to use\n Transport Layer Security (TLS).

" } } }, "traits": { "smithy.api#documentation": "

A request to modify the delivery options for a configuration set.

" } }, "com.amazonaws.ses#PutConfigurationSetDeliveryOptionsResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An HTTP 200 response if the request succeeds, or an error message if the request\n fails.

" } }, "com.amazonaws.ses#PutIdentityPolicy": { "type": "operation", "input": { "target": "com.amazonaws.ses#PutIdentityPolicyRequest" }, "output": { "target": "com.amazonaws.ses#PutIdentityPolicyResponse" }, "errors": [ { "target": "com.amazonaws.ses#InvalidPolicyException" } ], "traits": { "smithy.api#documentation": "

Adds or updates a sending authorization policy for the specified identity (an email\n address or a domain).

\n \n

This API is for the identity owner only. If you have not verified the identity,\n this API will return an error.

\n
\n

Sending authorization is a feature that enables an identity owner to authorize other\n senders to use its identities. For information about using sending authorization, see\n the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#PutIdentityPolicyRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity that the policy will apply to. You can specify an identity by using its\n name or by using its Amazon Resource Name (ARN). Examples:\n user@example.com, example.com,\n arn:aws:ses:us-east-1:123456789012:identity/example.com.

\n

To successfully call this API, you must own the identity.

", "smithy.api#required": {} } }, "PolicyName": { "target": "com.amazonaws.ses#PolicyName", "traits": { "smithy.api#documentation": "

The name of the policy.

\n

The policy name cannot exceed 64 characters and can only include alphanumeric\n characters, dashes, and underscores.

", "smithy.api#required": {} } }, "Policy": { "target": "com.amazonaws.ses#Policy", "traits": { "smithy.api#documentation": "

The text of the policy in JSON format. The policy cannot exceed 4 KB.

\n

For information about the syntax of sending authorization policies, see the Amazon SES Developer\n Guide.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to add or update a sending authorization policy for an identity.\n Sending authorization is an Amazon SES feature that enables you to authorize other senders to\n use your identities. For information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#PutIdentityPolicyResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#RawMessage": { "type": "structure", "members": { "Data": { "target": "com.amazonaws.ses#RawMessageData", "traits": { "smithy.api#documentation": "

The raw data of the message. This data needs to base64-encoded if you are accessing\n Amazon SES directly through the HTTPS interface. If you are accessing Amazon SES using an AWS\n SDK, the SDK takes care of the base 64-encoding for you. In all cases, the client must\n ensure that the message format complies with Internet email standards regarding email\n header fields, MIME types, and MIME encoding.

\n

The To:, CC:, and BCC: headers in the raw message can contain a group list.

\n

If you are using SendRawEmail with sending authorization, you can include\n X-headers in the raw message to specify the \"Source,\" \"From,\" and \"Return-Path\"\n addresses. For more information, see the documentation for SendRawEmail.

\n \n

Do not include these X-headers in the DKIM signature, because they are removed by\n Amazon SES before sending the email.

\n
\n

For more information, go to the Amazon SES Developer\n Guide.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents the raw data of the message.

" } }, "com.amazonaws.ses#RawMessageData": { "type": "blob" }, "com.amazonaws.ses#ReceiptAction": { "type": "structure", "members": { "S3Action": { "target": "com.amazonaws.ses#S3Action", "traits": { "smithy.api#documentation": "

Saves the received message to an Amazon Simple Storage Service (Amazon S3) bucket and, optionally, publishes a\n notification to Amazon SNS.

" } }, "BounceAction": { "target": "com.amazonaws.ses#BounceAction", "traits": { "smithy.api#documentation": "

Rejects the received email by returning a bounce response to the sender and,\n optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

" } }, "WorkmailAction": { "target": "com.amazonaws.ses#WorkmailAction", "traits": { "smithy.api#documentation": "

Calls Amazon WorkMail and, optionally, publishes a notification to Amazon\n Amazon SNS.

" } }, "LambdaAction": { "target": "com.amazonaws.ses#LambdaAction", "traits": { "smithy.api#documentation": "

Calls an AWS Lambda function, and optionally, publishes a notification to Amazon SNS.

" } }, "StopAction": { "target": "com.amazonaws.ses#StopAction", "traits": { "smithy.api#documentation": "

Terminates the evaluation of the receipt rule set and optionally publishes a\n notification to Amazon SNS.

" } }, "AddHeaderAction": { "target": "com.amazonaws.ses#AddHeaderAction", "traits": { "smithy.api#documentation": "

Adds a header to the received email.

" } }, "SNSAction": { "target": "com.amazonaws.ses#SNSAction", "traits": { "smithy.api#documentation": "

Publishes the email content within a notification to Amazon SNS.

" } } }, "traits": { "smithy.api#documentation": "

An action that Amazon SES can take when it receives an email on behalf of one or more email\n addresses or domains that you own. An instance of this data type can represent only one\n action.

\n

For information about setting up receipt rules, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ReceiptActionsList": { "type": "list", "member": { "target": "com.amazonaws.ses#ReceiptAction" } }, "com.amazonaws.ses#ReceiptFilter": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#ReceiptFilterName", "traits": { "smithy.api#documentation": "

The name of the IP address filter. The name must:

\n ", "smithy.api#required": {} } }, "IpFilter": { "target": "com.amazonaws.ses#ReceiptIpFilter", "traits": { "smithy.api#documentation": "

A structure that provides the IP addresses to block or allow, and whether to block or\n allow incoming mail from them.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

A receipt IP address filter enables you to specify whether to accept or reject mail\n originating from an IP address or range of IP addresses.

\n

For information about setting up IP address filters, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#ReceiptFilterList": { "type": "list", "member": { "target": "com.amazonaws.ses#ReceiptFilter" } }, "com.amazonaws.ses#ReceiptFilterName": { "type": "string" }, "com.amazonaws.ses#ReceiptFilterPolicy": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Block", "name": "Block" }, { "value": "Allow", "name": "Allow" } ] } }, "com.amazonaws.ses#ReceiptIpFilter": { "type": "structure", "members": { "Policy": { "target": "com.amazonaws.ses#ReceiptFilterPolicy", "traits": { "smithy.api#documentation": "

Indicates whether to block or allow incoming mail from the specified IP\n addresses.

", "smithy.api#required": {} } }, "Cidr": { "target": "com.amazonaws.ses#Cidr", "traits": { "smithy.api#documentation": "

A single IP address or a range of IP addresses that you want to block or allow,\n specified in Classless Inter-Domain Routing (CIDR) notation. An example of a single\n email address is 10.0.0.1. An example of a range of IP addresses is 10.0.0.1/24. For\n more information about CIDR notation, see RFC 2317.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

A receipt IP address filter enables you to specify whether to accept or reject mail\n originating from an IP address or range of IP addresses.

\n

For information about setting up IP address filters, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#ReceiptRule": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#ReceiptRuleName", "traits": { "smithy.api#documentation": "

The name of the receipt rule. The name must:

\n ", "smithy.api#required": {} } }, "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

If true, the receipt rule is active. The default value is\n false.

" } }, "TlsPolicy": { "target": "com.amazonaws.ses#TlsPolicy", "traits": { "smithy.api#documentation": "

Specifies whether Amazon SES should require that incoming email is delivered over a\n connection encrypted with Transport Layer Security (TLS). If this parameter is set to\n Require, Amazon SES will bounce emails that are not received over TLS. The\n default is Optional.

" } }, "Recipients": { "target": "com.amazonaws.ses#RecipientsList", "traits": { "smithy.api#documentation": "

The recipient domains and email addresses that the receipt rule applies to. If this\n field is not specified, this rule will match all recipients under all verified\n domains.

" } }, "Actions": { "target": "com.amazonaws.ses#ReceiptActionsList", "traits": { "smithy.api#documentation": "

An ordered list of actions to perform on messages that match at least one of the\n recipient email addresses or domains specified in the receipt rule.

" } }, "ScanEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

If true, then messages that this receipt rule applies to are scanned for\n spam and viruses. The default value is false.

" } } }, "traits": { "smithy.api#documentation": "

Receipt rules enable you to specify which actions Amazon SES should take when it receives\n mail on behalf of one or more email addresses or domains that you own.

\n

Each receipt rule defines a set of email addresses or domains that it applies to. If\n the email addresses or domains match at least one recipient address of the message,\n Amazon SES executes all of the receipt rule's actions on the message.

\n

For information about setting up receipt rules, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#ReceiptRuleName": { "type": "string" }, "com.amazonaws.ses#ReceiptRuleNamesList": { "type": "list", "member": { "target": "com.amazonaws.ses#ReceiptRuleName" } }, "com.amazonaws.ses#ReceiptRuleSetMetadata": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set. The name must:

\n " } }, "CreatedTimestamp": { "target": "com.amazonaws.ses#Timestamp", "traits": { "smithy.api#documentation": "

The date and time the receipt rule set was created.

" } } }, "traits": { "smithy.api#documentation": "

Information about a receipt rule set.

\n

A receipt rule set is a collection of rules that specify what Amazon SES should do with\n mail it receives on behalf of your account's verified domains.

\n

For information about setting up receipt rule sets, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#ReceiptRuleSetName": { "type": "string" }, "com.amazonaws.ses#ReceiptRuleSetsLists": { "type": "list", "member": { "target": "com.amazonaws.ses#ReceiptRuleSetMetadata" } }, "com.amazonaws.ses#ReceiptRulesList": { "type": "list", "member": { "target": "com.amazonaws.ses#ReceiptRule" } }, "com.amazonaws.ses#Recipient": { "type": "string" }, "com.amazonaws.ses#RecipientDsnFields": { "type": "structure", "members": { "FinalRecipient": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that the message was ultimately delivered to. This corresponds to\n the Final-Recipient in the DSN. If not specified,\n FinalRecipient will be set to the Recipient specified in\n the BouncedRecipientInfo structure. Either FinalRecipient or\n the recipient in BouncedRecipientInfo must be a recipient of the original\n bounced message.

\n \n

Do not prepend the FinalRecipient email address with rfc\n 822;, as described in RFC 3798.

\n
" } }, "Action": { "target": "com.amazonaws.ses#DsnAction", "traits": { "smithy.api#documentation": "

The action performed by the reporting mail transfer agent (MTA) as a result of its\n attempt to deliver the message to the recipient address. This is required by RFC 3464.

", "smithy.api#required": {} } }, "RemoteMta": { "target": "com.amazonaws.ses#RemoteMta", "traits": { "smithy.api#documentation": "

The MTA to which the remote MTA attempted to deliver the message, formatted as\n specified in RFC 3464\n (mta-name-type; mta-name). This parameter typically applies only to\n propagating synchronous bounces.

" } }, "Status": { "target": "com.amazonaws.ses#DsnStatus", "traits": { "smithy.api#documentation": "

The status code that indicates what went wrong. This is required by RFC 3464.

", "smithy.api#required": {} } }, "DiagnosticCode": { "target": "com.amazonaws.ses#DiagnosticCode", "traits": { "smithy.api#documentation": "

An extended explanation of what went wrong; this is usually an SMTP response. See\n RFC 3463 for the correct\n formatting of this parameter.

" } }, "LastAttemptDate": { "target": "com.amazonaws.ses#LastAttemptDate", "traits": { "smithy.api#documentation": "

The time the final delivery attempt was made, in RFC 822 date-time format.

" } }, "ExtensionFields": { "target": "com.amazonaws.ses#ExtensionFieldList", "traits": { "smithy.api#documentation": "

Additional X-headers to include in the DSN.

" } } }, "traits": { "smithy.api#documentation": "

Recipient-related information to include in the Delivery Status Notification (DSN)\n when an email that Amazon SES receives on your behalf bounces.

\n

For information about receiving email through Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#RecipientsList": { "type": "list", "member": { "target": "com.amazonaws.ses#Recipient" } }, "com.amazonaws.ses#RemoteMta": { "type": "string" }, "com.amazonaws.ses#RenderedTemplate": { "type": "string" }, "com.amazonaws.ses#ReorderReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#ReorderReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#ReorderReceiptRuleSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#RuleDoesNotExistException" }, { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Reorders the receipt rules within a receipt rule set.

\n \n

All of the rules in the rule set must be represented in this request. That is,\n this API will return an error if the reorder request doesn't explicitly position all\n of the rules.

\n
\n

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#ReorderReceiptRuleSetRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set to reorder.

", "smithy.api#required": {} } }, "RuleNames": { "target": "com.amazonaws.ses#ReceiptRuleNamesList", "traits": { "smithy.api#documentation": "

A list of the specified receipt rule set's receipt rules in the order that you want to\n put them.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to reorder the receipt rules within a receipt rule set. You use\n receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#ReorderReceiptRuleSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#ReportingMta": { "type": "string" }, "com.amazonaws.ses#ReputationOptions": { "type": "structure", "members": { "SendingEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether email sending is enabled or disabled for the configuration set. If\n the value is true, then Amazon SES will send emails that use the configuration\n set. If the value is false, Amazon SES will not send emails that use the\n configuration set. The default value is true. You can change this setting\n using UpdateConfigurationSetSendingEnabled.

" } }, "ReputationMetricsEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether or not Amazon SES publishes reputation metrics for the configuration set,\n such as bounce and complaint rates, to Amazon CloudWatch.

\n

If the value is true, reputation metrics are published. If the value is\n false, reputation metrics are not published. The default value is\n false.

" } }, "LastFreshStart": { "target": "com.amazonaws.ses#LastFreshStart", "traits": { "smithy.api#documentation": "

The date and time at which the reputation metrics for the configuration set were last\n reset. Resetting these metrics is known as a fresh start.

\n

When you disable email sending for a configuration set using UpdateConfigurationSetSendingEnabled and later re-enable it, the\n reputation metrics for the configuration set (but not for the entire Amazon SES account) are\n reset.

\n

If email sending for the configuration set has never been disabled and later\n re-enabled, the value of this attribute is null.

" } } }, "traits": { "smithy.api#documentation": "

Contains information about the reputation settings for a configuration set.

" } }, "com.amazonaws.ses#RuleDoesNotExistException": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#RuleOrRuleSetName", "traits": { "smithy.api#documentation": "

Indicates that the named receipt rule does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the provided receipt rule does not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#RuleOrRuleSetName": { "type": "string" }, "com.amazonaws.ses#RuleSetDoesNotExistException": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#RuleOrRuleSetName", "traits": { "smithy.api#documentation": "

Indicates that the named receipt rule set does not exist.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the provided receipt rule set does not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#S3Action": { "type": "structure", "members": { "TopicArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the Amazon SNS topic to notify when the message is saved to the Amazon S3 bucket. An\n example of an Amazon SNS topic ARN is\n arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about\n Amazon SNS topics, see the Amazon SNS Developer Guide.

" } }, "BucketName": { "target": "com.amazonaws.ses#S3BucketName", "traits": { "smithy.api#documentation": "

The name of the Amazon S3 bucket that incoming email will be saved to.

", "smithy.api#required": {} } }, "ObjectKeyPrefix": { "target": "com.amazonaws.ses#S3KeyPrefix", "traits": { "smithy.api#documentation": "

The key prefix of the Amazon S3 bucket. The key prefix is similar to a directory name that\n enables you to store similar data under the same directory in a bucket.

" } }, "KmsKeyArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The customer master key that Amazon SES should use to encrypt your emails before saving\n them to the Amazon S3 bucket. You can use the default master key or a custom master key you\n created in AWS KMS as follows:

\n \n

For more information about key policies, see the AWS KMS Developer Guide. If\n you do not specify a master key, Amazon SES will not encrypt your emails.

\n \n

Your mail is encrypted by Amazon SES using the Amazon S3 encryption client before the mail\n is submitted to Amazon S3 for storage. It is not encrypted using Amazon S3 server-side\n encryption. This means that you must use the Amazon S3 encryption client to decrypt the\n email after retrieving it from Amazon S3, as the service has no access to use your AWS\n KMS keys for decryption. This encryption client is currently available with the\n AWS SDK for Java and AWS SDK for Ruby only. For more\n information about client-side encryption using AWS KMS master keys, see the Amazon S3 Developer Guide.

\n
" } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action saves the received message to an Amazon Simple Storage Service\n (Amazon S3) bucket and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

\n

To enable Amazon SES to write emails to your Amazon S3 bucket, use an AWS KMS key to encrypt\n your emails, or publish to an Amazon SNS topic of another account, Amazon SES must have permission\n to access those resources. For information about giving permissions, see the Amazon SES Developer\n Guide.

\n \n

When you save your emails to an Amazon S3 bucket, the maximum email size (including\n headers) is 30 MB. Emails larger than that will bounce.

\n
\n

For information about specifying Amazon S3 actions in receipt rules, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#S3BucketName": { "type": "string" }, "com.amazonaws.ses#S3KeyPrefix": { "type": "string" }, "com.amazonaws.ses#SNSAction": { "type": "structure", "members": { "TopicArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic to notify. An example of an Amazon SNS\n topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For more\n information about Amazon SNS topics, see the Amazon SNS Developer Guide.

", "smithy.api#required": {} } }, "Encoding": { "target": "com.amazonaws.ses#SNSActionEncoding", "traits": { "smithy.api#documentation": "

The encoding to use for the email within the Amazon SNS notification. UTF-8 is easier to\n use, but may not preserve all special characters when a message was encoded with a\n different encoding format. Base64 preserves all special characters. The default value is\n UTF-8.

" } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action publishes a notification to Amazon Simple Notification Service\n (Amazon SNS). This action includes a complete copy of the email content in the Amazon SNS\n notifications. Amazon SNS notifications for all other actions simply provide information\n about the email. They do not include the email content itself.

\n

If you own the Amazon SNS topic, you don't need to do anything to give Amazon SES permission to\n publish emails to it. However, if you don't own the Amazon SNS topic, you need to attach a\n policy to the topic to give Amazon SES permissions to access it. For information about giving\n permissions, see the Amazon SES Developer\n Guide.

\n \n

You can only publish emails that are 150 KB or less (including the header) to\n Amazon SNS. Larger emails will bounce. If you anticipate emails larger than 150 KB, use\n the S3 action instead.

\n
\n

For information about using a receipt rule to publish an Amazon SNS notification, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SNSActionEncoding": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "UTF-8", "name": "UTF8" }, { "value": "Base64", "name": "Base64" } ] } }, "com.amazonaws.ses#SNSDestination": { "type": "structure", "members": { "TopicARN": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the Amazon SNS topic that email sending events will be published to. An example\n of an Amazon SNS topic ARN is arn:aws:sns:us-west-2:123456789012:MyTopic. For\n more information about Amazon SNS topics, see the Amazon SNS Developer Guide.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Contains the topic ARN associated with an Amazon Simple Notification Service (Amazon SNS) event destination.

\n

Event destinations, such as Amazon SNS, are associated with configuration sets, which\n enable you to publish email sending events. For information about using configuration\n sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SendBounce": { "type": "operation", "input": { "target": "com.amazonaws.ses#SendBounceRequest" }, "output": { "target": "com.amazonaws.ses#SendBounceResponse" }, "errors": [ { "target": "com.amazonaws.ses#MessageRejected" } ], "traits": { "smithy.api#documentation": "

Generates and sends a bounce message to the sender of an email you received through\n Amazon SES. You can only use this API on an email up to 24 hours after you receive it.

\n \n

You cannot use this API to send generic bounces for mail that was not received by\n Amazon SES.

\n
\n

For information about receiving email through Amazon SES, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#SendBounceRequest": { "type": "structure", "members": { "OriginalMessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The message ID of the message to be bounced.

", "smithy.api#required": {} } }, "BounceSender": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The address to use in the \"From\" header of the bounce message. This must be an\n identity that you have verified with Amazon SES.

", "smithy.api#required": {} } }, "Explanation": { "target": "com.amazonaws.ses#Explanation", "traits": { "smithy.api#documentation": "

Human-readable text for the bounce message to explain the failure. If not specified,\n the text will be auto-generated based on the bounced recipient information.

" } }, "MessageDsn": { "target": "com.amazonaws.ses#MessageDsn", "traits": { "smithy.api#documentation": "

Message-related DSN fields. If not specified, Amazon SES will choose the values.

" } }, "BouncedRecipientInfoList": { "target": "com.amazonaws.ses#BouncedRecipientInfoList", "traits": { "smithy.api#documentation": "

A list of recipients of the bounced message, including the information required to\n create the Delivery Status Notifications (DSNs) for the recipients. You must specify at\n least one BouncedRecipientInfo in the list.

", "smithy.api#required": {} } }, "BounceSenderArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to use the\n address in the \"From\" header of the bounce. For more information about sending\n authorization, see the Amazon SES Developer\n Guide.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to send a bounce message to the sender of an email you received\n through Amazon SES.

" } }, "com.amazonaws.ses#SendBounceResponse": { "type": "structure", "members": { "MessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The message ID of the bounce message.

" } } }, "traits": { "smithy.api#documentation": "

Represents a unique message ID.

" } }, "com.amazonaws.ses#SendBulkTemplatedEmail": { "type": "operation", "input": { "target": "com.amazonaws.ses#SendBulkTemplatedEmailRequest" }, "output": { "target": "com.amazonaws.ses#SendBulkTemplatedEmailResponse" }, "errors": [ { "target": "com.amazonaws.ses#AccountSendingPausedException" }, { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#ConfigurationSetSendingPausedException" }, { "target": "com.amazonaws.ses#MailFromDomainNotVerifiedException" }, { "target": "com.amazonaws.ses#MessageRejected" }, { "target": "com.amazonaws.ses#TemplateDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Composes an email message to multiple destinations. The message body is created using\n an email template.

\n

In order to send email using the SendBulkTemplatedEmail operation, your\n call to the API must meet the following requirements:

\n " } }, "com.amazonaws.ses#SendBulkTemplatedEmailRequest": { "type": "structure", "members": { "Source": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that is sending the email. This email address must be either\n individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.\n For information about verifying identities, see the Amazon SES Developer\n Guide.

\n

If you are sending on behalf of another user and have been permitted to do so by a\n sending authorization policy, then you must also specify the SourceArn\n parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

\n \n

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the\n local part of a source email address (the part of the email\n address that precedes the @ sign) may only contain 7-bit ASCII\n characters. If the domain part of an address (the\n part after the @ sign) contains non-ASCII characters, they must be encoded using\n Punycode, as described in RFC3492. The sender name (also known as the friendly\n name) may contain non-ASCII characters. These characters must be\n encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word\n syntax uses the following form:\n =?charset?encoding?encoded-text?=.

\n
", "smithy.api#required": {} } }, "SourceArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to send for\n the email address specified in the Source parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to send from user@example.com, then you\n would specify the SourceArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n Source to be user@example.com.

\n

For more information about sending authorization, see the Amazon SES Developer\n Guide.

" } }, "ReplyToAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

The reply-to email address(es) for the message. If the recipient replies to the\n message, each reply-to address will receive the reply.

" } }, "ReturnPath": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that bounces and complaints will be forwarded to when feedback\n forwarding is enabled. If the message cannot be delivered to the recipient, then an\n error message will be returned from the recipient's ISP; this message will then be\n forwarded to the email address specified by the ReturnPath parameter. The\n ReturnPath parameter is never overwritten. This email address must be\n either individually verified with Amazon SES, or from a domain that has been verified with\n Amazon SES.

" } }, "ReturnPathArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to use the\n email address specified in the ReturnPath parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to use feedback@example.com, then you\n would specify the ReturnPathArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n ReturnPath to be feedback@example.com.

\n

For more information about sending authorization, see the Amazon SES Developer\n Guide.

" } }, "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set to use when you send an email using\n SendBulkTemplatedEmail.

" } }, "DefaultTags": { "target": "com.amazonaws.ses#MessageTagList", "traits": { "smithy.api#documentation": "

A list of tags, in the form of name/value pairs, to apply to an email that you send to\n a destination using SendBulkTemplatedEmail.

" } }, "Template": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The template to use when sending this email.

", "smithy.api#required": {} } }, "TemplateArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the template to use when sending this email.

" } }, "DefaultTemplateData": { "target": "com.amazonaws.ses#TemplateData", "traits": { "smithy.api#documentation": "

A list of replacement values to apply to the template when replacement data is not\n specified in a Destination object. These values act as a default or fallback option when\n no other data is available.

\n

The template data is a JSON object, typically consisting of key-value pairs in which\n the keys correspond to replacement tags in the email template.

" } }, "Destinations": { "target": "com.amazonaws.ses#BulkEmailDestinationList", "traits": { "smithy.api#documentation": "

One or more Destination objects. All of the recipients in a\n Destination will receive the same version of the email. You can specify\n up to 50 Destination objects within a Destinations\n array.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to send a templated email to multiple destinations using Amazon SES.\n For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SendBulkTemplatedEmailResponse": { "type": "structure", "members": { "Status": { "target": "com.amazonaws.ses#BulkEmailDestinationStatusList", "traits": { "smithy.api#documentation": "

The unique message identifier returned from the SendBulkTemplatedEmail\n action.

", "smithy.api#required": {} } } } }, "com.amazonaws.ses#SendCustomVerificationEmail": { "type": "operation", "input": { "target": "com.amazonaws.ses#SendCustomVerificationEmailRequest" }, "output": { "target": "com.amazonaws.ses#SendCustomVerificationEmailResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#CustomVerificationEmailTemplateDoesNotExistException" }, { "target": "com.amazonaws.ses#FromEmailAddressNotVerifiedException" }, { "target": "com.amazonaws.ses#MessageRejected" }, { "target": "com.amazonaws.ses#ProductionAccessNotGrantedException" } ], "traits": { "smithy.api#documentation": "

Adds an email address to the list of identities for your Amazon SES account in the current\n AWS Region and attempts to verify it. As a result of executing this operation, a\n customized verification email is sent to the specified address.

\n

To use this operation, you must first create a custom verification email template. For\n more information about creating and using custom verification email templates, see\n Using Custom\n Verification Email Templates in the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#SendCustomVerificationEmailRequest": { "type": "structure", "members": { "EmailAddress": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address to verify.

", "smithy.api#required": {} } }, "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template to use when sending the\n verification email.

", "smithy.api#required": {} } }, "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Name of a configuration set to use when sending the verification email.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to send a custom verification email to a specified\n recipient.

" } }, "com.amazonaws.ses#SendCustomVerificationEmailResponse": { "type": "structure", "members": { "MessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The unique message identifier returned from the\n SendCustomVerificationEmail operation.

" } } }, "traits": { "smithy.api#documentation": "

The response received when attempting to send the custom verification email.

" } }, "com.amazonaws.ses#SendDataPoint": { "type": "structure", "members": { "Timestamp": { "target": "com.amazonaws.ses#Timestamp", "traits": { "smithy.api#documentation": "

Time of the data point.

" } }, "DeliveryAttempts": { "target": "com.amazonaws.ses#Counter", "traits": { "smithy.api#documentation": "

Number of emails that have been sent.

" } }, "Bounces": { "target": "com.amazonaws.ses#Counter", "traits": { "smithy.api#documentation": "

Number of emails that have bounced.

" } }, "Complaints": { "target": "com.amazonaws.ses#Counter", "traits": { "smithy.api#documentation": "

Number of unwanted emails that were rejected by recipients.

" } }, "Rejects": { "target": "com.amazonaws.ses#Counter", "traits": { "smithy.api#documentation": "

Number of emails rejected by Amazon SES.

" } } }, "traits": { "smithy.api#documentation": "

Represents sending statistics data. Each SendDataPoint contains\n statistics for a 15-minute period of sending activity.

" } }, "com.amazonaws.ses#SendDataPointList": { "type": "list", "member": { "target": "com.amazonaws.ses#SendDataPoint" } }, "com.amazonaws.ses#SendEmail": { "type": "operation", "input": { "target": "com.amazonaws.ses#SendEmailRequest" }, "output": { "target": "com.amazonaws.ses#SendEmailResponse" }, "errors": [ { "target": "com.amazonaws.ses#AccountSendingPausedException" }, { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#ConfigurationSetSendingPausedException" }, { "target": "com.amazonaws.ses#MailFromDomainNotVerifiedException" }, { "target": "com.amazonaws.ses#MessageRejected" } ], "traits": { "smithy.api#documentation": "

Composes an email message and immediately queues it for sending. In order to send\n email using the SendEmail operation, your message must meet the following\n requirements:

\n\n \n \n

For every message that you send, the total number of recipients (including each\n recipient in the To:, CC: and BCC: fields) is counted against the maximum number of\n emails you can send in a 24-hour period (your sending quota).\n For more information about sending quotas in Amazon SES, see Managing Your Amazon SES\n Sending Limits in the Amazon SES Developer Guide.\n

\n
" } }, "com.amazonaws.ses#SendEmailRequest": { "type": "structure", "members": { "Source": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that is sending the email. This email address must be either\n individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.\n For information about verifying identities, see the Amazon SES Developer\n Guide.

\n

If you are sending on behalf of another user and have been permitted to do so by a\n sending authorization policy, then you must also specify the SourceArn\n parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

\n \n

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the\n local part of a source email address (the part of the email\n address that precedes the @ sign) may only contain 7-bit ASCII\n characters. If the domain part of an address (the\n part after the @ sign) contains non-ASCII characters, they must be encoded using\n Punycode, as described in RFC3492. The sender name (also known as the friendly\n name) may contain non-ASCII characters. These characters must be\n encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word\n syntax uses the following form:\n =?charset?encoding?encoded-text?=.

\n
", "smithy.api#required": {} } }, "Destination": { "target": "com.amazonaws.ses#Destination", "traits": { "smithy.api#documentation": "

The destination for this email, composed of To:, CC:, and BCC: fields.

", "smithy.api#required": {} } }, "Message": { "target": "com.amazonaws.ses#Message", "traits": { "smithy.api#documentation": "

The message to be sent.

", "smithy.api#required": {} } }, "ReplyToAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

The reply-to email address(es) for the message. If the recipient replies to the\n message, each reply-to address will receive the reply.

" } }, "ReturnPath": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that bounces and complaints will be forwarded to when feedback\n forwarding is enabled. If the message cannot be delivered to the recipient, then an\n error message will be returned from the recipient's ISP; this message will then be\n forwarded to the email address specified by the ReturnPath parameter. The\n ReturnPath parameter is never overwritten. This email address must be\n either individually verified with Amazon SES, or from a domain that has been verified with\n Amazon SES.

" } }, "SourceArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to send for\n the email address specified in the Source parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to send from user@example.com, then you\n would specify the SourceArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n Source to be user@example.com.

\n

For more information about sending authorization, see the Amazon SES Developer\n Guide.

" } }, "ReturnPathArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to use the\n email address specified in the ReturnPath parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to use feedback@example.com, then you\n would specify the ReturnPathArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n ReturnPath to be feedback@example.com.

\n

For more information about sending authorization, see the Amazon SES Developer\n Guide.

" } }, "Tags": { "target": "com.amazonaws.ses#MessageTagList", "traits": { "smithy.api#documentation": "

A list of tags, in the form of name/value pairs, to apply to an email that you send\n using SendEmail. Tags correspond to characteristics of the email that you\n define, so that you can publish email sending events.

" } }, "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set to use when you send an email using\n SendEmail.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to send a single formatted email using Amazon SES. For more\n information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SendEmailResponse": { "type": "structure", "members": { "MessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The unique message identifier returned from the SendEmail action.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a unique message ID.

" } }, "com.amazonaws.ses#SendRawEmail": { "type": "operation", "input": { "target": "com.amazonaws.ses#SendRawEmailRequest" }, "output": { "target": "com.amazonaws.ses#SendRawEmailResponse" }, "errors": [ { "target": "com.amazonaws.ses#AccountSendingPausedException" }, { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#ConfigurationSetSendingPausedException" }, { "target": "com.amazonaws.ses#MailFromDomainNotVerifiedException" }, { "target": "com.amazonaws.ses#MessageRejected" } ], "traits": { "smithy.api#documentation": "

Composes an email message and immediately queues it for sending.

\n\n

This operation is more flexible than the SendEmail API operation. When\n you use the SendRawEmail operation, you can specify the headers of the\n message as well as its content. This flexibility is useful, for example, when you want\n to send a multipart MIME email (such a message that contains both a text and an HTML\n version). You can also use this operation to send messages that include\n attachments.

\n

The SendRawEmail operation has the following requirements:

\n \n\n\n\n

Additionally, keep the following considerations in mind when using the\n SendRawEmail operation:

\n\n " } }, "com.amazonaws.ses#SendRawEmailRequest": { "type": "structure", "members": { "Source": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The identity's email address. If you do not provide a value for this parameter, you\n must specify a \"From\" address in the raw text of the message. (You can also specify\n both.)

\n \n

Amazon SES does not support the SMTPUTF8 extension, as described inRFC6531. For this reason, the\n local part of a source email address (the part of the email\n address that precedes the @ sign) may only contain 7-bit ASCII\n characters. If the domain part of an address (the\n part after the @ sign) contains non-ASCII characters, they must be encoded using\n Punycode, as described in RFC3492. The sender name (also known as the friendly\n name) may contain non-ASCII characters. These characters must be\n encoded using MIME encoded-word syntax, as described in RFC 2047. MIME encoded-word\n syntax uses the following form:\n =?charset?encoding?encoded-text?=.

\n
\n\n

If you specify the Source parameter and have feedback forwarding enabled,\n then bounces and complaints will be sent to this email address. This takes precedence\n over any Return-Path header that you might include in the raw text of the\n message.

" } }, "Destinations": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

A list of destinations for the message, consisting of To:, CC:, and BCC:\n addresses.

" } }, "RawMessage": { "target": "com.amazonaws.ses#RawMessage", "traits": { "smithy.api#documentation": "

The raw email message itself. The message has to meet the following criteria:

\n ", "smithy.api#required": {} } }, "FromArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to specify a\n particular \"From\" address in the header of the raw email.

\n

Instead of using this parameter, you can use the X-header X-SES-FROM-ARN\n in the raw message of the email. If you use both the FromArn parameter and\n the corresponding X-header, Amazon SES uses the value of the FromArn\n parameter.

\n \n

For information about when to use this parameter, see the description of\n SendRawEmail in this guide, or see the Amazon SES Developer Guide.

\n
" } }, "SourceArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to send for\n the email address specified in the Source parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to send from user@example.com, then you\n would specify the SourceArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n Source to be user@example.com.

\n

Instead of using this parameter, you can use the X-header\n X-SES-SOURCE-ARN in the raw message of the email. If you use both the\n SourceArn parameter and the corresponding X-header, Amazon SES uses the\n value of the SourceArn parameter.

\n \n

For information about when to use this parameter, see the description of\n SendRawEmail in this guide, or see the Amazon SES Developer Guide.

\n
" } }, "ReturnPathArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to use the\n email address specified in the ReturnPath parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to use feedback@example.com, then you\n would specify the ReturnPathArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n ReturnPath to be feedback@example.com.

\n

Instead of using this parameter, you can use the X-header\n X-SES-RETURN-PATH-ARN in the raw message of the email. If you use both\n the ReturnPathArn parameter and the corresponding X-header, Amazon SES uses the\n value of the ReturnPathArn parameter.

\n \n

For information about when to use this parameter, see the description of\n SendRawEmail in this guide, or see the Amazon SES Developer Guide.

\n
" } }, "Tags": { "target": "com.amazonaws.ses#MessageTagList", "traits": { "smithy.api#documentation": "

A list of tags, in the form of name/value pairs, to apply to an email that you send\n using SendRawEmail. Tags correspond to characteristics of the email that\n you define, so that you can publish email sending events.

" } }, "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set to use when you send an email using\n SendRawEmail.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to send a single raw email using Amazon SES. For more information, see\n the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#SendRawEmailResponse": { "type": "structure", "members": { "MessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The unique message identifier returned from the SendRawEmail action.\n

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a unique message ID.

" } }, "com.amazonaws.ses#SendTemplatedEmail": { "type": "operation", "input": { "target": "com.amazonaws.ses#SendTemplatedEmailRequest" }, "output": { "target": "com.amazonaws.ses#SendTemplatedEmailResponse" }, "errors": [ { "target": "com.amazonaws.ses#AccountSendingPausedException" }, { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#ConfigurationSetSendingPausedException" }, { "target": "com.amazonaws.ses#MailFromDomainNotVerifiedException" }, { "target": "com.amazonaws.ses#MessageRejected" }, { "target": "com.amazonaws.ses#TemplateDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Composes an email message using an email template and immediately queues it for\n sending.

\n

In order to send email using the SendTemplatedEmail operation, your call\n to the API must meet the following requirements:

\n \n \n

If your call to the SendTemplatedEmail operation includes all of the\n required parameters, Amazon SES accepts it and returns a Message ID. However, if Amazon SES\n can't render the email because the template contains errors, it doesn't send the\n email. Additionally, because it already accepted the message, Amazon SES doesn't return a\n message stating that it was unable to send the email.

\n

For these reasons, we highly recommend that you set up Amazon SES to send you\n notifications when Rendering Failure events occur. For more information, see Sending\n Personalized Email Using the Amazon SES API in the Amazon Simple Email Service\n Developer Guide.

\n
" } }, "com.amazonaws.ses#SendTemplatedEmailRequest": { "type": "structure", "members": { "Source": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that is sending the email. This email address must be either\n individually verified with Amazon SES, or from a domain that has been verified with Amazon SES.\n For information about verifying identities, see the Amazon SES Developer\n Guide.

\n

If you are sending on behalf of another user and have been permitted to do so by a\n sending authorization policy, then you must also specify the SourceArn\n parameter. For more information about sending authorization, see the Amazon SES Developer Guide.

\n \n

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531. For this reason, the\n local part of a source email address (the part of the email\n address that precedes the @ sign) may only contain 7-bit ASCII\n characters. If the domain part of an address (the\n part after the @ sign) contains non-ASCII characters, they must be encoded using\n Punycode, as described in RFC3492. The sender name (also known as the friendly\n name) may contain non-ASCII characters. These characters must be\n encoded using MIME encoded-word syntax, as described inRFC 2047. MIME encoded-word\n syntax uses the following form:\n =?charset?encoding?encoded-text?=.

\n
", "smithy.api#required": {} } }, "Destination": { "target": "com.amazonaws.ses#Destination", "traits": { "smithy.api#documentation": "

The destination for this email, composed of To:, CC:, and BCC: fields. A Destination\n can include up to 50 recipients across these three fields.

", "smithy.api#required": {} } }, "ReplyToAddresses": { "target": "com.amazonaws.ses#AddressList", "traits": { "smithy.api#documentation": "

The reply-to email address(es) for the message. If the recipient replies to the\n message, each reply-to address will receive the reply.

" } }, "ReturnPath": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address that bounces and complaints will be forwarded to when feedback\n forwarding is enabled. If the message cannot be delivered to the recipient, then an\n error message will be returned from the recipient's ISP; this message will then be\n forwarded to the email address specified by the ReturnPath parameter. The\n ReturnPath parameter is never overwritten. This email address must be\n either individually verified with Amazon SES, or from a domain that has been verified with\n Amazon SES.

" } }, "SourceArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to send for\n the email address specified in the Source parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to send from user@example.com, then you\n would specify the SourceArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n Source to be user@example.com.

\n

For more information about sending authorization, see the Amazon SES Developer\n Guide.

" } }, "ReturnPathArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

This parameter is used only for sending authorization. It is the ARN of the identity\n that is associated with the sending authorization policy that permits you to use the\n email address specified in the ReturnPath parameter.

\n

For example, if the owner of example.com (which has ARN\n arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a\n policy to it that authorizes you to use feedback@example.com, then you\n would specify the ReturnPathArn to be\n arn:aws:ses:us-east-1:123456789012:identity/example.com, and the\n ReturnPath to be feedback@example.com.

\n

For more information about sending authorization, see the Amazon SES Developer\n Guide.

" } }, "Tags": { "target": "com.amazonaws.ses#MessageTagList", "traits": { "smithy.api#documentation": "

A list of tags, in the form of name/value pairs, to apply to an email that you send\n using SendTemplatedEmail. Tags correspond to characteristics of the email\n that you define, so that you can publish email sending events.

" } }, "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set to use when you send an email using\n SendTemplatedEmail.

" } }, "Template": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The template to use when sending this email.

", "smithy.api#required": {} } }, "TemplateArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the template to use when sending this email.

" } }, "TemplateData": { "target": "com.amazonaws.ses#TemplateData", "traits": { "smithy.api#documentation": "

A list of replacement values to apply to the template. This parameter is a JSON\n object, typically consisting of key-value pairs in which the keys correspond to\n replacement tags in the email template.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to send a templated email using Amazon SES. For more information, see\n the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SendTemplatedEmailResponse": { "type": "structure", "members": { "MessageId": { "target": "com.amazonaws.ses#MessageId", "traits": { "smithy.api#documentation": "

The unique message identifier returned from the SendTemplatedEmail\n action.

", "smithy.api#required": {} } } } }, "com.amazonaws.ses#SentLast24Hours": { "type": "double" }, "com.amazonaws.ses#SetActiveReceiptRuleSet": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetActiveReceiptRuleSetRequest" }, "output": { "target": "com.amazonaws.ses#SetActiveReceiptRuleSetResponse" }, "errors": [ { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Sets the specified receipt rule set as the active receipt rule set.

\n \n

To disable your email-receiving through Amazon SES completely, you can call this API\n with RuleSetName set to null.

\n
\n

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#SetActiveReceiptRuleSetRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set to make active. Setting this value to null disables\n all email receiving.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to set a receipt rule set as the active receipt rule set. You use\n receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#SetActiveReceiptRuleSetResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SetIdentityDkimEnabled": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetIdentityDkimEnabledRequest" }, "output": { "target": "com.amazonaws.ses#SetIdentityDkimEnabledResponse" }, "traits": { "smithy.api#documentation": "

Enables or disables Easy DKIM signing of email sent from an identity. If Easy DKIM\n signing is enabled for a domain, then Amazon SES uses DKIM to sign all email that it sends\n from addresses on that domain. If Easy DKIM signing is enabled for an email address,\n then Amazon SES uses DKIM to sign all email it sends from that address.

\n \n

For email addresses (for example, user@example.com), you can only\n enable DKIM signing if the corresponding domain (in this case,\n example.com) has been set up to use Easy DKIM.

\n
\n

You can enable DKIM signing for an identity at any time after you start the\n verification process for the identity, even if the verification process isn't complete.

\n

You can execute this operation no more than once per second.

\n

For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#SetIdentityDkimEnabledRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity for which DKIM signing should be enabled or disabled.

", "smithy.api#required": {} } }, "DkimEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Sets whether DKIM signing is enabled for an identity. Set to true to\n enable DKIM signing for this identity; false to disable it.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to enable or disable Amazon SES Easy DKIM signing for an identity. For\n more information about setting up Easy DKIM, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#SetIdentityDkimEnabledResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SetIdentityFeedbackForwardingEnabled": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetIdentityFeedbackForwardingEnabledRequest" }, "output": { "target": "com.amazonaws.ses#SetIdentityFeedbackForwardingEnabledResponse" }, "traits": { "smithy.api#documentation": "

Given an identity (an email address or a domain), enables or disables whether Amazon SES\n forwards bounce and complaint notifications as email. Feedback forwarding can only be\n disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and\n complaints.

\n \n

Feedback forwarding does not apply to delivery notifications. Delivery\n notifications are only available through Amazon SNS.

\n
\n

You can execute this operation no more than once per second.

\n

For more information about using notifications with Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#SetIdentityFeedbackForwardingEnabledRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity for which to set bounce and complaint notification forwarding. Examples:\n user@example.com, example.com.

", "smithy.api#required": {} } }, "ForwardingEnabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Sets whether Amazon SES will forward bounce and complaint notifications as email.\n true specifies that Amazon SES will forward bounce and complaint\n notifications as email, in addition to any Amazon SNS topic publishing otherwise specified.\n false specifies that Amazon SES will publish bounce and complaint\n notifications only through Amazon SNS. This value can only be set to false when\n Amazon SNS topics are set for both Bounce and Complaint\n notification types.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to enable or disable whether Amazon SES forwards you bounce and\n complaint notifications through email. For information about email feedback forwarding,\n see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SetIdentityFeedbackForwardingEnabledResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SetIdentityHeadersInNotificationsEnabled": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetIdentityHeadersInNotificationsEnabledRequest" }, "output": { "target": "com.amazonaws.ses#SetIdentityHeadersInNotificationsEnabledResponse" }, "traits": { "smithy.api#documentation": "

Given an identity (an email address or a domain), sets whether Amazon SES includes the\n original email headers in the Amazon Simple Notification Service (Amazon SNS) notifications of a specified\n type.

\n

You can execute this operation no more than once per second.

\n

For more information about using notifications with Amazon SES, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#SetIdentityHeadersInNotificationsEnabledRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity for which to enable or disable headers in notifications. Examples:\n user@example.com, example.com.

", "smithy.api#required": {} } }, "NotificationType": { "target": "com.amazonaws.ses#NotificationType", "traits": { "smithy.api#documentation": "

The notification type for which to enable or disable headers in notifications.

", "smithy.api#required": {} } }, "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Sets whether Amazon SES includes the original email headers in Amazon SNS notifications of the\n specified notification type. A value of true specifies that Amazon SES will\n include headers in notifications, and a value of false specifies that Amazon SES\n will not include headers in notifications.

\n

This value can only be set when NotificationType is already set to use a\n particular Amazon SNS topic.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to set whether Amazon SES includes the original email headers in the\n Amazon SNS notifications of a specified type. For information about notifications, see the\n Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SetIdentityHeadersInNotificationsEnabledResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SetIdentityMailFromDomain": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetIdentityMailFromDomainRequest" }, "output": { "target": "com.amazonaws.ses#SetIdentityMailFromDomainResponse" }, "traits": { "smithy.api#documentation": "

Enables or disables the custom MAIL FROM domain setup for a verified identity (an\n email address or a domain).

\n \n

To send emails using the specified MAIL FROM domain, you must add an MX record to\n your MAIL FROM domain's DNS settings. If you want your emails to pass Sender Policy\n Framework (SPF) checks, you must also add or update an SPF record. For more\n information, see the Amazon SES Developer\n Guide.

\n
\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#SetIdentityMailFromDomainRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The verified identity for which you want to enable or disable the specified custom\n MAIL FROM domain.

", "smithy.api#required": {} } }, "MailFromDomain": { "target": "com.amazonaws.ses#MailFromDomainName", "traits": { "smithy.api#documentation": "

The custom MAIL FROM domain that you want the verified identity to use. The MAIL FROM\n domain must 1) be a subdomain of the verified identity, 2) not be used in a \"From\"\n address if the MAIL FROM domain is the destination of email feedback forwarding (for\n more information, see the Amazon SES Developer Guide), and\n 3) not be used to receive emails. A value of null disables the custom MAIL\n FROM setting for the identity.

" } }, "BehaviorOnMXFailure": { "target": "com.amazonaws.ses#BehaviorOnMXFailure", "traits": { "smithy.api#documentation": "

The action that you want Amazon SES to take if it cannot successfully read the required MX\n record when you send an email. If you choose UseDefaultValue, Amazon SES will\n use amazonses.com (or a subdomain of that) as the MAIL FROM domain. If you choose\n RejectMessage, Amazon SES will return a\n MailFromDomainNotVerified error and not send the email.

\n

The action specified in BehaviorOnMXFailure is taken when the custom MAIL\n FROM domain setup is in the Pending, Failed, and\n TemporaryFailure states.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to enable or disable the Amazon SES custom MAIL FROM domain setup for\n a verified identity. For information about using a custom MAIL FROM domain, see the\n Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#SetIdentityMailFromDomainResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SetIdentityNotificationTopic": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetIdentityNotificationTopicRequest" }, "output": { "target": "com.amazonaws.ses#SetIdentityNotificationTopicResponse" }, "traits": { "smithy.api#documentation": "

Sets an Amazon Simple Notification Service (Amazon SNS) topic to use when delivering notifications. When you use\n this operation, you specify a verified identity, such as an email address or domain.\n When you send an email that uses the chosen identity in the Source field, Amazon SES sends\n notifications to the topic you specified. You can send bounce, complaint, or delivery\n notifications (or any combination of the three) to the Amazon SNS topic that you\n specify.

\n

You can execute this operation no more than once per second.

\n

For more information about feedback notification, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SetIdentityNotificationTopicRequest": { "type": "structure", "members": { "Identity": { "target": "com.amazonaws.ses#Identity", "traits": { "smithy.api#documentation": "

The identity (email address or domain) that you want to set the Amazon SNS topic\n for.

\n \n

You can only specify a verified identity for this parameter.

\n
\n

You can specify an identity by using its name or by using its Amazon Resource Name\n (ARN). The following examples are all valid identities: sender@example.com,\n example.com,\n arn:aws:ses:us-east-1:123456789012:identity/example.com.

", "smithy.api#required": {} } }, "NotificationType": { "target": "com.amazonaws.ses#NotificationType", "traits": { "smithy.api#documentation": "

The type of notifications that will be published to the specified Amazon SNS topic.

", "smithy.api#required": {} } }, "SnsTopic": { "target": "com.amazonaws.ses#NotificationTopic", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic. If the parameter is omitted from\n the request or a null value is passed, SnsTopic is cleared and publishing\n is disabled.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to specify the Amazon SNS topic to which Amazon SES will publish bounce,\n complaint, or delivery notifications for emails sent with that identity as the Source.\n For information about Amazon SES notifications, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#SetIdentityNotificationTopicResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SetReceiptRulePosition": { "type": "operation", "input": { "target": "com.amazonaws.ses#SetReceiptRulePositionRequest" }, "output": { "target": "com.amazonaws.ses#SetReceiptRulePositionResponse" }, "errors": [ { "target": "com.amazonaws.ses#RuleDoesNotExistException" }, { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Sets the position of the specified receipt rule in the receipt rule set.

\n

For information about managing receipt rules, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#SetReceiptRulePositionRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set that contains the receipt rule to reposition.

", "smithy.api#required": {} } }, "RuleName": { "target": "com.amazonaws.ses#ReceiptRuleName", "traits": { "smithy.api#documentation": "

The name of the receipt rule to reposition.

", "smithy.api#required": {} } }, "After": { "target": "com.amazonaws.ses#ReceiptRuleName", "traits": { "smithy.api#documentation": "

The name of the receipt rule after which to place the specified receipt rule.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to set the position of a receipt rule in a receipt rule set. You\n use receipt rule sets to receive email with Amazon SES. For more information, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#SetReceiptRulePositionResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#SimpleEmailService": { "type": "service", "version": "2010-12-01", "operations": [ { "target": "com.amazonaws.ses#CloneReceiptRuleSet" }, { "target": "com.amazonaws.ses#CreateConfigurationSet" }, { "target": "com.amazonaws.ses#CreateConfigurationSetEventDestination" }, { "target": "com.amazonaws.ses#CreateConfigurationSetTrackingOptions" }, { "target": "com.amazonaws.ses#CreateCustomVerificationEmailTemplate" }, { "target": "com.amazonaws.ses#CreateReceiptFilter" }, { "target": "com.amazonaws.ses#CreateReceiptRule" }, { "target": "com.amazonaws.ses#CreateReceiptRuleSet" }, { "target": "com.amazonaws.ses#CreateTemplate" }, { "target": "com.amazonaws.ses#DeleteConfigurationSet" }, { "target": "com.amazonaws.ses#DeleteConfigurationSetEventDestination" }, { "target": "com.amazonaws.ses#DeleteConfigurationSetTrackingOptions" }, { "target": "com.amazonaws.ses#DeleteCustomVerificationEmailTemplate" }, { "target": "com.amazonaws.ses#DeleteIdentity" }, { "target": "com.amazonaws.ses#DeleteIdentityPolicy" }, { "target": "com.amazonaws.ses#DeleteReceiptFilter" }, { "target": "com.amazonaws.ses#DeleteReceiptRule" }, { "target": "com.amazonaws.ses#DeleteReceiptRuleSet" }, { "target": "com.amazonaws.ses#DeleteTemplate" }, { "target": "com.amazonaws.ses#DeleteVerifiedEmailAddress" }, { "target": "com.amazonaws.ses#DescribeActiveReceiptRuleSet" }, { "target": "com.amazonaws.ses#DescribeConfigurationSet" }, { "target": "com.amazonaws.ses#DescribeReceiptRule" }, { "target": "com.amazonaws.ses#DescribeReceiptRuleSet" }, { "target": "com.amazonaws.ses#GetAccountSendingEnabled" }, { "target": "com.amazonaws.ses#GetCustomVerificationEmailTemplate" }, { "target": "com.amazonaws.ses#GetIdentityDkimAttributes" }, { "target": "com.amazonaws.ses#GetIdentityMailFromDomainAttributes" }, { "target": "com.amazonaws.ses#GetIdentityNotificationAttributes" }, { "target": "com.amazonaws.ses#GetIdentityPolicies" }, { "target": "com.amazonaws.ses#GetIdentityVerificationAttributes" }, { "target": "com.amazonaws.ses#GetSendQuota" }, { "target": "com.amazonaws.ses#GetSendStatistics" }, { "target": "com.amazonaws.ses#GetTemplate" }, { "target": "com.amazonaws.ses#ListConfigurationSets" }, { "target": "com.amazonaws.ses#ListCustomVerificationEmailTemplates" }, { "target": "com.amazonaws.ses#ListIdentities" }, { "target": "com.amazonaws.ses#ListIdentityPolicies" }, { "target": "com.amazonaws.ses#ListReceiptFilters" }, { "target": "com.amazonaws.ses#ListReceiptRuleSets" }, { "target": "com.amazonaws.ses#ListTemplates" }, { "target": "com.amazonaws.ses#ListVerifiedEmailAddresses" }, { "target": "com.amazonaws.ses#PutConfigurationSetDeliveryOptions" }, { "target": "com.amazonaws.ses#PutIdentityPolicy" }, { "target": "com.amazonaws.ses#ReorderReceiptRuleSet" }, { "target": "com.amazonaws.ses#SendBounce" }, { "target": "com.amazonaws.ses#SendBulkTemplatedEmail" }, { "target": "com.amazonaws.ses#SendCustomVerificationEmail" }, { "target": "com.amazonaws.ses#SendEmail" }, { "target": "com.amazonaws.ses#SendRawEmail" }, { "target": "com.amazonaws.ses#SendTemplatedEmail" }, { "target": "com.amazonaws.ses#SetActiveReceiptRuleSet" }, { "target": "com.amazonaws.ses#SetIdentityDkimEnabled" }, { "target": "com.amazonaws.ses#SetIdentityFeedbackForwardingEnabled" }, { "target": "com.amazonaws.ses#SetIdentityHeadersInNotificationsEnabled" }, { "target": "com.amazonaws.ses#SetIdentityMailFromDomain" }, { "target": "com.amazonaws.ses#SetIdentityNotificationTopic" }, { "target": "com.amazonaws.ses#SetReceiptRulePosition" }, { "target": "com.amazonaws.ses#TestRenderTemplate" }, { "target": "com.amazonaws.ses#UpdateAccountSendingEnabled" }, { "target": "com.amazonaws.ses#UpdateConfigurationSetEventDestination" }, { "target": "com.amazonaws.ses#UpdateConfigurationSetReputationMetricsEnabled" }, { "target": "com.amazonaws.ses#UpdateConfigurationSetSendingEnabled" }, { "target": "com.amazonaws.ses#UpdateConfigurationSetTrackingOptions" }, { "target": "com.amazonaws.ses#UpdateCustomVerificationEmailTemplate" }, { "target": "com.amazonaws.ses#UpdateReceiptRule" }, { "target": "com.amazonaws.ses#UpdateTemplate" }, { "target": "com.amazonaws.ses#VerifyDomainDkim" }, { "target": "com.amazonaws.ses#VerifyDomainIdentity" }, { "target": "com.amazonaws.ses#VerifyEmailAddress" }, { "target": "com.amazonaws.ses#VerifyEmailIdentity" } ], "traits": { "aws.api#service": { "sdkId": "SES", "arnNamespace": "ses", "cloudFormationName": "SES", "cloudTrailEventSource": "ses.amazonaws.com", "endpointPrefix": "email" }, "aws.auth#sigv4": { "name": "ses" }, "aws.protocols#awsQuery": {}, "smithy.api#documentation": "Amazon Simple Email Service\n

This document contains reference information for the Amazon Simple Email Service (Amazon SES) API, version\n 2010-12-01. This document is best used in conjunction with the Amazon SES Developer\n Guide.

\n \n

For a list of Amazon SES endpoints to use in service requests, see Regions and\n Amazon SES in the Amazon SES Developer\n Guide.

\n
", "smithy.api#title": "Amazon Simple Email Service", "smithy.api#xmlNamespace": { "uri": "http://ses.amazonaws.com/doc/2010-12-01/" } } }, "com.amazonaws.ses#StopAction": { "type": "structure", "members": { "Scope": { "target": "com.amazonaws.ses#StopScope", "traits": { "smithy.api#documentation": "

The scope of the StopAction. The only acceptable value is RuleSet.

", "smithy.api#required": {} } }, "TopicArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the stop action is\n taken. An example of an Amazon SNS topic ARN is\n arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about\n Amazon SNS topics, see the Amazon SNS Developer Guide.

" } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action terminates the evaluation of the receipt\n rule set and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

\n

For information about setting a stop action in a receipt rule, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#StopScope": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "RuleSet", "name": "RULE_SET" } ] } }, "com.amazonaws.ses#Subject": { "type": "string" }, "com.amazonaws.ses#SubjectPart": { "type": "string" }, "com.amazonaws.ses#SuccessRedirectionURL": { "type": "string" }, "com.amazonaws.ses#Template": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the template. You will refer to this name when you send email using the\n SendTemplatedEmail or SendBulkTemplatedEmail\n operations.

", "smithy.api#required": {} } }, "SubjectPart": { "target": "com.amazonaws.ses#SubjectPart", "traits": { "smithy.api#documentation": "

The subject line of the email.

" } }, "TextPart": { "target": "com.amazonaws.ses#TextPart", "traits": { "smithy.api#documentation": "

The email body that will be visible to recipients whose email clients do not display\n HTML.

" } }, "HtmlPart": { "target": "com.amazonaws.ses#HtmlPart", "traits": { "smithy.api#documentation": "

The HTML body of the email.

" } } }, "traits": { "smithy.api#documentation": "

The content of the email, composed of a subject line, an HTML part, and a text-only\n part.

" } }, "com.amazonaws.ses#TemplateContent": { "type": "string" }, "com.amazonaws.ses#TemplateData": { "type": "string", "traits": { "smithy.api#length": { "min": 0, "max": 262144 } } }, "com.amazonaws.ses#TemplateDoesNotExistException": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName" }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the Template object you specified does not exist in your Amazon SES\n account.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#TemplateMetadata": { "type": "structure", "members": { "Name": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the template.

" } }, "CreatedTimestamp": { "target": "com.amazonaws.ses#Timestamp", "traits": { "smithy.api#documentation": "

The time and date the template was created.

" } } }, "traits": { "smithy.api#documentation": "

Contains information about an email template.

" } }, "com.amazonaws.ses#TemplateMetadataList": { "type": "list", "member": { "target": "com.amazonaws.ses#TemplateMetadata" } }, "com.amazonaws.ses#TemplateName": { "type": "string" }, "com.amazonaws.ses#TestRenderTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#TestRenderTemplateRequest" }, "output": { "target": "com.amazonaws.ses#TestRenderTemplateResponse" }, "errors": [ { "target": "com.amazonaws.ses#InvalidRenderingParameterException" }, { "target": "com.amazonaws.ses#MissingRenderingAttributeException" }, { "target": "com.amazonaws.ses#TemplateDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Creates a preview of the MIME content of an email when provided with a template and a\n set of replacement data.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#TestRenderTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the template that you want to render.

", "smithy.api#required": {} } }, "TemplateData": { "target": "com.amazonaws.ses#TemplateData", "traits": { "smithy.api#documentation": "

A list of replacement values to apply to the template. This parameter is a JSON\n object, typically consisting of key-value pairs in which the keys correspond to\n replacement tags in the email template.

", "smithy.api#required": {} } } } }, "com.amazonaws.ses#TestRenderTemplateResponse": { "type": "structure", "members": { "RenderedTemplate": { "target": "com.amazonaws.ses#RenderedTemplate", "traits": { "smithy.api#documentation": "

The complete MIME message rendered by applying the data in the TemplateData parameter\n to the template specified in the TemplateName parameter.

" } } } }, "com.amazonaws.ses#TextPart": { "type": "string" }, "com.amazonaws.ses#Timestamp": { "type": "timestamp" }, "com.amazonaws.ses#TlsPolicy": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Require", "name": "Require" }, { "value": "Optional", "name": "Optional" } ] } }, "com.amazonaws.ses#TrackingOptions": { "type": "structure", "members": { "CustomRedirectDomain": { "target": "com.amazonaws.ses#CustomRedirectDomain", "traits": { "smithy.api#documentation": "

The custom subdomain that will be used to redirect email recipients to the Amazon SES\n event tracking domain.

" } } }, "traits": { "smithy.api#documentation": "

A domain that is used to redirect email recipients to an Amazon SES-operated domain. This\n domain captures open and click events generated by Amazon SES emails.

\n

For more information, see Configuring\n Custom Domains to Handle Open and Click Tracking in the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#TrackingOptionsAlreadyExistsException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that a TrackingOptions object already exists in the specified configuration\n set.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the configuration set you specified already contains a TrackingOptions\n object.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#TrackingOptionsDoesNotExistException": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

Indicates that a TrackingOptions object does not exist in the specified configuration\n set.

" } }, "message": { "target": "com.amazonaws.ses#ErrorMessage" } }, "traits": { "smithy.api#documentation": "

Indicates that the TrackingOptions object you specified does not exist.

", "smithy.api#error": "client", "smithy.api#httpError": 400 } }, "com.amazonaws.ses#UpdateAccountSendingEnabled": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateAccountSendingEnabledRequest" }, "traits": { "smithy.api#documentation": "

Enables or disables email sending across your entire Amazon SES account in the current\n AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms to\n temporarily pause email sending across your Amazon SES account in a given AWS Region when\n reputation metrics (such as your bounce or complaint rates) reach certain\n thresholds.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateAccountSendingEnabledRequest": { "type": "structure", "members": { "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether email sending is enabled or disabled for your Amazon SES account in the\n current AWS Region.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to enable or disable the email sending capabilities for your\n entire Amazon SES account.

" } }, "com.amazonaws.ses#UpdateConfigurationSetEventDestination": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateConfigurationSetEventDestinationRequest" }, "output": { "target": "com.amazonaws.ses#UpdateConfigurationSetEventDestinationResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#EventDestinationDoesNotExistException" }, { "target": "com.amazonaws.ses#InvalidCloudWatchDestinationException" }, { "target": "com.amazonaws.ses#InvalidFirehoseDestinationException" }, { "target": "com.amazonaws.ses#InvalidSNSDestinationException" } ], "traits": { "smithy.api#documentation": "

Updates the event destination of a configuration set. Event destinations are\n associated with configuration sets, which enable you to publish email sending events to\n Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service (Amazon SNS). For information about using configuration sets,\n see Monitoring Your Amazon SES\n Sending Activity in the Amazon SES Developer Guide.\n

\n \n

When you create or update an event destination, you must provide one, and only\n one, destination. The destination can be Amazon CloudWatch, Amazon Kinesis Firehose, or Amazon Simple Notification Service\n (Amazon SNS).

\n
\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateConfigurationSetEventDestinationRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set that contains the event destination that you want to\n update.

", "smithy.api#required": {} } }, "EventDestination": { "target": "com.amazonaws.ses#EventDestination", "traits": { "smithy.api#documentation": "

The event destination object that you want to apply to the specified configuration\n set.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to update the event destination of a configuration set.\n Configuration sets enable you to publish email sending events. For information about\n using configuration sets, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#UpdateConfigurationSetEventDestinationResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#UpdateConfigurationSetReputationMetricsEnabled": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateConfigurationSetReputationMetricsEnabledRequest" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Enables or disables the publishing of reputation metrics for emails sent using a\n specific configuration set in a given AWS Region. Reputation metrics include bounce\n and complaint rates. These metrics are published to Amazon CloudWatch. By using CloudWatch, you can\n create alarms when bounce or complaint rates exceed certain thresholds.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateConfigurationSetReputationMetricsEnabledRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set that you want to update.

", "smithy.api#required": {} } }, "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether or not Amazon SES will publish reputation metrics for the configuration\n set, such as bounce and complaint rates, to Amazon CloudWatch.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to modify the reputation metric publishing settings for a\n configuration set.

" } }, "com.amazonaws.ses#UpdateConfigurationSetSendingEnabled": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateConfigurationSetSendingEnabledRequest" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Enables or disables email sending for messages sent using a specific configuration set\n in a given AWS Region. You can use this operation in conjunction with Amazon CloudWatch alarms\n to temporarily pause email sending for a configuration set when the reputation metrics\n for that configuration set (such as your bounce on complaint rate) exceed certain\n thresholds.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateConfigurationSetSendingEnabledRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set that you want to update.

", "smithy.api#required": {} } }, "Enabled": { "target": "com.amazonaws.ses#Enabled", "traits": { "smithy.api#documentation": "

Describes whether email sending is enabled or disabled for the configuration set.\n

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to enable or disable the email sending capabilities for a\n specific configuration set.

" } }, "com.amazonaws.ses#UpdateConfigurationSetTrackingOptions": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateConfigurationSetTrackingOptionsRequest" }, "output": { "target": "com.amazonaws.ses#UpdateConfigurationSetTrackingOptionsResponse" }, "errors": [ { "target": "com.amazonaws.ses#ConfigurationSetDoesNotExistException" }, { "target": "com.amazonaws.ses#InvalidTrackingOptionsException" }, { "target": "com.amazonaws.ses#TrackingOptionsDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Modifies an association between a configuration set and a custom domain for open and\n click event tracking.

\n

By default, images and links used for tracking open and click events are hosted on\n domains operated by Amazon SES. You can configure a subdomain of your own to handle these\n events. For information about using custom domains, see the Amazon SES Developer Guide.

" } }, "com.amazonaws.ses#UpdateConfigurationSetTrackingOptionsRequest": { "type": "structure", "members": { "ConfigurationSetName": { "target": "com.amazonaws.ses#ConfigurationSetName", "traits": { "smithy.api#documentation": "

The name of the configuration set for which you want to update the custom tracking\n domain.

", "smithy.api#required": {} } }, "TrackingOptions": { "target": "com.amazonaws.ses#TrackingOptions", "traits": { "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to update the tracking options for a configuration set.

" } }, "com.amazonaws.ses#UpdateConfigurationSetTrackingOptionsResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#UpdateCustomVerificationEmailTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateCustomVerificationEmailTemplateRequest" }, "errors": [ { "target": "com.amazonaws.ses#CustomVerificationEmailInvalidContentException" }, { "target": "com.amazonaws.ses#CustomVerificationEmailTemplateDoesNotExistException" }, { "target": "com.amazonaws.ses#FromEmailAddressNotVerifiedException" } ], "traits": { "smithy.api#documentation": "

Updates an existing custom verification email template.

\n

For more information about custom verification email templates, see Using Custom Verification Email Templates in the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateCustomVerificationEmailTemplateRequest": { "type": "structure", "members": { "TemplateName": { "target": "com.amazonaws.ses#TemplateName", "traits": { "smithy.api#documentation": "

The name of the custom verification email template that you want to update.

", "smithy.api#required": {} } }, "FromEmailAddress": { "target": "com.amazonaws.ses#FromAddress", "traits": { "smithy.api#documentation": "

The email address that the custom verification email is sent from.

" } }, "TemplateSubject": { "target": "com.amazonaws.ses#Subject", "traits": { "smithy.api#documentation": "

The subject line of the custom verification email.

" } }, "TemplateContent": { "target": "com.amazonaws.ses#TemplateContent", "traits": { "smithy.api#documentation": "

The content of the custom verification email. The total size of the email must be less\n than 10 MB. The message body may contain HTML, with some limitations. For more\n information, see Custom Verification Email Frequently Asked Questions in the Amazon SES\n Developer Guide.

" } }, "SuccessRedirectionURL": { "target": "com.amazonaws.ses#SuccessRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is successfully verified.

" } }, "FailureRedirectionURL": { "target": "com.amazonaws.ses#FailureRedirectionURL", "traits": { "smithy.api#documentation": "

The URL that the recipient of the verification email is sent to if his or her address\n is not successfully verified.

" } } }, "traits": { "smithy.api#documentation": "

Represents a request to update an existing custom verification email template.

" } }, "com.amazonaws.ses#UpdateReceiptRule": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateReceiptRuleRequest" }, "output": { "target": "com.amazonaws.ses#UpdateReceiptRuleResponse" }, "errors": [ { "target": "com.amazonaws.ses#InvalidLambdaFunctionException" }, { "target": "com.amazonaws.ses#InvalidS3ConfigurationException" }, { "target": "com.amazonaws.ses#InvalidSnsTopicException" }, { "target": "com.amazonaws.ses#LimitExceededException" }, { "target": "com.amazonaws.ses#RuleDoesNotExistException" }, { "target": "com.amazonaws.ses#RuleSetDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Updates a receipt rule.

\n

For information about managing receipt rules, see the Amazon SES\n Developer Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateReceiptRuleRequest": { "type": "structure", "members": { "RuleSetName": { "target": "com.amazonaws.ses#ReceiptRuleSetName", "traits": { "smithy.api#documentation": "

The name of the receipt rule set that the receipt rule belongs to.

", "smithy.api#required": {} } }, "Rule": { "target": "com.amazonaws.ses#ReceiptRule", "traits": { "smithy.api#documentation": "

A data structure that contains the updated receipt rule information.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to update a receipt rule. You use receipt rules to receive email\n with Amazon SES. For more information, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#UpdateReceiptRuleResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#UpdateTemplate": { "type": "operation", "input": { "target": "com.amazonaws.ses#UpdateTemplateRequest" }, "output": { "target": "com.amazonaws.ses#UpdateTemplateResponse" }, "errors": [ { "target": "com.amazonaws.ses#InvalidTemplateException" }, { "target": "com.amazonaws.ses#TemplateDoesNotExistException" } ], "traits": { "smithy.api#documentation": "

Updates an email template. Email templates enable you to send personalized email to\n one or more destinations in a single API operation. For more information, see the Amazon SES Developer\n Guide.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#UpdateTemplateRequest": { "type": "structure", "members": { "Template": { "target": "com.amazonaws.ses#Template", "traits": { "smithy.api#required": {} } } } }, "com.amazonaws.ses#UpdateTemplateResponse": { "type": "structure", "members": {} }, "com.amazonaws.ses#VerificationAttributes": { "type": "map", "key": { "target": "com.amazonaws.ses#Identity" }, "value": { "target": "com.amazonaws.ses#IdentityVerificationAttributes" } }, "com.amazonaws.ses#VerificationStatus": { "type": "string", "traits": { "smithy.api#enum": [ { "value": "Pending", "name": "Pending" }, { "value": "Success", "name": "Success" }, { "value": "Failed", "name": "Failed" }, { "value": "TemporaryFailure", "name": "TemporaryFailure" }, { "value": "NotStarted", "name": "NotStarted" } ] } }, "com.amazonaws.ses#VerificationToken": { "type": "string" }, "com.amazonaws.ses#VerificationTokenList": { "type": "list", "member": { "target": "com.amazonaws.ses#VerificationToken" } }, "com.amazonaws.ses#VerifyDomainDkim": { "type": "operation", "input": { "target": "com.amazonaws.ses#VerifyDomainDkimRequest" }, "output": { "target": "com.amazonaws.ses#VerifyDomainDkimResponse" }, "traits": { "smithy.api#documentation": "

Returns a set of DKIM tokens for a domain identity.

\n \n

When you execute the VerifyDomainDkim operation, the domain that you\n specify is added to the list of identities that are associated with your account.\n This is true even if you haven't already associated the domain with your account by\n using the VerifyDomainIdentity operation. However, you can't send email\n from the domain until you either successfully verify it or you\n successfully set up DKIM for\n it.

\n
\n

You use the tokens that are generated by this operation to create CNAME records. When\n Amazon SES detects that you've added these records to the DNS configuration for a domain, you\n can start sending email from that domain. You can start sending email even if you\n haven't added the TXT record provided by the VerifyDomainIdentity operation to the DNS\n configuration for your domain. All email that you send from the domain is authenticated\n using DKIM.

\n

To create the CNAME records for DKIM authentication, use the following values:

\n \n

In the preceding example, replace token with one of the tokens\n that are generated when you execute this operation. Replace\n example.com with your domain. Repeat this process for each\n token that's generated by this operation.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#VerifyDomainDkimRequest": { "type": "structure", "members": { "Domain": { "target": "com.amazonaws.ses#Domain", "traits": { "smithy.api#documentation": "

The name of the domain to be verified for Easy DKIM signing.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to generate the CNAME records needed to set up Easy DKIM with\n Amazon SES. For more information about setting up Easy DKIM, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#VerifyDomainDkimResponse": { "type": "structure", "members": { "DkimTokens": { "target": "com.amazonaws.ses#VerificationTokenList", "traits": { "smithy.api#documentation": "

A set of character strings that represent the domain's identity. If the identity is an\n email address, the tokens represent the domain of that address.

\n

Using these tokens, you need to create DNS CNAME records that point to DKIM public\n keys that are hosted by Amazon SES. Amazon Web Services eventually detects that you've updated your DNS\n records. This detection process might take up to 72 hours. After successful detection,\n Amazon SES is able to DKIM-sign email originating from that domain. (This only applies to\n domain identities, not email address identities.)

\n

For more information about creating DNS records using DKIM tokens, see the Amazon SES Developer\n Guide.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Returns CNAME records that you must publish to the DNS server of your domain to set up\n Easy DKIM with Amazon SES.

" } }, "com.amazonaws.ses#VerifyDomainIdentity": { "type": "operation", "input": { "target": "com.amazonaws.ses#VerifyDomainIdentityRequest" }, "output": { "target": "com.amazonaws.ses#VerifyDomainIdentityResponse" }, "traits": { "smithy.api#documentation": "

Adds a domain to the list of identities for your Amazon SES account in the current AWS\n Region and attempts to verify it. For more information about verifying domains, see\n Verifying Email\n Addresses and Domains in the Amazon SES Developer\n Guide.\n

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#VerifyDomainIdentityRequest": { "type": "structure", "members": { "Domain": { "target": "com.amazonaws.ses#Domain", "traits": { "smithy.api#documentation": "

The domain to be verified.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to begin Amazon SES domain verification and to generate the TXT\n records that you must publish to the DNS server of your domain to complete the\n verification. For information about domain verification, see the Amazon SES\n Developer Guide.

" } }, "com.amazonaws.ses#VerifyDomainIdentityResponse": { "type": "structure", "members": { "VerificationToken": { "target": "com.amazonaws.ses#VerificationToken", "traits": { "smithy.api#documentation": "

A TXT record that you must place in the DNS settings of the domain to complete domain\n verification with Amazon SES.

\n

As Amazon SES searches for the TXT record, the domain's verification status is \"Pending\".\n When Amazon SES detects the record, the domain's verification status changes to \"Success\". If\n Amazon SES is unable to detect the record within 72 hours, the domain's verification status\n changes to \"Failed.\" In that case, if you still want to verify the domain, you must\n restart the verification process from the beginning.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Returns a TXT record that you must publish to the DNS server of your domain to\n complete domain verification with Amazon SES.

" } }, "com.amazonaws.ses#VerifyEmailAddress": { "type": "operation", "input": { "target": "com.amazonaws.ses#VerifyEmailAddressRequest" }, "traits": { "smithy.api#documentation": "

Deprecated. Use the VerifyEmailIdentity operation to verify a new email\n address.

" } }, "com.amazonaws.ses#VerifyEmailAddressRequest": { "type": "structure", "members": { "EmailAddress": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address to be verified.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to begin email address verification with Amazon SES. For information\n about email address verification, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#VerifyEmailIdentity": { "type": "operation", "input": { "target": "com.amazonaws.ses#VerifyEmailIdentityRequest" }, "output": { "target": "com.amazonaws.ses#VerifyEmailIdentityResponse" }, "traits": { "smithy.api#documentation": "

Adds an email address to the list of identities for your Amazon SES account in the current\n AWS region and attempts to verify it. As a result of executing this operation, a\n verification email is sent to the specified address.

\n

You can execute this operation no more than once per second.

" } }, "com.amazonaws.ses#VerifyEmailIdentityRequest": { "type": "structure", "members": { "EmailAddress": { "target": "com.amazonaws.ses#Address", "traits": { "smithy.api#documentation": "

The email address to be verified.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

Represents a request to begin email address verification with Amazon SES. For information\n about email address verification, see the Amazon SES Developer\n Guide.

" } }, "com.amazonaws.ses#VerifyEmailIdentityResponse": { "type": "structure", "members": {}, "traits": { "smithy.api#documentation": "

An empty element returned on a successful request.

" } }, "com.amazonaws.ses#WorkmailAction": { "type": "structure", "members": { "TopicArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The Amazon Resource Name (ARN) of the Amazon SNS topic to notify when the WorkMail action\n is called. An example of an Amazon SNS topic ARN is\n arn:aws:sns:us-west-2:123456789012:MyTopic. For more information about\n Amazon SNS topics, see the Amazon SNS Developer Guide.

" } }, "OrganizationArn": { "target": "com.amazonaws.ses#AmazonResourceName", "traits": { "smithy.api#documentation": "

The ARN of the Amazon WorkMail organization. An example of an Amazon WorkMail\n organization ARN is\n arn:aws:workmail:us-west-2:123456789012:organization/m-68755160c4cb4e29a2b2f8fb58f359d7.\n For information about Amazon WorkMail organizations, see the Amazon WorkMail\n Administrator Guide.

", "smithy.api#required": {} } } }, "traits": { "smithy.api#documentation": "

When included in a receipt rule, this action calls Amazon WorkMail and, optionally,\n publishes a notification to Amazon Simple Notification Service (Amazon SNS). You will typically not use this action\n directly because Amazon WorkMail adds the rule automatically during its setup\n procedure.

\n

For information using a receipt rule to call Amazon WorkMail, see the Amazon SES Developer\n Guide.

" } } } }